Showing all 3 resultsSorted by latest
-30%
Barudan HT230290 Needle Bar Driver Fixing Base Block for BEAT, BEVT, BEDT, BENZ, BEXY Series
In stock
Original price was: $ 40.13.$ 28.09Current price is: $ 28.09.
IHSS57-36-10-RC/EC Nema23 1.2Nm Integrated Stepper Motor Driver for Tajima, Barudan, Ricoma, HappyJapan, SWF
In stock
Price range: $ 226.49 through $ 258.29
-30%
SFRM72-FU USB Floppy Emulator for Tajima, Barudan, Happy, ZSK, Brother, Melco, Feiya, Ricoma Embroidery
Barudan Embroidery Machine Spare Parts Electrical Embroidery Machines Embroidery Machine Accessories Tajima
In stock
Original price was: $ 92.99.$ 65.09Current price is: $ 65.09.
Barudan BEVT-Z1501CII parts map
Every part in the machine parts list, by assembly. Part numbers from the Barudan BEVT parts book.
40 / 1171parts in our shop
Head Bed A30 parts · 4 in shop
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| 23 | KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → |
| 1 | HS210020 | Lower shaft ×1 | |
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 21 | KF221040 | Middle bobbin for automatic feed oil ×1 | |
| 22 | KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 |
01a Head Bed A36 parts · 4 in shop
| KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → | |
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | ||
| SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | ||
| HS210020 | Lower shaft ×1 | ||
| KF221040 | Middle bobbin for automatic feed oil ×1 | ||
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 | |
| 51 | M5x20 | Hex.socket set screw | |
| 52 | M6x12 | Hex.socket flange bolt (chromate) | |
| 53 | M5x15 | Hex.socket bolt (with adhesive) | |
| 54 | M3x6 | Pan screw | |
| 55 | M4x5 | Screw(sm11/64 | |
| 55 | SM11/64 40x5 | Screw( |
01 A Head Bed A30 parts · 4 in shop
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| 23 | KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → |
| 1 | HS210020 | Lower shaft ×1 | |
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) correspond barrel frame ×1 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) correspond barrel frame ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 21 | KF221040 | Middle bobbin for automatic feed oil hsm-a(mq2l) ×1 | |
| 22 | KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 |
02c Thread Cut C22 parts · 4 in shop
| 7 | KL270091 | Thread away hook guide ×1 | $ 33.09 → |
| 8 | KL270101 | Thread away hook ×1 | $ 3.99 → |
| 53 | M4x12 | Hex.socket bolt (with spring washer) | $ 3.49 → |
| 56 | M3x8 | Truss screw | $ 35.99 → |
| 1 | A9056041 | Rotary solenoid ×1 | |
| 2 | KL270260C | Switch stay ×1 | |
| 3 | A9052028 | Proximity switch(rs-603) ×1 | |
| 4 | SG270081 | Thread away base ×1 | |
| 5 | KN272401 | Stopper eccentric ×1 | |
| 6 | KL270450 | Hook guide plate ×1 | |
| 9 | KL270131C | Lever connecting pin ×2 | |
| 10 | KL270120C | Connecting plate ×1 | |
| 11 | SG270090 | Thread away solenoid lever ×1 | |
| 12 | MR230020 | Arm(vt-cs) ×1 | |
| 13 | MK230030 | Oil save felt ×1 | |
| 14 | SJ250240 | Side cover(first head) dyhe ×1 | |
| 51 | M3x10 | Truss screw | |
| 52 | M3x6 | Truss screw (with plain washer) | |
| 55 | M4x16 | Truss screw | |
| 57 | M4x8 | Hex.socket set screw | |
| 59 | M8x25 | Hex.socket bolt | |
| 60 | M5x8 | Truss screw |
04b Needle Bar B35 parts · 3 in shop
| 23 | HT230340 | Cloth hold support rubber ×1 | $ 1.49 → |
| 24 | HT230290 | Needle bar beat fixing base ×1 | $ 28.09 → |
| 28 | RH230540 | Needle bar driver ×1 | $ 3.29 → |
| 1 | MH230140 | Slide shaft a'ssy(dt-zn) ×1 | |
| 2 | MH230180 | Oil core(210mm) ×1 | |
| 3 | MH230170 | Slide shaft(dt-zn) ×1 | |
| 4 | RD230150 | Driving shaft bush upper(bemax) ×1 | |
| 5 | HT230750 | Oil core(30mm) ×1 | |
| 6 | HT230471 | Small link pin ×1 | |
| 7 | HT230491C | Link(small) ×1 | |
| 8 | HT230730 | Shim ring( 10 t=0.3) ×2 | |
| 9 | RR230130 | Link roller joint pin ×1 | |
| 10 | RR230150 | Cloth hold roller ×1 | |
| 11 | RR230140 | Thrust washer ×1 | |
| 12 | HT230760 | Oil core(8mm) ×1 | |
| 13 | HB230201C | Needle bar driving link ×1 | |
| 14 | HT230510 | Needle bar driver slide block ×1 | |
| 15 | HT230770 | Oil core(20mm) ×1 | |
| 16 | HT230460 | Large link pin ×1 | |
| 17 | HT230480C | Link(large) ×1 | |
| 18 | HT230500 | Set slide block ×1 | |
| 19 | HP231370 | Square ball ×1 | |
| 20 | HT230320C | Square ball pin ×1 | |
| 21 | SG230000 | Oil receive plate ×1 | |
| 22 | RR230031C | Cloth hold support ×1 | |
| 25 | HT230520 | Needle bar driving stopper ×1 | |
| 26 | A9012368 | Spacer(roll bush) ×1 | |
| 27 | RH230550 | Shim ring ×1 | |
| 29 | HT230280C | Needle bar driver pin ×1 | |
| 30 | HT230560C | Needle bar driver return spring ×1 | |
| 31 | A9012415 | Double point screw m6×7(p0.75) ×1 | |
| 32 | SL230180 | Driving shaft bush (lower) ×1 | |
| 33 | LA230140 | Bearing guide ×1 | |
| 34 | SG230300C | Bearing pin ×1 | |
| 35 | A9010065 | Ball bearing 686zz ×1 |
Other Parts17 parts · 2 in shop
| 53 | M4x12 | Hex.socket bolt | $ 3.49 → |
| 56 | M3x8 | Flush screw | $ 35.99 → |
| 51 | M3x3 | Pan screw | |
| 51 | M6x10 | Truss screw | |
| 51 | M3x10 | Truss screw | |
| 52 | M3x6 | Truss screw | |
| 52 | M4x6 | Hex.socket bolt | |
| 52 | M3x18 | Hex.socket bolt | |
| 53 | M5x26 | Hex.socket bolt | |
| 54 | M4x8 | Hex.socket bolt | |
| 55 | M4x18 | Hex.socket bolt | |
| 55 | M4x16 | Truss screw | |
| 56 | M4x10 | Hex.socket bolt | |
| 57 | M3x5 | Hex.socket bolt | |
| 59 | M8x25 | Hex.socket bolt | |
| 60 | M5x6 | Hex.socket set screw | |
| 60 | M5x8 | Truss screw |
Contents4 parts · 1 in shop
| 04A-2 | Needle bar a (z15) | $ 39.09 → | |
| BEVT-Z1201CⅡ | Machine layout (bevt-z1201cⅡ) | ||
| BEVT-Z1501CⅡ | Machine layout (bevt-z1501cⅡ) | ||
| 04A-1 | Needle bar a (z12) |
Take Up Lever27 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 1 | MK230130 | Take up lever driving lever a'ssy ×1 | |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 5 | KF230501 | Take up lever roller a'ssy ×1 | |
| 6 | KF230680 | Cam followers $(kr\times4\times7.9\times15-1p\times1)$ ×1 | |
| 7 | HB230650 | Flush screw(with adhesion) ×1 | |
| 8 | MK230120 | Take up lever driving roller (erite pro.) ×1 | |
| 9 | RD230130C | Take up lever driving roller shaft ×1 | |
| 10 | HB230800 | Take up lever drive lever fixed pin set collar ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 15 | HB230080C | Washer for cam(2) ×1 | |
