The E62 error code on a Brother embroidery machine typically indicates that there is an issue with the motor that controls the movement of the embroidery frame. This error can occur if the motor is unable to move the frame due to an obstruction or if the motor itself is malfunctioning.

To fix the E62 error, you can try the following steps:

1. Power off the machine and unplug it from the power source.
2. Check the embroidery frame to make sure it is not obstructed or stuck in place. If it is, remove the obstruction or loosen any tight areas that may be blocking the movement of the frame.
3. Turn the handwheel on the machine to move the frame back and forth to see if it moves freely. If it does not move, check for any damage to the motor or belts.
4. If you are not able to diagnose or fix the issue yourself, it is recommended that you take the machine to a Brother authorized service center for repairs.

It is important to note that attempting to repair the machine yourself can be dangerous and may cause further damage. It is always best to consult with a trained technician for repairs.