Showing all 3 resultsSorted by latest
Barudan BEVT Parts
Spare parts listed for the Barudan BEVT: motors & drivers, floppy, usb & memory and more. Check the part number and fit on each listing, or ask ISA with a photo. 3 items in stock, import duty included.
-30%
Barudan HT230290 Needle Bar Driver Fixing Base Block for BEAT, BEVT, BEDT, BENZ, BEXY Series
In stock
Original price was: $ 40.13.$ 28.09Current price is: $ 28.09.
IHSS57-36-10-RC/EC Nema23 1.2Nm Integrated Stepper Motor Driver for Tajima, Barudan, Ricoma, HappyJapan, SWF
In stock
Price range: $ 226.49 through $ 258.29
-30%
SFRM72-FU USB Floppy Emulator for Tajima, Barudan, Happy, ZSK, Brother, Melco, Feiya, Ricoma Embroidery
Barudan Embroidery Machine Spare Parts Electrical Embroidery Machines Embroidery Machine Accessories Tajima
In stock
Original price was: $ 92.99.$ 65.09Current price is: $ 65.09.
Barudan BEVT-Z1501CII parts map
Every part in the machine parts list, by assembly. Part numbers from the Barudan BEVT parts book.
40 / 1171parts in our shop
Head Bed A30 parts · 4 in shop
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| 23 | KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → |
| 1 | HS210020 | Lower shaft ×1 | |
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 21 | KF221040 | Middle bobbin for automatic feed oil ×1 | |
| 22 | KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 |
01a Head Bed A36 parts · 4 in shop
| KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → | |
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | ||
| SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | ||
| HS210020 | Lower shaft ×1 | ||
| KF221040 | Middle bobbin for automatic feed oil ×1 | ||
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 | |
| 51 | M5x20 | Hex.socket set screw | |
| 52 | M6x12 | Hex.socket flange bolt (chromate) | |
| 53 | M5x15 | Hex.socket bolt (with adhesive) | |
| 54 | M3x6 | Pan screw | |
| 55 | M4x5 | Screw(sm11/64 | |
| 55 | SM11/64 40x5 | Screw( |
01 A Head Bed A30 parts · 4 in shop
| 21 | KF220700 | Rotating hook hsl-atr(m1qts) ×1 | $ 27.09 → |
| 22 | KF220530 | Bobbin ×1 | $ 25.49 → |
| 23 | KF221020 | Bobbin case(4b19-s6-ba) ×1 | $ 66.29 → |
| 23 | KF220302 | Bobbin case bc-dbm(z2)-nbl5 middle bobbin ×1 | $ 14.99 → |
| 1 | HS210020 | Lower shaft ×1 | |
| 1 | HS210021 | Lower shaft ×1 | |
| 2 | KF220290 | Lower shaft collar ×1 | |
| 3 | KF220230 | Lower shaft metal (front) ×1 | |
| 4 | HS220010 | Lower shaft metal(cylinder back side) ×1 | |
| 5 | HT220061 | Thrust washer (lower shaft) ×1 | |
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 7 | A9014059 | Gromet mg(mg-1) ×1 | |
| 8 | KL220140 | Oil felt c(5x25x20) ×2 | |
| 9 | KX250081 | Throat plate set screw (hex.socket depth 2.2) ×7 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 11 | HS210042 | Bed cover ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 13 | HP321090C | Lower shaft connecting shaft collar ×1 | |
| 14 | A9011111 | Needle bearing(tla-2012z) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) correspond barrel frame ×1 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) correspond barrel frame ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 | |
| 19 | KC250483 | Barrel bed cover hold spring ×1 | |
| 20 | KF220240 | Vertical shaft metal(upper) ×1 | |
| 21 | KF221040 | Middle bobbin for automatic feed oil hsm-a(mq2l) ×1 | |
| 22 | KF220421 | Bobbin (hsm) (dbm) (for aluminum, middle bobbin ×1 | |
| 24 | HS210031 | Barrel bed cover (short type) ×1 | |
| 25 | A9012490 | Hinge(th-tm-72) ×1 |
02c Thread Cut C22 parts · 4 in shop
| 7 | KL270091 | Thread away hook guide ×1 | $ 33.09 → |
| 8 | KL270101 | Thread away hook ×1 | $ 3.99 → |
| 53 | M4x12 | Hex.socket bolt (with spring washer) | $ 3.49 → |
| 56 | M3x8 | Truss screw | $ 35.99 → |
| 1 | A9056041 | Rotary solenoid ×1 | |
| 2 | KL270260C | Switch stay ×1 | |
| 3 | A9052028 | Proximity switch(rs-603) ×1 | |