| 16 | HB230070C | Washer for cam(1) ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 18 | HB230620 | Flush screw ×3 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 | |
| 26 | A9010073 | Ball bearing(6005zz) ×1 | |
| 27 | A9012421 | C-ring for hole φ47 ×1 |
Needle Bar A(z12)25 parts · 1 in shop
| 2 | RD230490 | Needle bar guide ×12 | $ 12.09 → |
| 1 | RD230480 | Needle bar a'ssy ×12 | |
| 3 | RH230410C | Needle bar ×12 | |
| 4 | HT230251 | Needle bar spring(upper) ×12 | |
| 5 | HT230330 | Cloth hold set clamp ×12 | |
| 6 | HT230263 | Washer for set clamp ×12 | |
| 7 | A9014167 | O-ring ss065 ×24 | |
| 8 | SG230220 | Needle bar spring lower ×12 | |
| 9 | RD230370C | Cloth hold(zq4) ×12 | |
| 10 | KF232130 | O-ring(1b-as568-902) c03091b ×12 | |
| 11 | HT230120 | Washer 2.4 ×12 | |
| 12 | RH230440 | Needle clamp (with hook, set screw) ×12 | |
| 13 | RH230460 | Needle clamp screw ×12 | |
| 14 | RH230450 | Needle clamp (with hook) ×12 | |
| 15 | FN070011Q1 | Needle (dbxk5q1-ny11) ×12 | |
| 16 | SG230140 | Take up lever shaft(z12) ×1 | |
| 17 | MK230090 | Take up lever collar ×2 | |
| 18 | SG230360 | Slide block set ×1 | |
| 19 | SG230060 | Slide block ×1 | |
| 20 | SG230110 | Bearing plate ×1 | |
| 21 | SG230070 | Needle bar base ×1 | |
| 22 | MK230050 | Take up lever washer ×13 | |
| 23 | MK230040 | Take up lever ×12 | |
| 24 | SG230040 | Needle bar stocker ×1 | |
| 25 | SG230150 | Needle bar felt ×1 |
Needle Bar A (z15)26 parts · 1 in shop
| 13 | RD230490 | Needle bar guide ×15 | $ 12.09 → |
| 1 | SL230001 | Slide block set ×1 | |
| 2 | RD230060 | Bearing plate ×1 | |
| 3 | SL230021 | Slide block ×1 | |
| 4 | SL230090 | Slide block sim ×1 | |
| 5 | SL230031 | Needle bar base ×1 | |
| 6 | SL230070 | Take up lever shaft(zq6) ×1 | |
| 7 | MK230090 | Take up lever collar ×2 | |
| 8 | MK230050 | Take up lever washer ×16 | |
| 9 | MK230040 | Take up lever ×15 | |
| 10 | SL230040 | Needle bar stocker ×1 | |
| 11 | SL230080 | Needle bar felt ×1 | |
| 12 | RD230480 | Needle bar a'ssy ×15 | |
| 14 | RH230410C | Needle bar ×15 | |
| 15 | HT230251 | Needle bar spring(upper) ×15 | |
| 16 | HT230330 | Cloth hold set clamp ×15 | |
| 17 | HT230263 | Washer for set clamp ×15 | |
| 18 | A9014167 | O-ring ss065 ×30 | |
| 19 | SG230220 | Needle bar spring lower ×15 | |
| 20 | RD230370C | Cloth hold(zq4) ×15 | |
| 21 | KF232130 | O-ring(1b-as568-902) c03091b ×15 | |
| 22 | HT230120 | Washer 2.4 ×15 | |
| 23 | RH230440 | Needle clamp (with hook, set screw) ×15 | |
| 24 | RH230450 | Needle clamp (with hook) ×15 | |
| 25 | RH230460 | Needle clamp screw ×15 | |
| 26 | FN070011Q1 | Needle (dbxk5q1-ny11) ×15 |
06 Thread Guide27 parts · 1 in shop
| 19 | HT240290 | Tension wheel a'ssy ×15 | $ 36.49 → |
| 1 | PG240030 | Thread collar base a'ssy(vs-z15) ×1 | |
| 2 | RV240100 | Felt frame (dsh-zq) ×1 | |
| 3 | RV240110 | Felt(dsh-zq) ×1 | |
| 4 | PG240040 | Thread collar base(vs-z15) ×1 | |
| 5 | RV240180 | Tube holder(d-zq) ×1 | |
| 6 | A9012438 | Felt hold spacer (dsh-zq) ×2 | |
| 7 | MP240001 | Tension base a'ssy(vt-z15) ×1 | |
| 8 | EBY02612 | 8562 switch board with thread detection ×1 | |
| 9 | RR240660 | Led oil avoid rubber plate ×1 | |
| 10 | RR240330 | Switch board fixed base ×2 | |
| 11 | PG240020 | Tension base cover(vs-z15) ×1 | |
| 12 | A9068032 | Fcw clamp(fcw-26) ×1 | |
| 13 | HT240180 | Sm-nut ×15 | |
| 14 | HT240101 | Lower thread detection sensor disk(yn) ×15 | |
| 15 | KN540510 | Tension wheel nut ×15 | |
| 16 | FA999052 | Hex.nut sm11/64(with washers) ×15 | |
| 17 | PG240010 | Tension base case a'ssy (vs-z15) ×1 | |
| 18 | RR240300C | Tension a'ssy(ds) ×15 | |
| 20 | RR240510 | Thread spring adjusting plate ×15 | |
| 21 | RD240154 | Dial tension a'ssy(ds) ×15 | |
| 22 | RV240040 | Thread guide plate upper(dsh-zq) ×1 | |
| 23 | RV240050 | Thread guide plate lower(dsh-zq) ×1 | |
| 24 | RV240091 | Sponge rubber(dsh-zq) ×1 | |
| 25 | RV240062 | Second thread guide plate(dsh-zq) ×1 | |
| 26 | RV240081 | Tension base bracket l(dsh-zq) ×1 | |
| 27 | RV240071 | Tension base bracket r(dsh-zq) ×1 |
05 Jump9 parts · 1 in shop
| 7 | HT230220 | Needle bar stopper ×1 | $ 6.29 → |
| 1 | A9056039 | Rotary solenoid ×1 | |
| 2 | RD230250 | Jump solenoid fixing bracket ×1 | |
| 3 | HB240041 | Jump eccentric ×2 | |
| 4 | HB240020C | Jump solenoid lever ×1 | |
| 5 | HB240030C | Jump solenoid lever pin ×1 | |
| 6 | SG230260 | Needle bar stopper fixing bracket ×1 | |
| 8 | HT230620C | Needle bar stopper fixing pin ×1 | |
| 9 | MH230161C | Indication plate ×1 |
0316 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 9 | RD2301300 | Take up lever driving roller shaft ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 |
04a-216 parts · 1 in shop
| 13 | RD230490 | Needle bar guide ×15 | $ 12.09 → |
| 1 | SL230001 | Slide block set ×1 | |
| 2 | RD230060 | Bearing plate ×1 | |
| 3 | SL230021 | Slide block ×1 | |
| 4 | SL230090 | Slide block sim ×1 | |
| 5 | SL230031 | Needle bar base ×1 | |
| 6 | SL230070 | Take up lever shaft(zq6) ×1 | |
| 10 | SL230040 | Slide block sim ×1 | |
| 11 | SL230080 | Needle bar felt ×1 | |
| 12 | RD230480 | Needle bar a'ssy ×15 | |
| 14 | RH230410C | Needle bar ×15 | |
| 19 | SG230220 | Needle bar spring lower ×15 | |
| 20 | RD230370C | Cloth hold(zq4) ×15 | |
| 23 | RH230440 | Needle clamp (with hook, set screw) ×15 | |
| 24 | RH230450 | Needle clamp (with hook) ×15 | |
| 25 | RH230460 | Needle clamp screw ×15 |
10g Pantograph Drive G38 parts · 1 in shop
| 51 | M4×25 | Hex.bolt | $ 72.09 → |
| 1 | A9012052 | E-ring(φ10) ×1 | |
| 2 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 3 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 4 | HH481991C | Timing pulley shaft ×1 | |
| 5 | SJ480090 | V-pulley bracket ×1 | |
| 6 | MM480141 | V-sensor plate(vt) ×1 | |
| 7 | MS480170 | V-guide base plate (vt-01c ii) ×1 | |
| 8 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 9 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 10 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×2 | |
| 11 | SC480230 | V-slide block plate ×1 | |
| 12 | MM480160 | V-slide block r(dthe) ×1 | |
| 13 | A9010114 | Bearing(60/22zz) ×2 | |
| 14 | A9012447 | Stop ring s-22 ×2 | |
| 15 | MS480180 | Ball spline iko+pulley (s3m, p26) ×1 | |
| 16 | MM480170 | V-slide block l(dthe) ×1 | |
| 17 | MM480071 | H-sensor plate(vt-c) ×1 | |
| 18 | EDY00270 | Photointerrupter(gp1a75e) ×2 | |
| 19 | EP530241 | V-sensor cable(vt) ×1 | |
| 20 | MM480131 | V-sensor bracket(vt) ×1 | |
