Barudan Embroidery Machine Stops or Won’t Sew: Common Errors and Solutions
Barudan Embroidery Machine Stops or Won’t Sew: Common Errors and Solutions
When your Barudan embroidery machine stops mid-operation or refuses to sew, it can be frustrating and lead to lost time on your projects. This issue could stem from several factors, including threading issues, improper maintenance, or system errors. Fortunately, many of these problems have straightforward solutions. In this blog, we’ll explore the common reasons why a Barudan embroidery machine might stop or fail to sew, and provide practical solutions to get your machine back in working order.
1. Thread Breakage or Threading Errors
Error: One of the most common reasons for a Barudan machine to stop unexpectedly is thread breakage or improper threading, which triggers the machine‘s sensors to halt the operation.
Solution:
- Re-thread the upper thread and bobbin, ensuring the thread is correctly routed through all guides and tension discs.
- Check for any knots, tangles, or breaks in the thread, and use high-quality embroidery thread to reduce the risk of breakage.
- Make sure the needle is correctly installed, with the flat side facing the right direction as per Barudan’s instructions.
2. Needle Issues
Error: A bent, broken, or incorrectly installed needle can cause the machine to stop, as it won’t be able to complete the stitching process.
Solution:
- Replace the needle if it is bent, broken, or dull. Always use the correct needle size and type for the fabric and thread you’re working with.
- Ensure the needle is inserted fully into the needle clamp, with the flat side facing the correct direction.
- Regularly inspect and replace needles, especially after long embroidery sessions or complex designs.
3. Bobbin Case or Bobbin Issues
Error: Problems with the bobbin case or bobbin thread can prevent the machine from sewing or cause it to stop.
Solution:
- Remove the bobbin case and clean out any lint or debris that could be obstructing the bobbin thread.
- Ensure the bobbin is wound correctly, and that the bobbin thread is seated properly in the tension spring of the bobbin case.
- Replace a damaged or worn bobbin case, as it may interfere with the machine’s ability to sew smoothly.
4. Thread Tension Problems
Error: Incorrect thread tension can cause the machine to stop mid-sew, as it may trigger the thread sensors or lead to thread jams.
Solution:
- Adjust the upper thread tension using the machine’s tension control. Test different settings on a scrap piece of fabric to achieve the correct balance between the upper and bobbin threads.
- If the bobbin tension is too tight or loose, adjust it accordingly. Follow the manufacturer’s guidelines for setting the proper tension.
- Perform regular tension checks when changing fabrics, threads, or designs to avoid tension-related stoppages.
PROMOTIONAL SECTION
The All-in-One Solution For All Your Embroidery Business!
Enjoy $0.90 / 1000 Stitches Logo Digitizing
Monthly Cash Back, Free Delivery on Store-wide Products, Dedicated Account Manager, Exclusive Client Dashboard Panel, Bonus Credit & much more.
SIGN UP TODAY & GET FIRST 3 ORDER ABSOLUTELY FREE
Unlock game-changing benefits: expert digitizing services, technical embroidery guidance, seamless management of your business essentials, and free delivery on storewide products—all just for signing up with us. Don’t let these exclusive perks pass you by!
No Credit Card Required
Stay secure with no need to share your credit or debit card details! Experience 100% safe payment methods, including the option to purchase credits for your future orders. Plus, enjoy free credit as a bonus with every credit purchase and more exclusive benefits.
A Game-Changing Advantage
Imagine having a dedicated account manager by your side, ready to handle all your embroidery needs with precision and care. Whether it’s managing your digitizing orders, delivering essential embroidery supplies based on your every embroidery order, or sourcing those hard-to-find spare parts like motors, circuit boards, or sensors, we’ve got you covered. This incredible service ensures your business runs seamlessly, all at no extra cost or monthly fee.
It’s not just support—it’s the ultimate embroidery partnership you didn’t know you were missing for a $0 charge!
Exclusive Client Dashboard Panel
Get Free Account Setup (T&C Applied) and enjoy exclusive benefits: unlimited free estimate requests, streamlined order management, complimentary edit requests, 24/7 access to our ticket system, fast 6-12 hour turnaround times, round-the-clock email and live chat support, and 1-year free design file backup and more.
Recurring Monthly Cashback
Experience out of the box services with Cashback on monthly basis along with discount vouchers on Shop for Registered customers up to 60% on supplies, accessories, spare parts & sensors & Circuit boards and add extra value to your embroidery business.
Free Delivery on all Shop Products
Enjoy free delivery on embroidery supplies, accessories, spare parts, sensors & circuit boards, and store-products, delivered straight to your doorstep! Unlock this exclusive benefits by registering with us for all your digitizing needs. (Embroidery Machine Not Included)
5. Tripped Safety Sensors
Error: Barudan machines are equipped with safety sensors that automatically stop the machine if certain conditions aren’t met, such as a thread break, incorrect tension, or other issues.
Solution:
- Check the control panel for any error messages indicating which sensor was triggered. Common errors include thread breakage, needle malfunction, or fabric misalignment.
- Resolve the issue based on the error message, such as re-threading the machine, adjusting tension, or replacing the needle.
- Regularly inspect sensors and the control panel for any malfunctions, and reset the machine if necessary.