| 4 | SG270081 | Thread away base ×1 | |
| 5 | KN272401 | Stopper eccentric ×1 | |
| 6 | KL270450 | Hook guide plate ×1 | |
| 9 | KL270131C | Lever connecting pin ×2 | |
| 10 | KL270120C | Connecting plate ×1 | |
| 11 | SG270090 | Thread away solenoid lever ×1 | |
| 12 | MR230020 | Arm(vt-cs) ×1 | |
| 13 | MK230030 | Oil save felt ×1 | |
| 14 | SJ250240 | Side cover(first head) dyhe ×1 | |
| 51 | M3x10 | Truss screw | |
| 52 | M3x6 | Truss screw (with plain washer) | |
| 55 | M4x16 | Truss screw | |
| 57 | M4x8 | Hex.socket set screw | |
| 59 | M8x25 | Hex.socket bolt | |
| 60 | M5x8 | Truss screw |
04b Needle Bar B35 parts · 3 in shop
| 23 | HT230340 | Cloth hold support rubber ×1 | $ 1.49 → |
| 24 | HT230290 | Needle bar beat fixing base ×1 | $ 28.09 → |
| 28 | RH230540 | Needle bar driver ×1 | $ 3.29 → |
| 1 | MH230140 | Slide shaft a'ssy(dt-zn) ×1 | |
| 2 | MH230180 | Oil core(210mm) ×1 | |
| 3 | MH230170 | Slide shaft(dt-zn) ×1 | |
| 4 | RD230150 | Driving shaft bush upper(bemax) ×1 | |
| 5 | HT230750 | Oil core(30mm) ×1 | |
| 6 | HT230471 | Small link pin ×1 | |
| 7 | HT230491C | Link(small) ×1 | |
| 8 | HT230730 | Shim ring( 10 t=0.3) ×2 | |
| 9 | RR230130 | Link roller joint pin ×1 | |
| 10 | RR230150 | Cloth hold roller ×1 | |
| 11 | RR230140 | Thrust washer ×1 | |
| 12 | HT230760 | Oil core(8mm) ×1 | |
| 13 | HB230201C | Needle bar driving link ×1 | |
| 14 | HT230510 | Needle bar driver slide block ×1 | |
| 15 | HT230770 | Oil core(20mm) ×1 | |
| 16 | HT230460 | Large link pin ×1 | |
| 17 | HT230480C | Link(large) ×1 | |
| 18 | HT230500 | Set slide block ×1 | |
| 19 | HP231370 | Square ball ×1 | |
| 20 | HT230320C | Square ball pin ×1 | |
| 21 | SG230000 | Oil receive plate ×1 | |
| 22 | RR230031C | Cloth hold support ×1 | |
| 25 | HT230520 | Needle bar driving stopper ×1 | |
| 26 | A9012368 | Spacer(roll bush) ×1 | |
| 27 | RH230550 | Shim ring ×1 | |
| 29 | HT230280C | Needle bar driver pin ×1 | |
| 30 | HT230560C | Needle bar driver return spring ×1 | |
| 31 | A9012415 | Double point screw m6×7(p0.75) ×1 | |
| 32 | SL230180 | Driving shaft bush (lower) ×1 | |
| 33 | LA230140 | Bearing guide ×1 | |
| 34 | SG230300C | Bearing pin ×1 | |
| 35 | A9010065 | Ball bearing 686zz ×1 |
Other Parts17 parts · 2 in shop
| 53 | M4x12 | Hex.socket bolt | $ 3.49 → |
| 56 | M3x8 | Flush screw | $ 35.99 → |
| 51 | M3x3 | Pan screw | |
| 51 | M6x10 | Truss screw | |
| 51 | M3x10 | Truss screw | |
| 52 | M3x6 | Truss screw | |
| 52 | M4x6 | Hex.socket bolt | |
| 52 | M3x18 | Hex.socket bolt | |
| 53 | M5x26 | Hex.socket bolt | |
| 54 | M4x8 | Hex.socket bolt | |
| 55 | M4x18 | Hex.socket bolt | |
| 55 | M4x16 | Truss screw | |
| 56 | M4x10 | Hex.socket bolt | |
| 57 | M3x5 | Hex.socket bolt | |
| 59 | M8x25 | Hex.socket bolt | |
| 60 | M5x6 | Hex.socket set screw | |
| 60 | M5x8 | Truss screw |
Contents4 parts · 1 in shop
| 04A-2 | Needle bar a (z15) | $ 39.09 → | |
| BEVT-Z1201CⅡ | Machine layout (bevt-z1201cⅡ) | ||
| BEVT-Z1501CⅡ | Machine layout (bevt-z1501cⅡ) | ||
| 04A-1 | Needle bar a (z12) |
Take Up Lever27 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 1 | MK230130 | Take up lever driving lever a'ssy ×1 | |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 5 | KF230501 | Take up lever roller a'ssy ×1 | |
| 6 | KF230680 | Cam followers $(kr\times4\times7.9\times15-1p\times1)$ ×1 | |
| 7 | HB230650 | Flush screw(with adhesion) ×1 | |
| 8 | MK230120 | Take up lever driving roller (erite pro.) ×1 | |
| 9 | RD230130C | Take up lever driving roller shaft ×1 | |
| 10 | HB230800 | Take up lever drive lever fixed pin set collar ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 15 | HB230080C | Washer for cam(2) ×1 | |
| 16 | HB230070C | Washer for cam(1) ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 18 | HB230620 | Flush screw ×3 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 | |
| 26 | A9010073 | Ball bearing(6005zz) ×1 | |