| 51 | Hex.bolt M4×25 | Hex.bolt m4×25 | |
| 52 | M5×15(Black) | Hex.socket bolt | |
| 52 | Hex.socket bolt M5×15(Black) | Hex.socket bolt m5×15(black) | |
| 53 | Hex.nut M8 | Hex.nut m8 | |
| 54 | Flush screw M3×6 | Flush screw m3×6 | |
| 55 | M3×14 | Flush screw | |
| 55 | Flush screw M3×14 | Flush screw m3×14 | |
| 56 | Flush screw M4×6 | Flush screw m4×6 | |
| 57 | Truss screw M4× | Truss screw m4× ×8 | |
| 58 | Truss screw M3×4 | Truss screw m3×4 | |
| 59 | Truss screw M3×8 | Truss screw m3×8 | |
| 60 | M4×14 | Truss screw | |
| 60 | Truss screw M4×14 | Truss screw m4×14 | |
| 61 | M4×10 | Hex.socket bolt | |
| 61 | Hex.socket bolt M4×10 | Hex.socket bolt m4×10 | |
| 62 | M4×12 | Hex.socket bolt | |
| 62 | Hex.socket bolt M4×12 | Hex.socket bolt m4×12 |
04 B Needle Bar B8 parts · 1 in shop
| 24 | HT230290 | Needle bar beat fixing base ×1 | $ 28.09 → |
| 1 | MH230140 | Slide shaft a'ssy(dt-zn) ×1 | |
| 2 | MH230180 | Oil core(210mm) ×1 | |
| 3 | MH230170 | Slide shaft(dt-zn) ×1 | |
| 19 | HP231370 | Square ball ×1 | |
| 20 | HT230320C | Square ball pin ×1 | |
| 29 | HT230280C | Needle bar driver pin ×1 | |
| 33 | LA230140 | Bearing guide ×1 |
03 Take Up Lever27 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 1 | MK230130 | Take up lever driving lever a'ssy ×1 | |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 5 | KF230501 | Take up lever roller a'ssy ×1 | |
| 6 | KF230680 | Cam followers $(kr\times4\times7.9\times15-1p\times1)$ ×1 | |
| 7 | HB230650 | Flush screw(with adhesion) ×1 | |
| 8 | MK230120 | Take up lever driving roller (erite pro.) ×1 | |
| 9 | RD230130C | Take up lever driving roller shaft ×1 | |
| 10 | HB230800 | Take up lever drive lever fixed pin set collar ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 15 | HB230080C | Washer for cam(2) ×1 | |
| 16 | HB230070C | Washer for cam(1) ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 18 | HB230620 | Flush screw ×3 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 | |
| 26 | A9010073 | Ball bearing(6005zz) ×1 | |
| 27 | A9012421 | C-ring for hole φ47 ×1 |
06-1 Thread Guide (z12)22 parts · 1 in shop
| 6 | HT240290 | Tension wheel a'ssy ×12 | $ 36.49 → |
| 1 | MS240010 | Tension base a'ssy (vt-z1201c ii) ×1 | |
| 2 | PN240010 | Tension base cover(vy-z12) ×1 | |
| 3 | A9068032 | Fcw clamp(fcw-26) ×1 | |
| 4 | SG240040 | Upper part thread guide plate(dsh-z12) ×1 | |
| 5 | RR240300C | Tension a'ssy(ds) ×12 | |
| 7 | RR240510 | Thread spring adjusting plate ×12 | |
| 8 | RD240154 | Dial tension a'ssy ×12 | |
| 9 | PF240010 | Tension base case a'ssy (vs-z12) ×1 | |
| 10 | SG240050 | Thread guide plate upper(dsh-z12) ×1 | |
| 11 | SG240060 | Thread guide plate lower(dsh-z12) ×1 | |
| 12 | SG240110 | Sponge rubber(dsh-z12) ×1 | |
| 13 | SG240070 | Second thread guide plate lower(dsh-z12) ×1 | |
| 14 | FA999052 | Hex.nut sm11/64(with washers) ×12 | |
| 15 | KN540510 | Tension wheel nut ×12 | |
| 16 | HT240101 | Lower thread detection sensor disk(yn) ×12 | |
| 17 | HT240180 | Sm-nut ×12 | |
| 18 | EBY02600 | 8580 switch board with thread detection ×1 | |
| 19 | RR240660 | Led oil avoid rubber plate ×1 | |
| 20 | RR240330 | Switch board fixed base(ds) ×2 | |
| 21 | SG240100 | Tension base bracket l(dsh-z12) ×1 | |
| 22 | SG240090 | Tension base bracket r(dsh-z12) ×1 |
02 A Thread Cut A29 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position bracket ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) barrel frame correspondence ×1 | |
| 3 | SJ270020 | Cylinder throat plate barrel frame correspondence ×1 | |
| 4 | HT270182 | Lower thread support stay(cylinder) cmp ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener (for cylinder) ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 |
04b10 parts · 1 in shop
| 28 | RH230540 | Needle bar driver ×1 | $ 3.29 → |
| 4 | RD230150 | Driving shaft bush upper(bemax) ×1 | |
| 9 | RR230130 | Link roller joint pin ×1 | |
| 10 | RR230150 | Cloth hold roller ×1 | |
| 11 | RR230140 | Thrust washer ×1 | |
| 21 | SG230000 | Oil receive plate ×1 | |
| 22 | RR230031C | Cloth hold support ×1 | |
| 27 | RH230550 | Shim ring ×1 | |
| 32 | SL230180 | Driving shaft bush (lower) ×1 | |
| 34 | SG230300C | Bearing pin ×1 |
04a-115 parts · 1 in shop
| 2 | RD230490 | Needle bar guide ×12 | $ 12.09 → |
| 1 | RD230480 | Needle bar a'ssy ×12 | |
| 3 | RH230410C | Needle bar ×12 | |
| 8 | SG230220 | Needle bar spring lower ×12 | |
| 9 | RD230370C | Cloth hold(zq4) ×12 | |
| 12 | RH230440 | Needle clamp (with hook, set screw) ×12 | |
| 13 | RH230460 | Needle clamp screw ×12 | |
| 14 | RH230450 | Needle clamp (with hook) ×12 | |
| 16 | SG230140 | Take up lever shaft(z12) ×1 | |
| 18 | SG230360 | Slide block set ×1 | |
| 19 | SG230060 | Slide block ×1 | |
| 20 | SG230110 | Bearing plate ×1 | |
| 21 | SG230070 | Needle bar base ×1 | |
| 24 | SG230040 | Needle bar stocker ×1 | |
| 25 | SG230150 | Needle bar felt ×1 |
02b Thread Cut B14 parts · 1 in shop
| 56 | M3x8 | Flush screw | $ 35.99 → |
| 1 | MM270060 | Thread cutter drive cover(dthe) ×1 | |
| 2 | A9052078 | Micro switch(d2vw-01l2a-1) ×1 | |
| 3 | A9012001 | Uniball joint(rd4020r) ×1 | |
| 4 | MM270040 | Thread cutter lever connecting rod(dthe) ×1 | |
| 5 | HP482260 | H-support roller fixed collar ×1 | |
| 6 | MM270030 | Thread cutter drive cam(dthe) ×1 | |
| 7 | MM270020 | Thread cutter motor bracket(dthe) ×1 | |
| 8 | MM270050 | Switch hold plate(dthe) ×1 | |
| 9 | EDY00600 | Thread cut motor (ts3617n473e24) ×1 | |
| 51 | M6x10 | Truss screw | |
| 52 | M3x18 | Hex.socket bolt (with washers) | |
| 53 | M5x26 | Hex.socket bolt (with washers) | |
| 55 | M4x6 | Hex.socket bolt |
02a Thread Cut A36 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 4 | HT270182 | Lower thread support stay( ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 | |
| 51 | M3x3 | Pan screw | |
| 52 | M4x6 | Hex.socket bolt | |
| 54 | M4x8 | Hex.socket bolt (with plain washer) | |
| 55 | M4x18 | Hex.socket bolt | |
| 56 | M4x10 | Hex.socket bolt | |
| 57 | M3x5 | Hex.socket bolt | |
| 60 | M5x6 | Hex.socket set screw |
01b Head Bed B9 parts · 1 in shop
| 53 | M4x12 | Hex.socket bolt | $ 3.49 → |
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 | |
| 51 | M4x8 | Hex.socket set screw | |
| 52 | M6x15 | Hex.socket bolt | |
| 54 | M5x5 | Hex.socket set screw |
Thread Cut A29 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 4 | HT270182 | Lower thread support stay(cylinder) cmp ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 |