6. Machine Overheating
Error: Continuous embroidery over long periods may cause the machine to overheat, triggering a temporary stop to prevent damage to internal components.
Solution:
- Allow the machine to rest after extended embroidery sessions. Make sure it is located in a well-ventilated area to prevent overheating.
- Check that the cooling fans and air vents are not obstructed by dust or debris. Clean the machine regularly to ensure proper airflow.
- If overheating persists, contact a Barudan technician for professional servicing.
7. Power Supply Issues
Error: An unstable power supply, loose connections, or power surges can cause the machine to stop unexpectedly or prevent it from sewing.
Solution:
- Ensure the machine is plugged into a stable power source, ideally using a surge protector to guard against power fluctuations.
- Inspect the power cord and connections for any signs of damage or looseness. Replace any damaged cables or plugs immediately.
- If the machine continues to stop due to power issues, consult a technician to inspect the internal power connections.
8. Software or System Errors
Error: Internal software glitches or system errors in the Barudan embroidery machine can cause it to freeze, stop, or refuse to start sewing.
Solution:
- Turn off the machine, wait a few seconds, and restart it to reset the system.
- Check for any software updates from Barudan and install them to ensure the machine’s firmware is up to date.
- If the machine continues to experience system errors, contact Barudan customer support or a certified technician to troubleshoot and repair the issue.
9. Fabric or Design Compatibility Issues
Error: The machine may stop if the fabric being used is too thick, too thin, or incompatible with the design’s density, or if the design file is corrupted.
Solution:
- Ensure that the fabric is appropriate for the design you are working on. For thick or dense fabrics, consider reducing the design complexity or slowing down the machine’s speed.
- Use the correct stabilizer for the fabric to ensure proper hooping and smooth stitching.
- If the design file is causing issues, try loading another design to see if the problem persists. If the file is corrupted, reformat or replace the design file.
10. Broken Sensors
Barudan machines feature various sensors that detect issues like thread tension and bobbin thread levels. A faulty sensor might incorrectly signal an issue, causing the machine to stop.
Solution:
- Inspect and clean all sensors to remove any debris or blockages.
- If the issue continues, consult the user manual or seek professional servicing.
11. Check the Power Supply
Power fluctuations or loose connections can interrupt the machine’s operation.
Solution:
- Verify that the machine is properly plugged in and that the power cord is secure.
- Use a surge protector to safeguard against power surges.
- If using an extension cord, ensure it can handle the machine’s power requirements.
12. Inspect the Drive Belt
A worn or misaligned drive belt can cause the machine to stop mid-operation.
Solution:
- Open the machine’s casing (refer to the user manual for guidance) and inspect the drive belt.
- Replace the belt if it appears cracked, frayed, or loose.
- Consult a professional technician for proper alignment if needed.
13. Lubrication of Moving Parts
Lack of lubrication in critical areas can lead to friction, causing the machine to halt.
Solution:
- Use Barudan-approved machine oil to lubricate moving parts such as the needle bar and rotary hook.
- Avoid over-oiling, as excess oil can attract dust and lint.
- Follow the lubrication schedule outlined in the machine’s manual.
14. Verify the Hoop Placement
Improperly secured embroidery hoops can obstruct movement, leading to the machine stopping.
Solution:
- Check that the hoop is properly locked into place.
- Ensure the fabric is taut within the hoop without being overstretched.
- Use the correct hoop size for your design to prevent obstruction.
15. Examine the Machine’s Timing
A misaligned needle and hook timing can cause skipped stitches or the machine to stop.
Solution:
- Manually turn the handwheel to observe the timing between the needle and the hook.
- If misaligned, adjust the timing using the procedure in your manual or consult a professional technician.
16. Resetting the Machine
Sometimes, internal errors in the machine’s system can cause operational hiccups.
Solution:
- Turn off the machine and unplug it. Wait for 10 minutes before restarting.
- Perform a factory reset to clear any software glitches (refer to the manual for instructions).
- Re-enter your design settings after the reset.
17. Examine the Pedal or Button Controls
Faulty start/stop controls can prevent the machine from sewing.
Solution:
- Inspect the pedal or buttons for physical damage.
- Test the controls on another compatible machine if possible.
- Replace the faulty component if it doesn’t respond correctly.
18. Professional Servicing
If all troubleshooting steps fail, the issue may require expert attention.
Solution:
- Schedule maintenance with a certified Barudan technician.
- Keep a detailed record of the problem to help the technician diagnose the issue.
Preventive Care Tips
- Monitor Thread Path Regularly: Avoid tangles by inspecting the thread path before starting a project.
- Use Machine-Specific Accessories: Ensure bobbins, needles, and other accessories are compatible with your Barudan model.
- Test Designs First: Run a test on scrap material to identify potential issues in the design.
By taking these additional measures, you can resolve more complex issues and ensure your Barudan embroidery machine performs at its best. Regular maintenance, coupled with prompt troubleshooting, will keep your machine running smoothly and minimize downtime.
Conclusion
When your Barudan embroidery machine stops or refuses to sew, it’s important to troubleshoot systematically, checking for common issues like threading errors, tension problems, and software glitches. With regular maintenance, proper thread tension, and careful handling of the machine, you can minimize downtime and keep your Barudan machine running smoothly. Regular servicing and cleaning will also help prevent many of the issues that cause the machine to stop unexpectedly.