| 27 | A9012421 | C-ring for hole φ47 ×1 |
Needle Bar A(z12)25 parts · 1 in shop
| 2 | RD230490 | Needle bar guide ×12 | $ 12.09 → |
| 1 | RD230480 | Needle bar a'ssy ×12 | |
| 3 | RH230410C | Needle bar ×12 | |
| 4 | HT230251 | Needle bar spring(upper) ×12 | |
| 5 | HT230330 | Cloth hold set clamp ×12 | |
| 6 | HT230263 | Washer for set clamp ×12 | |
| 7 | A9014167 | O-ring ss065 ×24 | |
| 8 | SG230220 | Needle bar spring lower ×12 | |
| 9 | RD230370C | Cloth hold(zq4) ×12 | |
| 10 | KF232130 | O-ring(1b-as568-902) c03091b ×12 | |
| 11 | HT230120 | Washer 2.4 ×12 | |
| 12 | RH230440 | Needle clamp (with hook, set screw) ×12 | |
| 13 | RH230460 | Needle clamp screw ×12 | |
| 14 | RH230450 | Needle clamp (with hook) ×12 | |
| 15 | FN070011Q1 | Needle (dbxk5q1-ny11) ×12 | |
| 16 | SG230140 | Take up lever shaft(z12) ×1 | |
| 17 | MK230090 | Take up lever collar ×2 | |
| 18 | SG230360 | Slide block set ×1 | |
| 19 | SG230060 | Slide block ×1 | |
| 20 | SG230110 | Bearing plate ×1 | |
| 21 | SG230070 | Needle bar base ×1 | |
| 22 | MK230050 | Take up lever washer ×13 | |
| 23 | MK230040 | Take up lever ×12 | |
| 24 | SG230040 | Needle bar stocker ×1 | |
| 25 | SG230150 | Needle bar felt ×1 |
Needle Bar A (z15)26 parts · 1 in shop
| 13 | RD230490 | Needle bar guide ×15 | $ 12.09 → |
| 1 | SL230001 | Slide block set ×1 | |
| 2 | RD230060 | Bearing plate ×1 | |
| 3 | SL230021 | Slide block ×1 | |
| 4 | SL230090 | Slide block sim ×1 | |
| 5 | SL230031 | Needle bar base ×1 | |
| 6 | SL230070 | Take up lever shaft(zq6) ×1 | |
| 7 | MK230090 | Take up lever collar ×2 | |
| 8 | MK230050 | Take up lever washer ×16 | |
| 9 | MK230040 | Take up lever ×15 | |
| 10 | SL230040 | Needle bar stocker ×1 | |
| 11 | SL230080 | Needle bar felt ×1 | |
| 12 | RD230480 | Needle bar a'ssy ×15 | |
| 14 | RH230410C | Needle bar ×15 | |
| 15 | HT230251 | Needle bar spring(upper) ×15 | |
| 16 | HT230330 | Cloth hold set clamp ×15 | |
| 17 | HT230263 | Washer for set clamp ×15 | |
| 18 | A9014167 | O-ring ss065 ×30 | |
| 19 | SG230220 | Needle bar spring lower ×15 | |
| 20 | RD230370C | Cloth hold(zq4) ×15 | |
| 21 | KF232130 | O-ring(1b-as568-902) c03091b ×15 | |
| 22 | HT230120 | Washer 2.4 ×15 | |
| 23 | RH230440 | Needle clamp (with hook, set screw) ×15 | |
| 24 | RH230450 | Needle clamp (with hook) ×15 | |
| 25 | RH230460 | Needle clamp screw ×15 | |
| 26 | FN070011Q1 | Needle (dbxk5q1-ny11) ×15 |
06 Thread Guide27 parts · 1 in shop
| 19 | HT240290 | Tension wheel a'ssy ×15 | $ 36.49 → |
| 1 | PG240030 | Thread collar base a'ssy(vs-z15) ×1 | |
| 2 | RV240100 | Felt frame (dsh-zq) ×1 | |
| 3 | RV240110 | Felt(dsh-zq) ×1 | |
| 4 | PG240040 | Thread collar base(vs-z15) ×1 | |
| 5 | RV240180 | Tube holder(d-zq) ×1 | |
| 6 | A9012438 | Felt hold spacer (dsh-zq) ×2 | |
| 7 | MP240001 | Tension base a'ssy(vt-z15) ×1 | |
| 8 | EBY02612 | 8562 switch board with thread detection ×1 | |
| 9 | RR240660 | Led oil avoid rubber plate ×1 | |
| 10 | RR240330 | Switch board fixed base ×2 | |
| 11 | PG240020 | Tension base cover(vs-z15) ×1 | |
| 12 | A9068032 | Fcw clamp(fcw-26) ×1 | |
| 13 | HT240180 | Sm-nut ×15 | |
| 14 | HT240101 | Lower thread detection sensor disk(yn) ×15 | |
| 15 | KN540510 | Tension wheel nut ×15 | |
| 16 | FA999052 | Hex.nut sm11/64(with washers) ×15 | |
| 17 | PG240010 | Tension base case a'ssy (vs-z15) ×1 | |
| 18 | RR240300C | Tension a'ssy(ds) ×15 | |
| 20 | RR240510 | Thread spring adjusting plate ×15 | |
| 21 | RD240154 | Dial tension a'ssy(ds) ×15 | |
| 22 | RV240040 | Thread guide plate upper(dsh-zq) ×1 | |
| 23 | RV240050 | Thread guide plate lower(dsh-zq) ×1 | |
| 24 | RV240091 | Sponge rubber(dsh-zq) ×1 | |
| 25 | RV240062 | Second thread guide plate(dsh-zq) ×1 | |
| 26 | RV240081 | Tension base bracket l(dsh-zq) ×1 | |
| 27 | RV240071 | Tension base bracket r(dsh-zq) ×1 |
05 Jump9 parts · 1 in shop
| 7 | HT230220 | Needle bar stopper ×1 | $ 6.29 → |
| 1 | A9056039 | Rotary solenoid ×1 | |