01b1 parts
| 4 | SC250080 | Encoder safety cover ×1 |
04d14 parts
| 1 | MS230010 | Arm reinforcement bracket(vt-01c ii) ×1 | |
| 2 | MR230010 | Cap cover fixing plate ×1 | |
| 3 | RV230180 | Take up lever stocker ×1 | |
| 3 | SG230410 | Take up lever stocker(z12) ×1 | |
| 4 | MR230070 | Slide block fixed bracket(vt-cb ii only) ×1 | |
| 5 | SG230390 | Lmガイド(z12) ×1 | |
| 5 | SL230140 | Lmガイド (206) ×1 | |
| 6 | MS230030 | Cap cover set(vt-01c ii) ×1 set | |
| 7 | SG250060 | Oil holder felt ×1 | |
| 8 | MS230020 | Cap cover(vt-01c ii) ×1 | |
| 10 | RD270040 | Thread guard disk bracket upper ×1 | |
| 11 | RD270020 | Napped plate ×2 | |
| 11 | SG270100 | Napped plate ×2 | |
| 11 | SJ270100 | Napped plate ×2 |
02c6 parts
| 4 | SG270081 | Thread away base ×1 | |
| 4 | SJ270081 | Thread away base ×1 | |
| 11 | SG270090 | Thread away solenoid lever ×1 | |
| 11 | SJ270090 | Thread away solenoid lever ×1 | |
| 12 | MR230020 | Arm(vt-cs) ×1 | |
| 14 | SJ250240 | Side cover(first head) dyhe ×1 |
0816 parts
| 1 | MS310040 | Bearing case(main shaft) vt-01c ii ×1 | |
| 4 | MR310052 | Main shaft motor drive pulley (s3m,p=16) ×1 | |
| 5 | MS310030 | Main shaft motor fixed base(vt-01c ii) ×1 | |
| 9 | RQ310000 | Idler ×1 | |
| 11 | SC310021 | Idler shaft ×1 | |
| 12 | SC310030 | Idler bracket ×1 | |
| 13 | MR480230 | H-shaft motor timing pulley ×1 | |
| 14 | SC310062 | Lower shaft housing ×1 | |
| 15 | MS310020 | Lower shaft 15×776l (vt-01c ii) ×1 | |
| 16 | SC310150 | Tension bracket ×1 | |
| 18 | MS310060 | Rotary angle label(vt-01c ii) ×1 | |
| 19 | MS310010 | Upper shaft pulley (s3m, p60) vt-01c ii ×1 | |
| 20 | SC310071 | Upper shaft housing ×1 | |
| 21 | SG310090 | Upper shaft 420×740l(01c) ×1 | |
| 21 | SJ310090 | Upper shaft 420×740l(01c) ×1 | |
| 22 | MS310050 | Pulley box(vt-01cii) ×1 |
10c17 parts
| 1 | MS250020 | V-spline cover(vt-01c ii) ×1 | |
| 3 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 5 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 6 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 7 | SC250040 | H-rail frout cover ×1 | |
| 8 | SC250070 | H-rail side cover ×2 | |
| 9 | SC480040 | Lm guide(540l) ×1 | |
| 10 | RP480201 | Pulley stopper ×1 | |
| 12 | MR480180 | H-shaft drive pulley ×1 | |
| 13 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 14 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 16 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 17 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 18 | SJ480081 | Pulley bracket ×1 | |
| 20 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 25 | MS480010 | Guide base(r) vt-01c ii ×1 |
10d17 parts
| 1 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 4 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 5 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 6 | SC250040 | H-rail frout cover ×1 | |
| 7 | SC250070 | H-rail side cover ×2 | |
| 8 | SC480040 | L.m guide(540l) ×1 | |
| 9 | RP480201 | Pulley stopper ×1 | |
| 11 | MR480180 | H-shaft drive pulley ×1 | |
| 12 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 13 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 14 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 16 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 17 | SJ480081 | Pulley bracket ×1 | |
| 19 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 21 | MS480020 | Guide base(l) vt-01c ii ×1 | |
| 22 | SC480090 | Guide stay(l) ×1 |
10b3 parts
| 2 | SC730092 | Product pantograph stay a'ssy ×2 | |
| 7 | SC730102 | Stay bracket for compact machine ×2 | |
| 8 | SC730111 | Spacer ×2 |
10e7 parts
| 1 | MS480120 | Bearing support plate (h-shaft) vt-01c ii ×1 | |
| 2 | MS480130 | Hex.stay, 30l(h-shaft) vt-01ci ×4 | |
| 4 | MS480080 | H-pantograph drive shaft(1260l) vt-01c ii ×1 | |
| 5 | MR480230 | H-shaft motor timing pulley ×1 | |
| 7 | MS480090 | Pantograph drive motor pulley(s3m,p15) ×1 | |
| 8 | MS480110 | H-shaft motor fixed plate (vt-01c ii) ×1 | |
| 10 | MS480100 | H-shaft motor bracket(vt-01c i) ×1 |
04c9 parts
| 2 | RR230091 | Needle bar driving lever set(p25.65) ×1 | |
| 4 | RR230081 | Needle bar driving lever(p25.65) ×1 | |
| 13 | SG270050 | Thread support base ×1 | |
| 13 | SJ270050 | Thread support base ×1 | |
| 15 | SG270060 | Thread support lever ×1 | |
| 15 | SJ270060 | Thread support lever ×1 | |
| 16 | SG270070 | Thread support link ×1 | |
| 16 | SJ270070 | Thread support link ×1 | |
| 22 | MR510010 | Laser marker set(dot, cb ii) ×1 set |
06-115 parts
| 1 | MS240010 | Tension base a'ssy (vt-z1201c ii) ×1 | |
| 2 | PN240010 | Tension base cover(vy-z12) ×1 | |
| 4 | SG240040 | Upper part thread guide plate(dsh-z12) ×1 | |
| 5 | RR240300C | Tension a'ssy(ds) ×12 | |
| 7 | RR240510 | Thread spring adjusting plate ×12 | |
| 8 | RD240154 | Dial tension a'ssy ×12 | |
| 9 | PF240010 | Tension base case a'ssy (vs-z12) ×1 | |
| 10 | SG240050 | Thread guide plate upper(dsh-z12) ×1 | |
| 11 | SG240060 | Thread guide plate lower(dsh-z12) ×1 | |
| 12 | SG240110 | Sponge rubber(dsh-z12) ×1 | |
| 13 | SG240070 | Second thread guide plate lower(dsh-z12) ×1 | |
| 19 | RR240660 | Led oil avoid rubber plate ×1 | |
| 20 | RR240330 | Switch board fixed base(ds) ×2 | |
| 21 | SG240100 | Tension base bracket l(dsh-z12) ×1 | |
| 22 | SG240090 | Tension base bracket r(dsh-z12) ×1 |
00a12 parts
| 2 | SJ140120C | Table stand (dyhe) ×1 | |
| 3 | SJ140131 | Table stand bracket(dyhe-c) ×1 | |
| 4 | MS140010 | Table stand bracket 01c ii ×1 | |
| 5 | SJ140220 | Table stand fixed knob bolt ×1 | |
| 8 | MS110000 | Frame bevt-z1201c ii 450×520/520 ×1 | |
| 8 | MS160000 | Frame bevt-z1501c ii 450×520/520 ×1 | |
| 9 | SC140120 | Table stopper ×4 | |
| 10 | SJ140050 | Oil store(l) dyhe p=520 ×1 | |
| 11 | SJ140040 | Oil store(r) dyhe p=520 ×1 | |
| 14 | SC160031 | Mount base a'ssy (compact machine) ×4 | |
| 15 | SC160011 | Mount base(compact machine) ×4 | |
| 16 | SC160020 | Vibroisolating pad(compact machine) ×4 |
00b11 parts
| 2 | MS120000 | Table (servo machine) bevt-01c ii 450×520/52 ×1 | |
| 4 | SJ140250 | Table set bracket a'ssy (compact machine) ×2 set | |
| 5 | SJ140230 | Clamp plate holder ×2 | |
| 7 | SJ140240 | Clamp plate ×2 | |
| 9 | SC140140 | Table support(l=200) ×4 | |
| 10 | SC140090 | Table support angle ×1 | |
| 11 | SC210010 | Adjust nut m10 ×16 | |
| 13 | SJ140010 | Lh-table support bracket(dyhe) ×1 | |
| 14 | SC140030 | Lh-table support ×1 | |
| 15 | SC140020 | Rh-table support ×1 | |
| 16 | SJ140000 | Rh-table support bracket(dyhe) ×1 |
01a8 parts
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 |
073 parts
| 1 | MS330010 | Color change cover(vt-01c ii) ×1 | |
| 4 | MS330030 | Color change motor bracket(dthe) ×1 | |
| 9 | MS330020 | Color change base (dthe) ×1 |
10h10 parts
| 1 | MS480240 | Bearing case(v-shaft) vt-01c ii ×1 | |
| 4 | MS480090 | Pantograph drive motor pulley (s3m,p15) ×1 | |
| 5 | MS480230 | V-shaft motor fixed plate (vt-01c ii) ×1 | |
| 7 | MS480220 | V-shaft motor bracket(vt-01c ii) ×1 | |
| 8 | MS480210 | V-shaft motor base(vt-01c ii) ×1 | |
| 10 | MS480200 | V-shaft motor timing pulley (s3m,p60) ×1 | |
| 11 | MS480190 | Clamp(spline shaft) vt-01c ii ×2 | |
| 13 | SC480070 | H-rail side cover ×2 | |
| 16 | MS480260 | Pantograph drive pulley cover(vt-01c ii) ×1 | |
| 17 | MS480251 | Pantograph pulley rear cover(vt-01c ii) ×1 |
10f7 parts
| 2 | SC481120 | V-guide cover stad a ×4 | |
| 3 | SC481130 | V-guide cover stad b ×2 | |
| 4 | MS480160 | V-slide bracket(01c ii) st=520 ×1 | |
| 6 | MS480140 | V-guide pantograph frame a'ssy (vt-01c ii) st ×1 set | |
| 7 | SJ480120 | Lm guide(l=1000) ×1 | |
| 8 | MS480150 | V-guide pantograph frame (vt-01c ii) st=520 ×1 | |
| 9 | SC480830 | V-guide felt(l=155) ×3 |
11b2 parts
| 7 | MS510010 | Driver board base (vt-01c ii) ×1 | |
| 9 | MS510020 | Connecter joint panel (vt-01c ii) ×1 |
04e12 parts
| 1 | RV250070 | Arm upper cover ×1 | |
| 2 | PF250001 | Head cover(z12) ×1 | |
| 2 | PG250001 | Head cover(z15) ×1 | |
| 3 | RD240271 | Thread guard(with guide) ×1 | |
| 3 | SG240000 | Thread guard(with guide) ×1 | |
| 5 | SL270000 | Thread support apron a'ssy ×1 set | |
| 6 | SG270010 | Thread support apron ×1 | |
| 6 | SL270010 | Thread support apron ×1 | |
| 8 | SG270000 | Thread support clamp ×12 | |
| 11 | SL270030 | Thread holder spring support ×1 | |
| 12 | SL270040 | Thread holder spring fixed screw ×3 | |
| 13 | SL270020 | Thread holder spring ×1 |
10a4 parts
| 4 | SC730041 | Pantograph fixing plate ×2 | |
| 5 | SC730031 | Pantograph fixed spacer b ×2 | |
| 6 | MM730000 | Pantograph frame (for c01,450×520) ×1 | |
| 7 | MM730010 | Pantograph a'ssy (c01,450×520) ×1 |
052 parts
| 2 | RD230250 | Jump solenoid fixing bracket ×1 | |
| 6 | SG230260 | Needle bar stopper fixing bracket ×1 |
06-219 parts
| 1 | PG240030 | Thread collar base a'ssy(vs-z15) ×1 | |
| 2 | RV240100 | Felt frame (dsh-zq) ×1 | |
| 3 | RV240110 | Felt(dsh-zq) ×1 | |
| 4 | PG240040 | Thread collar base(vs-z15) ×1 | |
| 5 | RV240180 | Tube holder(d-zq) ×1 | |
| 7 | MP240001 | Tension base a'ssy(vt-z15) ×1 | |
| 9 | RR240660 | Led oil avoid rubber plate ×1 | |
| 10 | RR240330 | Switch board fixed base ×2 | |
| 11 | PG240020 | Tension base cover(vs-z15) ×1 | |
| 17 | PG240010 | Tension base case a'ssy (vs-z15) ×1 | |
| 18 | RR240300C | Tension a'ssy(ds) ×15 | |
| 20 | RR240510 | Thread spring adjusting plate ×15 | |
| 21 | RD240154 | Dial tension a'ssy(ds) ×15 | |
| 22 | RV240040 | Thread guide plate upper(dsh-zq) ×1 | |
| 23 | RV240050 | Thread guide plate lower(dsh-zq) ×1 | |
| 24 | RV240091 | Sponge rubber(dsh-zq) ×1 | |
| 25 | RV240062 | Second thread guide plate(dsh-zq) ×1 | |
| 26 | RV240081 | Tension base bracket l(dsh-zq) ×1 | |
| 27 | RV240071 | Tension base bracket r(dsh-zq) ×1 |
11b Control B15 parts
| 1 | MM250010 | Bridge cover(dthe) ×2 | |
| 2 | MM250030 | Frame cover(dthe) ×2 | |
| 3 | MM250050 | Work mindow cover ×1 | |
| 4 | EDY00440 | Cooling fan (vt servo) ×1 | |
| 5 | EDY00610 | Vt-01cⅡ servo ac driver set ×1 | |
| 6 | A9068052 | Locking guard spacer kgls-6rt ×5 | |
| 7 | MS510010 | Driver board base (vt-01cⅡ) ×1 | |
| 8 | EAY03230 | 11010 driver board(vt-servo) ×1 | |
| 9 | MS510020 | Connecter joint panel (vt-01cⅡ) ×1 | |
| 51 | Truss screw M6x10 | Truss screw m6x10 | |
| 52 | Truss screw M5x10 | Truss screw m5x10 | |
| 53 | Truss screw M4x6 | Truss screw m4x6 | |
| 54 | Truss screw M4x38 | Truss screw m4x38 | |
| 55 | Hex.nut M4(With washers) | Hex.nut m4(with washers) | |
| 56 | Hex.socket bolt M5x8(With washers) | Hex.socket bolt m5x8(with washers) |
12-12 parts
| 1 | MM710010 | Spool holder a'ssy(z1201c) ×1 | |
| 6 | SK710000 | Spool holder base block ×2 |
10c Pantograph Drive C40 parts
| 1 | MS250020 | V-spline cover(vt-01c ii) ×1 | |
| 2 | A9068152 | Super seal(nw-7s-p) ×1 | |
| 3 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 4 | A9011243 | Bearing unit(ufl002c) ×2 | |
| 5 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 6 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 7 | SC250040 | H-rail frout cover ×1 | |
| 8 | SC250070 | H-rail side cover ×2 | |
| 9 | SC480040 | Lm guide(540l) ×1 | |
| 10 | RP480201 | Pulley stopper ×1 | |
| 11 | HH481980 | 019 clamp ×1 | |
| 12 | MR480180 | H-shaft drive pulley ×1 | |
| 13 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 14 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 16 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 17 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 18 | SJ480081 | Pulley bracket ×1 | |
| 19 | HH481991C | Timing pulley shaft ×1 | |
| 20 | MS480070 | Pantograph drive pulley (front) ma3-32t ×1 | |
| 21 | A9012052 | E-ring(φ10) ×1 | |
| 22 | MM480050 | Guide stay(dthe) ×1 | |
| 23 | A9068153 | Super seal(nw-7s) ×1 | |
| 24 | A9068151 | Curl cord(compact machine) vy-c ×1 | |
| 25 | MS480010 | Guide base(r) vt-01c ii ×1 | |
| 51 | Hex.socket flange bolt M6×10 | Hex.socket flange bolt m6×10 | |
| 52 | Hex.socket bolt M5×15 (Chromate) | Hex.socket bolt m5×15 (chromate) | |
| 53 | Hex.socket bolt M6×20 (Chromate) | Hex.socket bolt m6×20 (chromate) | |
| 54 | Truss screw M4×6(Chromate) | Truss screw m4×6(chromate) | |
| 55 | Hex.socket bolt M4×10(Black) | Hex.socket bolt m4×10(black) | |
| 56 | Hex.socket bolt M4×12(With spring washer) | Hex.socket bolt m4×12(with spring washer) | |
| 57 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 58 | Hex.cap nut M8(Chromate) | Hex.cap nut m8(chromate) | |
| 59 | Hex.bolt M4×30(Chromate) | Hex.bolt m4×30(chromate) | |
| 60 | Hex.nut M4 | Hex.nut m4 | |
| 61 | Hex.bolt M4×40(Chromate) | Hex.bolt m4×40(chromate) | |
| 62 | Hex.socket bolt M4×12(With adhesion) | Hex.socket bolt m4×12(with adhesion) | |
| 63 | Flange nut M4 | Flange nut m4 | |
| 64 | Hex.socket bolt M3×12 (Black) | Hex.socket bolt m3×12 (black) | |