| 2 | RD230250 | Jump solenoid fixing bracket ×1 | |
| 3 | HB240041 | Jump eccentric ×2 | |
| 4 | HB240020C | Jump solenoid lever ×1 | |
| 5 | HB240030C | Jump solenoid lever pin ×1 | |
| 6 | SG230260 | Needle bar stopper fixing bracket ×1 | |
| 8 | HT230620C | Needle bar stopper fixing pin ×1 | |
| 9 | MH230161C | Indication plate ×1 |
0316 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 9 | RD2301300 | Take up lever driving roller shaft ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 |
04a-216 parts · 1 in shop
| 13 | RD230490 | Needle bar guide ×15 | $ 12.09 → |
| 1 | SL230001 | Slide block set ×1 | |
| 2 | RD230060 | Bearing plate ×1 | |
| 3 | SL230021 | Slide block ×1 | |
| 4 | SL230090 | Slide block sim ×1 | |
| 5 | SL230031 | Needle bar base ×1 | |
| 6 | SL230070 | Take up lever shaft(zq6) ×1 | |
| 10 | SL230040 | Slide block sim ×1 | |
| 11 | SL230080 | Needle bar felt ×1 | |
| 12 | RD230480 | Needle bar a'ssy ×15 | |
| 14 | RH230410C | Needle bar ×15 | |
| 19 | SG230220 | Needle bar spring lower ×15 | |
| 20 | RD230370C | Cloth hold(zq4) ×15 | |
| 23 | RH230440 | Needle clamp (with hook, set screw) ×15 | |
| 24 | RH230450 | Needle clamp (with hook) ×15 | |
| 25 | RH230460 | Needle clamp screw ×15 |
10g Pantograph Drive G38 parts · 1 in shop
| 51 | M4×25 | Hex.bolt | $ 72.09 → |
| 1 | A9012052 | E-ring(φ10) ×1 | |
| 2 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 3 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 4 | HH481991C | Timing pulley shaft ×1 | |
| 5 | SJ480090 | V-pulley bracket ×1 | |
| 6 | MM480141 | V-sensor plate(vt) ×1 | |
| 7 | MS480170 | V-guide base plate (vt-01c ii) ×1 | |
| 8 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 9 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 10 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×2 | |
| 11 | SC480230 | V-slide block plate ×1 | |
| 12 | MM480160 | V-slide block r(dthe) ×1 | |
| 13 | A9010114 | Bearing(60/22zz) ×2 | |
| 14 | A9012447 | Stop ring s-22 ×2 | |
| 15 | MS480180 | Ball spline iko+pulley (s3m, p26) ×1 | |
| 16 | MM480170 | V-slide block l(dthe) ×1 | |
| 17 | MM480071 | H-sensor plate(vt-c) ×1 | |
| 18 | EDY00270 | Photointerrupter(gp1a75e) ×2 | |
| 19 | EP530241 | V-sensor cable(vt) ×1 | |
| 20 | MM480131 | V-sensor bracket(vt) ×1 | |
| 51 | Hex.bolt M4×25 | Hex.bolt m4×25 | |
| 52 | M5×15(Black) | Hex.socket bolt | |
| 52 | Hex.socket bolt M5×15(Black) | Hex.socket bolt m5×15(black) | |
| 53 | Hex.nut M8 | Hex.nut m8 | |
| 54 | Flush screw M3×6 | Flush screw m3×6 | |
| 55 | M3×14 | Flush screw | |
| 55 | Flush screw M3×14 | Flush screw m3×14 | |
| 56 | Flush screw M4×6 | Flush screw m4×6 | |
| 57 | Truss screw M4× | Truss screw m4× ×8 | |
| 58 | Truss screw M3×4 | Truss screw m3×4 | |
| 59 | Truss screw M3×8 | Truss screw m3×8 | |
| 60 | M4×14 | Truss screw | |
| 60 | Truss screw M4×14 | Truss screw m4×14 | |
| 61 | M4×10 | Hex.socket bolt | |
| 61 | Hex.socket bolt M4×10 | Hex.socket bolt m4×10 | |
| 62 | M4×12 | Hex.socket bolt | |
| 62 | Hex.socket bolt M4×12 | Hex.socket bolt m4×12 |
04 B Needle Bar B8 parts · 1 in shop
| 24 | HT230290 | Needle bar beat fixing base ×1 | $ 28.09 → |
| 1 | MH230140 | Slide shaft a'ssy(dt-zn) ×1 | |
| 2 | MH230180 | Oil core(210mm) ×1 | |
| 3 | MH230170 | Slide shaft(dt-zn) ×1 | |
| 19 | HP231370 | Square ball ×1 | |
| 20 | HT230320C | Square ball pin ×1 | |
| 29 | HT230280C | Needle bar driver pin ×1 | |
| 33 | LA230140 | Bearing guide ×1 |
03 Take Up Lever27 parts · 1 in shop
| 21 | RH230271 | Needle bearing ×1 | $ 5.49 → |
| 1 | MK230130 | Take up lever driving lever a'ssy ×1 | |
| 2 | RH230801 | Take up lever driving lever(metal) ×1 | |
| 3 | RH230311 | Take up lever driving lever ×1 | |
| 4 | RH230810 | Take up lever metal ×1 | |
| 5 | KF230501 | Take up lever roller a'ssy ×1 | |
| 6 | KF230680 | Cam followers $(kr\times4\times7.9\times15-1p\times1)$ ×1 | |