| 65 | Hex.socket bolt M3×15(Black) | Hex.socket bolt m3×15(black) |
04c Needle Bar C28 parts
| 1 | HT230590 | Lever pin block ×1 | |
| 2 | RR230091 | Needle bar driving lever set(p25.65) ×1 | |
| 3 | HB230271C | Needle bar driving lever fixing pin set collar ×1 | |
| 4 | RR230081 | Needle bar driving lever(p25.65) ×1 | |
| 5 | HB230281C | Needle bar driving lever fixing pin collar ×1 | |
| 6 | HT230410C | Needle bar driving lever fixing pin ×1 | |
| 7 | HB230262C | Needle bar driving lever connecting pin ×1 | |
| 8 | HB230220C | Needle bar driving lever pin(b) ×1 | |
| 9 | HT230420C | Guide plate ×1 | |
| 10 | MK230071 | K2 cam(012) ×1 | |
| 11 | MK230080C | Cam tap plate ×1 | |
| 12 | MM270000 | Thread support a'ssy(24v) dthe-zq ×1 set | |
| 13 | SG270050 | Thread support base ×1 | |
| 14 | A9014166 | Plug cushion rubber tm-96-6 ×1 | |
| 15 | SG270060 | Thread support lever ×1 | |
| 16 | SG270070 | Thread support link ×1 | |
| 17 | A9012127 | E-ring(43) ×2 | |
| 18 | SG270120 | Thread support return spring ×1 | |
| 19 | SG270110 | Thread support lever pin screw ×1 | |
| 20 | A9056042 | Keep solenoid(24v) tds-k10sl368- ×1 | |
| 21 | KC270101C | Solenoid pin ×1 | |
| 22 | MR510010 | Laser marker set(dot, cb ii) ×1 set | |
| 23 | EP535090 | Laser marker a'ssy(dot, cb ii) ×1 set | |
| 24 | MK510050 | Laser marker(lm-6501rc) ×1 | |
| 25 | A9014167 | O-ring(ss065) ×1 | |
| 26 | MK510100 | Laser marker support clip ×1 | |
| 27 | MK510061 | Laser marker fixing bracket ×1 | |
| 28 | A9068146 | Aluminum alloy cable clip(al2, misumi) ×1 |
04d Needle Bar D18 parts
| 1 | MS230010 | Arm reinforcement bracket(vt-01c ii) ×1 | |
| 2 | MR230010 | Cap cover fixing plate ×1 | |
| 3 | SG230410 | Take up lever stocker(z12) ×1 | |
| 3 | RV230180 | Take up lever stocker ×1 | |
| 4 | MR230070 | Slide block fixed bracket(vt-cb ii only) ×1 | |
| 5 | SG230390 | Lmガイド(z12) ×1 | |
| 5 | SL230140 | Lmガイド (zq6) ×1 | |
| 6 | MS230030 | Cap cover set(vt-01c ii) ×1 set | |
| 7 | SG250060 | Oil holder felt ×1 | |
| 8 | MS230020 | Cap cover(vt-01c ii) ×1 | |
| 9 | A9014168 | Rivet 42×11.5(brass) ×4 | |
| 10 | SG270040 | Thread guard disk bracket upper ×1 | |
| 10 | RD270040 | Thread guard disk bracket upper ×1 | |
| 11 | SG270100 | Napped plate ×2 | |
| 11 | RD270020 | Napped plate ×2 | |
| 12 | SG270030 | Thread guard disk bracket(z12) ×1 | |
| 12 | LA270080 | Thread guard disk bracket(zq-a) ×1 | |
| 13 | KX270070 | Thread guard disk spacer ×2 |
00b Table Frame B21 parts
| 1 | MM120010 | Encoder service cover (dthe) ×1 | |
| 2 | MS120000 | Table (servo machine) bevt-01c ii 450×520/52 ×1 | |
| 3 | HM140120 | Table stopper(front) ×4 | |
| 4 | SJ140250 | Table set bracket a'ssy (compact machine) ×2 set | |
| 5 | SJ140230 | Clamp plate holder ×2 | |
| 6 | A9014198 | Rubber foot(tk-16) ×2 | |
| 7 | SJ140240 | Clamp plate ×2 | |
| 8 | A9012493 | Wing nut m8(i) ×2 | |
| 9 | SC140140 | Table support(l=200) ×4 | |
| 10 | SC140090 | Table support angle ×1 | |
| 11 | SC210010 | Adjust nut m10 ×16 | |
| 12 | MM140001 | R-side stand table support(vt) ×1 | |
| 13 | SJ140010 | Lh-table support bracket(dyhe) ×1 | |
| 14 | SC140030 | Lh-table support ×1 | |
| 15 | SC140020 | Rh-table support ×1 | |
| 16 | SJ140000 | Rh-table support bracket(dyhe) ×1 | |
| 51 | M4x8 | Flush screw(under cut) | |
| 53 | M5x19 | Pierce screw | |
| 54 | M3x10 | Hex.socket bolt (spring washer) | |
| 55 | M6x12 | Hex.socket flange bolt (chromate) | |
| 56 | M5x10 | Hex.socket flange bolt (chromate) |
00a Table Frame A17 parts
| MS160000 | Frame bevt-z1501c ii 450×520/520 ×1 | ||
| 1 | A9014161 | Rubber foot for pipes(c-31-5) ×1 | |
| 2 | SJ140120C | Table stand (dyhe) ×1 | |
| 3 | SJ140131 | Table stand bracket(dyhe-c) ×1 | |
| 4 | MS140010 | Table stand bracket 01c ii ×1 | |
| 5 | SJ140220 | Table stand fixed knob bolt ×1 | |
| 6 | A9014163 | Color rubber foot(c-30-frb-3225) ×2 | |
| 7 | MM140030 | Support table catch stay(r) ×1 | |
| 8 | MS110000 | Frame bevt-z1201c ii 450×520/520 ×1 | |
| 9 | SC140120 | Table stopper ×4 | |
| 10 | SJ140050 | Oil store(l) dyhe p=520 ×1 | |
| 11 | SJ140040 | Oil store(r) dyhe p=520 ×1 | |
| 12 | MM140040 | Support table catch stay(l) ×1 | |
| 13 | A9019077 | Caster(stt-125gu m20x40) ×4 | |
| 14 | SC160031 | Mount base a'ssy (compact machine) ×4 | |
| 15 | SC160011 | Mount base(compact machine) ×4 | |
| 16 | SC160020 | Vibroisolating pad(compact machine) ×4 |
Head Bed B5 parts
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 |
01 B Head Bed B5 parts
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 |
07 Color Change20 parts
| 1 | MS330010 | Color change cover(vt-01c ii) ×1 | |
| 2 | MM330040 | Color change bracket(dthe) ×1 | |
| 3 | MG330090C | Manual connecting shaft ×1 | |
| 4 | MM330030 | Color change motor bracket(dthe) ×1 | |
| 5 | MG330110 | Color change motor (ts3617n111e24) ×1 | |
| 6 | MG330040 | Color change cam connecting shaft ×1 | |
| 7 | MG330030 | Color change cam ×1 | |
| 8 | A9010109 | Polyester slider(stw-ft150) ×1 | |
| 9 | MM330020 | Color change base (dthe) ×1 | |
| 10 | A9011285 | Du bush with flange (k5f1510-23) ×1 | |
| 11 | MG330080 | Color change set collar ×1 | |
| 12 | MF510010 | Potentiometer(m-22e10-050) ×1 | |
| 13 | MG330070 | Potentiometer fixed plate ×1 | |
| 14 | A9012127 | E-ring 43 ×7 | |
| 15 | A9010063 | Miniature bearing ×7 | |
| 16 | KX330160 | Connecting roller shaft ×7 | |
| 17 | MM330080 | Connecting block(z12) ×1 | |
| 17 | MG330010 | Connecting block(z15) ×1 | |
| 18 | MM330070 | Color change connecting base plate (vt-z1201c ×1 | |
| 18 | MM330010 | Color change connecting base plate (vt-z1501c ×1 |
08 Drive23 parts
| 1 | MS310040 | Bearing case(main shaft) vt-01c ii ×1 | |
| 2 | A9010138 | Ball bearing with snap ring (6201zznr) ×1 | |
| 3 | A9020241 | Timing belt(b150s3m1332) ×1 | |
| 4 | MR310052 | Main shaft motor drive pulley (s3m,p=16) ×1 | |
| 5 | MS310030 | Main shaft motor fixed base(vt-01c ii) ×1 | |
| 6 | EDY00430 | 200w servo moter(ts4747n3221e60) ×1 | |
| 7 | MM250030 | Frame cover(dthe) ×2 | |
| 8 | A9010003 | Bearing 6001zz ×2 | |
| 9 | RQ310000 | Idler ×1 | |
| 10 | A9012063 | C-ring(for hole φ28) ×1 | |
| 11 | SC310021 | Idler shaft ×1 | |
| 12 | SC310030 | Idler bracket ×1 | |
| 13 | MR480230 | H-shaft motor timing pulley ×1 | |
| 14 | SC310062 | Lower shaft housing ×1 | |
| 15 | MS310020 | Lower shaft φ15×776l (vt-01c ii) ×1 | |
| 16 | SC310150 | Tension bracket ×1 | |
| 17 | MM310070 | Angle instructions plate(dthe) ×1 | |
| 18 | MS310060 | Rotary angle label(vt-01c ii) ×1 | |
| 19 | MS310010 | Upper shaft pulley (s3m, p60) vt-01c ii ×1 | |
| 20 | SC310071 | Upper shaft housing ×1 | |
| 21 | SJ310090 | Upper shaft φ20×740l(01c) ×1 | |
| 22 | MS310050 | Pulley box(vt-01cii) ×1 | |
| 23 | 1SPP5205200 | Shaft mogol & cover(vt-01c) ×1 |
10a Pantograph Drive A7 parts
| 1 | KF730760 | Clip(150l) ×4 | |
| 2 | KF730750 | Clip(300l) ×4 | |
| 3 | A9012437 | Knob nut(φ32 m6 tap hole) ×2 | |
| 4 | SC730041 | Pantograph fixing plate ×2 | |
| 5 | SC730031 | Pantograph fixed spacer b ×2 | |
| 6 | MM730000 | Pantograph frame (for c01,450×520) ×1 | |
| 7 | MM730010 | Pantograph a'ssy (c01,450×520) ×1 |
10b Pantograph Drive B12 parts
| 1 | FR92460434520S | Square pantograph a'ssy 460×434 offset(p=520) ×1 | |
| 2 | SC730092 | Product pantograph stay a'ssy ×2 | |
| 3 | LA730650 | Product pantograph hold spring ×2 | |
| 4 | LA730610 | Positioning pin ×4 | |
| 5 | LA730630 | Slide plate ×2 | |
| 6 | LA730590 | Pantograph stay main body ×2 | |
| 7 | SC730102 | Stay bracket for compact machine ×2 | |
| 8 | SC730111 | Spacer ×2 | |
| 9 | A9012437C | Knob nut(φ32 m6 tap hole) ×2 | |
| 51 | Truss screw M3×10 | Truss screw m3×10 | |
| 52 | Truss screw M4×10 | Truss screw m4×10 | |
| 53 | Hex.socket set screw M3×8(With nylons) | Hex.socket set screw m3×8(with nylons) |
10d Pantograph Drive D36 parts
| 1 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 2 | A9011244 | Bearing unit(ufl002d) ×1 | |
| 3 | A9011243 | Bearing unit(ufl002c) ×1 | |
| 4 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 5 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 6 | SC250040 | H-rail frout cover ×1 | |
| 7 | SC250070 | H-rail side cover ×2 | |
| 8 | SC480040 | L.m guide(540l) ×1 | |
| 9 | RP480201 | Pulley stopper ×1 | |
| 10 | HH481980 | 019 clamp ×1 | |
| 11 | MR480180 | H-shaft drive pulley ×1 | |
| 12 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 13 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 14 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 16 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 17 | SJ480081 | Pulley bracket ×1 | |
| 18 | HH481991C | Timing pulley shaft ×1 | |
| 19 | MS480070 | Pantograph drive pulley (front) ma3-32t ×1 | |
| 20 | A9012052 | E-ring(φ10) ×1 | |
| 21 | MS480020 | Guide base(l) vt-01c ii ×1 | |
| 22 | SC480090 | Guide stay(l) ×1 | |
| 51 | Hex.socket bolt M5×15 (Chromate) | Hex.socket bolt m5×15 (chromate) | |
| 52 | Hex.socket bolt M6×20(Chromate) | Hex.socket bolt m6×20(chromate) | |
| 53 | Truss screw M4×6(Chromate) | Truss screw m4×6(chromate) | |
| 54 | Hex.socket bolt M4×10(Black) | Hex.socket bolt m4×10(black) | |
| 55 | Hex.socket bolt M4×12(With spring washer) | Hex.socket bolt m4×12(with spring washer) | |
| 56 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 57 | Hex.cap nut M8(Chromate) | Hex.cap nut m8(chromate) | |
| 58 | Hex.bolt M4×30(Chromate) | Hex.bolt m4×30(chromate) | |
| 59 | Hex.nut M4 | Hex.nut m4 | |
| 60 | Hex.bolt M4×40(Chromate) | Hex.bolt m4×40(chromate) | |
| 61 | Flange nut M4 | Flange nut m4 | |
| 62 | Hex.socket bolt M3×12(Black) | Hex.socket bolt m3×12(black) | |
| 63 | Hex.socket bolt M4×12(With adhesion) | Hex.socket bolt m4×12(with adhesion) | |
| 64 | Hex.socket bolt M3×15(Black) | Hex.socket bolt m3×15(black) |
12-210 parts
| 1 | PP710000 | Spool holder a'ssy(vy-z15) ×1 | |
| 2 | RD710370 | Hose hold bracket ×1 | |
| 3 | RD710340 | Guide base (15 needles) ×2 | |
| 4 | RD710330 | Thread guide base ×5 | |
| 5 | RD710380 | Number seal ×1 | |
| 6 | RD710361 | Pillar b ×2 | |
| 7 | RD710351 | Pillar a ×2 | |
| 10 | SC710010 | Spool holder base ×1 | |
| 11 | RV710050 | Db3-6×4 antistatic double wall tube ×Cut product | |
| 12 | MM710000 | Spool holder bracket(type 2 piece) $p=520$ ×1 |
10e Pantograph Drive E17 parts
| 1 | MS480120 | Bearing support plate (h-shaft) vt-01c ii ×1 | |
| 2 | MS480130 | Hex.stay, 30l(h-shaft) vt-01ci ×4 | |
| 3 | A9010138 | Ball bearing with snap ring(6201zznr) ×1 | |
| 4 | MS480080 | H-pantograph drive shaft(1260l) vt-01c ii ×1 | |
| 5 | MR480230 | H-shaft motor timing pulley ×1 | |
| 6 | A9020242 | H-pantograph drive timing belt(b150s3m405) ×1 | |
| 7 | MS480090 | Pantograph drive motor pulley(s3m,p15) ×1 | |
| 8 | MS480110 | H-shaft motor fixed plate (vt-01c ii) ×1 | |
| 9 | EDY00430 | 200w servo moter (ts4747n3221e60) ×1 | |
| 10 | MS480100 | H-shaft motor bracket(vt-01c i) ×1 | |
| 51 | Hex.socket bolt M4x12(Black) | Hex.socket bolt m4x12(black) | |
| 52 | Hex.socket bolt M5x14 (Black) | Hex.socket bolt m5x14 (black) | |
| 53 | Hex.socket set screw M5 6(Black) | Hex.socket set screw m5 6(black) | |
| 54 | Hex.socket bolt M5x12(Black) | Hex.socket bolt m5x12(black) | |
| 55 | Hex.bolt M6x20(Chromate) | Hex.bolt m6x20(chromate) | |
| 56 | Hex.nut M6(Chromate) | Hex.nut m6(chromate) | |
| 57 | Hex.socket bolt M4x16(Black) | Hex.socket bolt m4x16(black) |
10f Pantograph Drive F15 parts
| 1 | MM480150 | V-guide cover(dthe) ×1 | |
| 2 | SC481120 | V-guide cover stad a ×4 | |
| 3 | SC481130 | V-guide cover stad b ×2 | |
| 4 | MS480160 | V-slide bracket(01c ii) st=520 ×1 | |
| 5 | KN272401 | Stopper eccentric ×2 | |
| 6 | MS480140 | V-guide pantograph frame a'ssy (vt-01c ii) st ×1 set | |
| 7 | SJ480120 | Lm guide(l=1000) ×1 | |
| 8 | MS480150 | V-guide pantograph frame (vt-01c ii) st=520 ×1 | |
| 9 | SC480830 | V-guide felt(l=155) ×3 | |
| 51 | Hex.cap nut M4 | Hex.cap nut m4 | |
| 52 | Spring washer M4 | Spring washer m4 | |
| 53 | Plain washer M4 | Plain washer m4 | |
| 54 | Flush screw M4x10 | Flush screw m4x10 | |
| 55 | Hex.socket bolt M4x22(Black) | Hex.socket bolt m4x22(black) | |
| 56 | Hex.socket bolt M4x15(Black) | Hex.socket bolt m4x15(black) |
10h Pantograph Drive H43 parts
| 1 | MS480240 | Bearing case(v-shaft) vt-01c ii ×1 | |
| 2 | A9010138 | Ball bearing with snap ring (6201zznr) ×1 | |
| 3 | A9020243 | V-pantograph drive timing belt(b150s3m330) ×1 | |
| 4 | MS480090 | Pantograph drive motor pulley (s3m,p15) ×1 | |
| 5 | MS480230 | V-shaft motor fixed plate (vt-01c ii) ×1 | |
| 6 | EDY00430 | 200w servo moter(ts4747n3221e60) ×1 | |
| 7 | MS480220 | V-shaft motor bracket(vt-01c ii) ×1 | |
| 8 | MS480210 | V-shaft motor base(vt-01c ii) ×1 | |
| 9 | HH481980 | φ19 clamp ×1 | |
| 10 | MS480200 | V-shaft motor timing pulley (s3m,p60) ×1 | |
| 11 | MS480190 | Clamp(spline shaft) vt-01c ii ×2 | |