| 7 | HB230650 | Flush screw(with adhesion) ×1 | |
| 8 | MK230120 | Take up lever driving roller (erite pro.) ×1 | |
| 9 | RD230130C | Take up lever driving roller shaft ×1 | |
| 10 | HB230800 | Take up lever drive lever fixed pin set collar ×1 | |
| 11 | RH230610 | Thrust washer ×1 | |
| 12 | RH230330C | Needle bar driving cam set collar ×1 | |
| 13 | RH230320 | Take up lever driving lever fixing pin ×1 | |
| 14 | RR230250 | Take up lever needle bar drive a'ssy ×1 | |
| 15 | HB230080C | Washer for cam(2) ×1 | |
| 16 | HB230070C | Washer for cam(1) ×1 | |
| 17 | RR230240 | Take up lever cam h6s(420) ×1 | |
| 18 | HB230620 | Flush screw ×3 | |
| 19 | RH230300C | Take up lever cam base ×1 | |
| 20 | RH230280 | Needle bar crank rod ×1 | |
| 22 | RN230010 | Needle bar driving cam a'ssy ×1 | |
| 23 | RN230020C1 | Needle bar driving cam (eccentric 9.2 420) ×1 | |
| 24 | RN230030 | Bearing case a'ssy ×1 | |
| 25 | RN230040 | Bearing case ×1 | |
| 26 | A9010073 | Ball bearing(6005zz) ×1 | |
| 27 | A9012421 | C-ring for hole φ47 ×1 |
06-1 Thread Guide (z12)22 parts · 1 in shop
| 6 | HT240290 | Tension wheel a'ssy ×12 | $ 36.49 → |
| 1 | MS240010 | Tension base a'ssy (vt-z1201c ii) ×1 | |
| 2 | PN240010 | Tension base cover(vy-z12) ×1 | |
| 3 | A9068032 | Fcw clamp(fcw-26) ×1 | |
| 4 | SG240040 | Upper part thread guide plate(dsh-z12) ×1 | |
| 5 | RR240300C | Tension a'ssy(ds) ×12 | |
| 7 | RR240510 | Thread spring adjusting plate ×12 | |
| 8 | RD240154 | Dial tension a'ssy ×12 | |
| 9 | PF240010 | Tension base case a'ssy (vs-z12) ×1 | |
| 10 | SG240050 | Thread guide plate upper(dsh-z12) ×1 | |
| 11 | SG240060 | Thread guide plate lower(dsh-z12) ×1 | |
| 12 | SG240110 | Sponge rubber(dsh-z12) ×1 | |
| 13 | SG240070 | Second thread guide plate lower(dsh-z12) ×1 | |
| 14 | FA999052 | Hex.nut sm11/64(with washers) ×12 | |
| 15 | KN540510 | Tension wheel nut ×12 | |
| 16 | HT240101 | Lower thread detection sensor disk(yn) ×12 | |
| 17 | HT240180 | Sm-nut ×12 | |
| 18 | EBY02600 | 8580 switch board with thread detection ×1 | |
| 19 | RR240660 | Led oil avoid rubber plate ×1 | |
| 20 | RR240330 | Switch board fixed base(ds) ×2 | |
| 21 | SG240100 | Tension base bracket l(dsh-z12) ×1 | |
| 22 | SG240090 | Tension base bracket r(dsh-z12) ×1 |
02 A Thread Cut A29 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position bracket ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) barrel frame correspondence ×1 | |
| 3 | SJ270020 | Cylinder throat plate barrel frame correspondence ×1 | |
| 4 | HT270182 | Lower thread support stay(cylinder) cmp ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener (for cylinder) ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 |
04b10 parts · 1 in shop
| 28 | RH230540 | Needle bar driver ×1 | $ 3.29 → |
| 4 | RD230150 | Driving shaft bush upper(bemax) ×1 | |
| 9 | RR230130 | Link roller joint pin ×1 | |
| 10 | RR230150 | Cloth hold roller ×1 | |
| 11 | RR230140 | Thrust washer ×1 | |
| 21 | SG230000 | Oil receive plate ×1 | |
| 22 | RR230031C | Cloth hold support ×1 | |
| 27 | RH230550 | Shim ring ×1 | |
| 32 | SL230180 | Driving shaft bush (lower) ×1 | |
| 34 | SG230300C | Bearing pin ×1 |
04a-115 parts · 1 in shop
| 2 | RD230490 | Needle bar guide ×12 | $ 12.09 → |
| 1 | RD230480 | Needle bar a'ssy ×12 | |
| 3 | RH230410C | Needle bar ×12 | |
| 8 | SG230220 | Needle bar spring lower ×12 | |
| 9 | RD230370C | Cloth hold(zq4) ×12 | |
| 12 | RH230440 | Needle clamp (with hook, set screw) ×12 | |
| 13 | RH230460 | Needle clamp screw ×12 | |
| 14 | RH230450 | Needle clamp (with hook) ×12 | |
| 16 | SG230140 | Take up lever shaft(z12) ×1 | |
| 18 | SG230360 | Slide block set ×1 | |
| 19 | SG230060 | Slide block ×1 | |
| 20 | SG230110 | Bearing plate ×1 | |
| 21 | SG230070 | Needle bar base ×1 | |
| 24 | SG230040 | Needle bar stocker ×1 | |
| 25 | SG230150 | Needle bar felt ×1 |
02b Thread Cut B14 parts · 1 in shop
| 56 | M3x8 | Flush screw | $ 35.99 → |