| 12 | A9011310 | Pillow unit(ucp201e4) ×1 | |
| 13 | SC480070 | Spline bearing bracket ×2 | |
| 14 | MM140001 | R-side stand table support(vt) ×1 | |
| 15 | A9011271 | Pillow unit(ucp201de4) ×1 | |
| 16 | MS480260 | Pantograph drive pulley cover(vt-01c ii) ×1 | |
| 17 | MS480251 | Pantograph pulley rear cover(vt-01c ii) ×1 | |
| 18 | EDY00270 | Photointerrupter(gp1a75e) ×2 | |
| 19 | EP530231 | H-sensor cable(vt) ×1 | |
| 20 | MM480061 | H-sensor bracket(vt) ×1 | |
| 51 | M5×10(Black) | Hex.socket bolt | |
| 51 | Hex.socket bolt M5×10(Black) | Hex.socket bolt m5×10(black) | |
| 52 | Hex.socket set screw M5×6(Black) | Hex.socket set screw m5×6(black) | |
| 52 | M5×6(Black) | Hex.socket set screw | |
| 53 | Hex.nut M6(Chromate) | Hex.nut m6(chromate) | |
| 53 | M6(Chromate) | Hex.nut | |
| 54 | Hex.bolt M6×20(Chromate) | Hex.bolt m6×20(chromate) | |
| 54 | M6×20(Chromate) | Hex.bolt | |
| 55 | Hex.socket bolt M4×12(Spring washer) (Black) | Hex.socket bolt m4×12(spring washer) (black) | |
| 55 | M4×12(Spring washer) (Black) | Hex.socket bolt | |
| 56 | M5×15(Black) | Hex.socket bolt | |
| 56 | Hex.socket bolt M5×15(Black) | Hex.socket bolt m5×15(black) | |
| 57 | M5×20(Black) | Hex.socket bolt | |
| 57 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 58 | M8×25(Black) | Hex.socket bolt | |
| 58 | Hex.socket bolt M8×25(Black) | Hex.socket bolt m8×25(black) | |
| 59 | M6×18 | Hex.socket bolt | |
| 59 | Hex.socket bolt M6×18 | Hex.socket bolt m6×18 | |
| 60 | M6×12(Chromate) | Hex.socket flange bolt | |
| 60 | Hex.socket flange bolt M6×12(Chromate) | Hex.socket flange bolt m6×12(chromate) | |
| 61 | Truss screw M5×8 | Truss screw m5×8 | |
| 62 | Truss screw M3×8 | Truss screw m3×8 | |
| 63 | Truss screw M4×8 | Truss screw m4×8 |
11a Control A21 parts
| EAY092A11 | Vt-2 automat (w/usb reader) ×1 | ||
| 1 | EAY092A1 | Vt automat (w/cf reader ×1 | |
| 2 | MS510050 | Emergency stop switch a'ssy(vt-01cⅡ) ×1 | |
| 3 | MR510002 | Emergency stop switch fixing plate ×1 | |
| 4 | MS510040 | Automat bracket(vt-01c ii) ×1 | |
| 5 | MM510070 | Controller fixed stay(dthe) ×1 | |
| 6 | MS510030 | Power box set bracket(vt-01cⅡ) ×4 | |
| 7 | EDY00460 | Vt servo 11020 power unit ×1 | |
| 51 | Hex.socket bolt M4x5 | Hex.socket bolt m4x5 | |
| 51 | M4x5 | Hex.socket bolt | |
| 52 | M4x10 | Pan screw | |
| 52 | Pan screw M4x10 | Pan screw m4x10 | |
| 53 | Hex.socket flange bolt M5x12 | Hex.socket flange bolt m5x12 | |
| 53 | M5x12 | Hex.socket flange bolt | |
| 54 | Hex.socket flange bolt M4x10 | Hex.socket flange bolt m4x10 | |
| 55 | M6x15 | Hex.socket bolt | |
| 55 | Hex.socket bolt M6x15 | Hex.socket bolt m6x15 | |
| 56 | M5x8 | Truss screw | |
| 56 | Truss screw M5x8 | Truss screw m5x8 | |
| 57 | M3x6 | Truss screw | |
| 57 | Truss screw M3x6 | Truss screw m3x6 |
12-1 Accessories(z12)14 parts
| 1 | MM710010 | Spool holder a'ssy(z1201c) ×1 | |
| 2 | HT240480 | Thread guide ceramic(white) ×26 | |
| 2 | HT240490 | Thread guide ceramic(gray) ×4 | |
| 3 | HP241430 | Second tension unit complete ×12 | |
| 4 | KF710390 | Spool holder felt(8×34×470) ×12 | |
| 5 | HT710000 | Spool holder rod ×12 | |
| 6 | SK710000 | Spool holder base block ×2 | |
| 7 | SH710010 | Spool holder plate(dyh-z12) ×2 | |
| 51 | Hex.socket bolt M5×10(With spring washer) | Hex.socket bolt m5×10(with spring washer) | |
| 52 | Hex.socket set screw M5×8 | Hex.socket set screw m5×8 | |
| 53 | Flush screw M4×8 | Flush screw m4×8 | |
| 54 | Hex.socket flang bolt M6×25 | Hex.socket flang bolt m6×25 | |
| 55 | Hex.socket set screw M6×8 | Hex.socket set screw m6×8 | |
| 56 | Hex.socket bolt M6×15(Black) | Hex.socket bolt m6×15(black) |
12-2 Accessories (z15)12 parts
| 1 | PP710000 | Spool holder a'ssy(vy-z15) ×1 | |
| 2 | RD710370 | Hose hold bracket ×1 | |
| 3 | RD710340 | Guide base (15 needles) ×2 | |
| 4 | RD710330 | Thread guide base ×5 | |
| 5 | RD710380 | Number seal ×1 | |
| 6 | RD710361 | Pillar b ×2 | |
| 7 | RD710351 | Pillar a ×2 | |
| 8 | KF710390 | Spool holder felt(8×34×470) ×15 | |
| 9 | HT710000 | Spool holder pin ×15 | |
| 10 | SC710010 | Spool holder base ×1 | |
| 11 | RV710050 | Db3-6×4 antistatic double wall tube | |
| 12 | MM710000 | Spool holder bracket(type 2 piece) p=520 ×1 |
12-1 Accessories (z12)2 parts
| 3 | HP241430 | Second tension unit complete ×12 | |
| 4 | KF710390 | Spool holder felt(8×34×470) ×12 |
04a-1 Needle Bar A(z12)5 parts
| 4 | HT230251 | Needle bar spring(upper) ×12 | |
| 5 | HT230330 | Cloth hold set clamp ×12 | |
| 6 | HT230263 | Washer for set clamp ×12 | |
| 10 | KF232130 | O-ring(1b-as568-902) c03091b ×12 | |
| 11 | HT230120 | Washer 2.4 ×12 |
04a-2 Needle Bar A (z15)5 parts
| 15 | HT230251 | Needle bar spring(upper) ×15 | |
| 16 | HT230330 | Cloth hold set clamp ×15 | |
| 17 | HT230263 | Washer for set clamp ×15 | |
| 21 | KF232130 | O-ring(1b-as568-902) c03091b ×15 | |
| 22 | HT230120 | Washer 2.4 ×15 |
10g10 parts
| 2 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 3 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 5 | SJ480090 | V-pulley bracket ×1 | |
| 7 | MS480170 | V-guide base plate (vt-01c ii) ×1 | |
| 8 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 9 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 10 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×2 | |
| 11 | SC480230 | V-slide block plate ×1 | |
| 15 | MS480180 | Ball spline iko+pulley (s3m, p26) ×1 | |
| 16 | MM480170 | V-slide block l(dthe) ×1 |
11a5 parts
| 2 | MS510050 | Emergency stop switch a'ssy(vt-01cⅡ) ×1 | |
| 3 | MR510002 | Emergency stop switch fixing plate ×1 | |
| 4 | MS510040 | Automat bracket(vt-01c ii) ×1 | |
| 5 | MM510070 | Controller fixed stay(dthe) ×1 | |
| 6 | MS510030 | Power box set bracket(vt-01cⅡ) ×4 |
02a11 parts
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 2 | SG270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SG270020 | Cylinder throat plate ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 5 | SG270110 | Lower thread support hook and loop fastener ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SG270040 | Fixed knife barrel frame correspondence ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 8 | SG270030 | Driving knife barrel frame correspondence ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 |
Part numbers are listed for identification. Check the part number on your machine or use the free compatibility check before ordering.