| 1 | MM270060 | Thread cutter drive cover(dthe) ×1 | |
| 2 | A9052078 | Micro switch(d2vw-01l2a-1) ×1 | |
| 3 | A9012001 | Uniball joint(rd4020r) ×1 | |
| 4 | MM270040 | Thread cutter lever connecting rod(dthe) ×1 | |
| 5 | HP482260 | H-support roller fixed collar ×1 | |
| 6 | MM270030 | Thread cutter drive cam(dthe) ×1 | |
| 7 | MM270020 | Thread cutter motor bracket(dthe) ×1 | |
| 8 | MM270050 | Switch hold plate(dthe) ×1 | |
| 9 | EDY00600 | Thread cut motor (ts3617n473e24) ×1 | |
| 51 | M6x10 | Truss screw | |
| 52 | M3x18 | Hex.socket bolt (with washers) | |
| 53 | M5x26 | Hex.socket bolt (with washers) | |
| 55 | M4x6 | Hex.socket bolt |
02a Thread Cut A36 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 4 | HT270182 | Lower thread support stay( ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 | |
| 51 | M3x3 | Pan screw | |
| 52 | M4x6 | Hex.socket bolt | |
| 54 | M4x8 | Hex.socket bolt (with plain washer) | |
| 55 | M4x18 | Hex.socket bolt | |
| 56 | M4x10 | Hex.socket bolt | |
| 57 | M3x5 | Hex.socket bolt | |
| 60 | M5x6 | Hex.socket set screw |
01b Head Bed B9 parts · 1 in shop
| 53 | M4x12 | Hex.socket bolt | $ 3.49 → |
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 | |
| 51 | M4x8 | Hex.socket set screw | |
| 52 | M6x15 | Hex.socket bolt | |
| 54 | M5x5 | Hex.socket set screw |
Thread Cut A29 parts · 1 in shop
| 21 | KX270000 | Rotating hook bobbin case holder position ×1 | $ 25.49 → |
| 1 | KX250081 | Throat plate set screw(hex.socket depth 2.2) ×2 | |
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 4 | HT270182 | Lower thread support stay(cylinder) cmp ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 7 | KX270010 | Fixed knife set screw ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 9 | A9013066 | Wave washer(ww5)(sk) ×1 | |
| 10 | KN272010 | Lower thread knife rotary shaft ×1 | |
| 11 | HS210111 | Lower thread knife drive rod a ×1 | |
| 12 | HS210121 | Lower thread knife drive rod b ×1 | |
| 13 | HS210100 | Lower thread knife drive lever upper ×1 | |
| 14 | A9056040 | Rotary solenoid 3er25-30x3x8x9(24v) ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 | |
| 15 | HS210060 | Solenoid stay(for middle bobbin) ×1 | |
| 16 | KN272401 | Stopper eccentric ×2 | |
| 17 | KC271940C | Soleroid lever a ×1 | |
| 18 | HS210080 | Connecting clamp ×1 | |
| 19 | A9011284 | Du bush with flange (k5f0606-12) ×2 | |
| 20 | KX270430 | Screw(cylinder) ×1 | |
| 22 | HS210051 | Hook fixed stay(short type) ×1 | |
| 23 | HS210300 | Hook(cylinder mk5) ×1 | |
| 24 | KC271001 | Upper thread knife rotary shaft ×1 | |
| 25 | HS210070 | Hook drive rod ×1 | |
| 26 | HS210090 | Knife lever rotary shaft ×1 | |
| 27 | KN271560C | Knife lever ×1 | |
| 28 | HM270000 | Connecting bar clamp ×1 |
01b1 parts
| 4 | SC250080 | Encoder safety cover ×1 |
04d14 parts
| 1 | MS230010 | Arm reinforcement bracket(vt-01c ii) ×1 | |
| 2 | MR230010 | Cap cover fixing plate ×1 | |
| 3 | RV230180 | Take up lever stocker ×1 | |
| 3 | SG230410 | Take up lever stocker(z12) ×1 | |
| 4 | MR230070 | Slide block fixed bracket(vt-cb ii only) ×1 | |
| 5 | SG230390 | Lmガイド(z12) ×1 | |
| 5 | SL230140 | Lmガイド (206) ×1 | |
| 6 | MS230030 | Cap cover set(vt-01c ii) ×1 set | |
| 7 | SG250060 | Oil holder felt ×1 | |
| 8 | MS230020 | Cap cover(vt-01c ii) ×1 | |
| 10 | RD270040 | Thread guard disk bracket upper ×1 | |
| 11 | RD270020 | Napped plate ×2 | |
| 11 | SG270100 | Napped plate ×2 | |
| 11 | SJ270100 | Napped plate ×2 |
02c6 parts
| 4 | SG270081 | Thread away base ×1 | |
| 4 | SJ270081 | Thread away base ×1 | |
| 11 | SG270090 | Thread away solenoid lever ×1 | |
| 11 | SJ270090 | Thread away solenoid lever ×1 | |
| 12 | MR230020 | Arm(vt-cs) ×1 | |
| 14 | SJ250240 | Side cover(first head) dyhe ×1 |
0816 parts
| 1 | MS310040 | Bearing case(main shaft) vt-01c ii ×1 | |
| 4 | MR310052 | Main shaft motor drive pulley (s3m,p=16) ×1 | |
| 5 | MS310030 | Main shaft motor fixed base(vt-01c ii) ×1 | |
| 9 | RQ310000 | Idler ×1 | |
| 11 | SC310021 | Idler shaft ×1 | |
| 12 | SC310030 | Idler bracket ×1 | |
| 13 | MR480230 | H-shaft motor timing pulley ×1 | |
| 14 | SC310062 | Lower shaft housing ×1 | |
| 15 | MS310020 | Lower shaft 15×776l (vt-01c ii) ×1 | |
| 16 | SC310150 | Tension bracket ×1 | |
| 18 | MS310060 | Rotary angle label(vt-01c ii) ×1 | |
| 19 | MS310010 | Upper shaft pulley (s3m, p60) vt-01c ii ×1 | |
| 20 | SC310071 | Upper shaft housing ×1 | |
| 21 | SG310090 | Upper shaft 420×740l(01c) ×1 | |
| 21 | SJ310090 | Upper shaft 420×740l(01c) ×1 | |
| 22 | MS310050 | Pulley box(vt-01cii) ×1 |
10c17 parts
| 1 | MS250020 | V-spline cover(vt-01c ii) ×1 | |
| 3 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 5 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 6 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 7 | SC250040 | H-rail frout cover ×1 | |
| 8 | SC250070 | H-rail side cover ×2 | |
| 9 | SC480040 | Lm guide(540l) ×1 | |
| 10 | RP480201 | Pulley stopper ×1 | |
| 12 | MR480180 | H-shaft drive pulley ×1 | |
| 13 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 14 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 16 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 17 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 18 | SJ480081 | Pulley bracket ×1 | |
| 20 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 25 | MS480010 | Guide base(r) vt-01c ii ×1 |
10d17 parts
| 1 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 4 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 5 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 6 | SC250040 | H-rail frout cover ×1 | |
| 7 | SC250070 | H-rail side cover ×2 | |
| 8 | SC480040 | L.m guide(540l) ×1 | |
| 9 | RP480201 | Pulley stopper ×1 | |
| 11 | MR480180 | H-shaft drive pulley ×1 | |
| 12 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 13 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 14 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 16 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 17 | SJ480081 | Pulley bracket ×1 | |
| 19 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 21 | MS480020 | Guide base(l) vt-01c ii ×1 | |
| 22 | SC480090 | Guide stay(l) ×1 |
10b3 parts
| 2 | SC730092 | Product pantograph stay a'ssy ×2 | |
| 7 | SC730102 | Stay bracket for compact machine ×2 | |
| 8 | SC730111 | Spacer ×2 |
10e7 parts
| 1 | MS480120 | Bearing support plate (h-shaft) vt-01c ii ×1 | |
| 2 | MS480130 | Hex.stay, 30l(h-shaft) vt-01ci ×4 | |
| 4 | MS480080 | H-pantograph drive shaft(1260l) vt-01c ii ×1 | |
| 5 | MR480230 | H-shaft motor timing pulley ×1 | |
| 7 | MS480090 | Pantograph drive motor pulley(s3m,p15) ×1 | |
| 8 | MS480110 | H-shaft motor fixed plate (vt-01c ii) ×1 | |
| 10 | MS480100 | H-shaft motor bracket(vt-01c i) ×1 |
04c9 parts
| 2 | RR230091 | Needle bar driving lever set(p25.65) ×1 | |
| 4 | RR230081 | Needle bar driving lever(p25.65) ×1 | |
| 13 | SG270050 | Thread support base ×1 | |
| 13 | SJ270050 | Thread support base ×1 | |
| 15 | SG270060 | Thread support lever ×1 | |
| 15 | SJ270060 | Thread support lever ×1 | |
| 16 | SG270070 | Thread support link ×1 | |
| 16 | SJ270070 | Thread support link ×1 | |
| 22 | MR510010 | Laser marker set(dot, cb ii) ×1 set |
06-115 parts
| 1 | MS240010 | Tension base a'ssy (vt-z1201c ii) ×1 | |
| 2 | PN240010 | Tension base cover(vy-z12) ×1 | |
| 4 | SG240040 | Upper part thread guide plate(dsh-z12) ×1 | |
| 5 | RR240300C | Tension a'ssy(ds) ×12 | |
| 7 | RR240510 | Thread spring adjusting plate ×12 | |
| 8 | RD240154 | Dial tension a'ssy ×12 | |
| 9 | PF240010 | Tension base case a'ssy (vs-z12) ×1 | |
| 10 | SG240050 | Thread guide plate upper(dsh-z12) ×1 | |
| 11 | SG240060 | Thread guide plate lower(dsh-z12) ×1 | |
| 12 | SG240110 | Sponge rubber(dsh-z12) ×1 | |
| 13 | SG240070 | Second thread guide plate lower(dsh-z12) ×1 | |
| 19 | RR240660 | Led oil avoid rubber plate ×1 | |
| 20 | RR240330 | Switch board fixed base(ds) ×2 | |
| 21 | SG240100 | Tension base bracket l(dsh-z12) ×1 | |
| 22 | SG240090 | Tension base bracket r(dsh-z12) ×1 |
00a12 parts
| 2 | SJ140120C | Table stand (dyhe) ×1 | |
| 3 | SJ140131 | Table stand bracket(dyhe-c) ×1 | |
| 4 | MS140010 | Table stand bracket 01c ii ×1 | |
| 5 | SJ140220 | Table stand fixed knob bolt ×1 | |
| 8 | MS110000 | Frame bevt-z1201c ii 450×520/520 ×1 | |
| 8 | MS160000 | Frame bevt-z1501c ii 450×520/520 ×1 | |
| 9 | SC140120 | Table stopper ×4 | |
| 10 | SJ140050 | Oil store(l) dyhe p=520 ×1 | |
| 11 | SJ140040 | Oil store(r) dyhe p=520 ×1 | |
| 14 | SC160031 | Mount base a'ssy (compact machine) ×4 | |
| 15 | SC160011 | Mount base(compact machine) ×4 | |
| 16 | SC160020 | Vibroisolating pad(compact machine) ×4 |
00b11 parts
| 2 | MS120000 | Table (servo machine) bevt-01c ii 450×520/52 ×1 | |
| 4 | SJ140250 | Table set bracket a'ssy (compact machine) ×2 set | |
| 5 | SJ140230 | Clamp plate holder ×2 | |
| 7 | SJ140240 | Clamp plate ×2 | |
| 9 | SC140140 | Table support(l=200) ×4 | |
| 10 | SC140090 | Table support angle ×1 | |
| 11 | SC210010 | Adjust nut m10 ×16 | |
| 13 | SJ140010 | Lh-table support bracket(dyhe) ×1 | |
| 14 | SC140030 | Lh-table support ×1 | |
| 15 | SC140020 | Rh-table support ×1 | |
| 16 | SJ140000 | Rh-table support bracket(dyhe) ×1 |
01a8 parts
| 6 | SJ220010 | Lower shaft gear(small gear, korean) ×1 | |
| 10 | SJ210120 | Cylinder bed cover, correspond barrel frame ×1 | |
| 12 | SJ320010 | Lower shaft gear(large gear, korean) ×1 | |
| 15 | SC210000 | Adjust bolt ×4 | |
| 16 | SC210010 | Adjust nut m10 ×8 | |
| 17 | SJ210090 | Bsrrel bed(small bobbin) ×1 | |
| 17 | SJ210150 | Bsrrel bed r-type(middle bobbin) ×1 | |
| 18 | SJ210080 | Throat plate base, correspond barrel frame ×1 |
073 parts
| 1 | MS330010 | Color change cover(vt-01c ii) ×1 | |
| 4 | MS330030 | Color change motor bracket(dthe) ×1 | |
| 9 | MS330020 | Color change base (dthe) ×1 |
10h10 parts
| 1 | MS480240 | Bearing case(v-shaft) vt-01c ii ×1 | |
| 4 | MS480090 | Pantograph drive motor pulley (s3m,p15) ×1 | |
| 5 | MS480230 | V-shaft motor fixed plate (vt-01c ii) ×1 | |
| 7 | MS480220 | V-shaft motor bracket(vt-01c ii) ×1 | |
| 8 | MS480210 | V-shaft motor base(vt-01c ii) ×1 | |
| 10 | MS480200 | V-shaft motor timing pulley (s3m,p60) ×1 | |
| 11 | MS480190 | Clamp(spline shaft) vt-01c ii ×2 | |
| 13 | SC480070 | H-rail side cover ×2 | |
| 16 | MS480260 | Pantograph drive pulley cover(vt-01c ii) ×1 | |
| 17 | MS480251 | Pantograph pulley rear cover(vt-01c ii) ×1 |
10f7 parts
| 2 | SC481120 | V-guide cover stad a ×4 | |
| 3 | SC481130 | V-guide cover stad b ×2 | |
| 4 | MS480160 | V-slide bracket(01c ii) st=520 ×1 | |
| 6 | MS480140 | V-guide pantograph frame a'ssy (vt-01c ii) st ×1 set | |
| 7 | SJ480120 | Lm guide(l=1000) ×1 | |
| 8 | MS480150 | V-guide pantograph frame (vt-01c ii) st=520 ×1 | |
| 9 | SC480830 | V-guide felt(l=155) ×3 |
11b2 parts
| 7 | MS510010 | Driver board base (vt-01c ii) ×1 | |
| 9 | MS510020 | Connecter joint panel (vt-01c ii) ×1 |
04e12 parts
| 1 | RV250070 | Arm upper cover ×1 | |
| 2 | PF250001 | Head cover(z12) ×1 | |
| 2 | PG250001 | Head cover(z15) ×1 | |
| 3 | RD240271 | Thread guard(with guide) ×1 | |
| 3 | SG240000 | Thread guard(with guide) ×1 | |
| 5 | SL270000 | Thread support apron a'ssy ×1 set | |
| 6 | SG270010 | Thread support apron ×1 | |
| 6 | SL270010 | Thread support apron ×1 | |
| 8 | SG270000 | Thread support clamp ×12 | |
| 11 | SL270030 | Thread holder spring support ×1 | |
| 12 | SL270040 | Thread holder spring fixed screw ×3 | |
| 13 | SL270020 | Thread holder spring ×1 |
10a4 parts
| 4 | SC730041 | Pantograph fixing plate ×2 | |
| 5 | SC730031 | Pantograph fixed spacer b ×2 | |
| 6 | MM730000 | Pantograph frame (for c01,450×520) ×1 | |
| 7 | MM730010 | Pantograph a'ssy (c01,450×520) ×1 |
052 parts
| 2 | RD230250 | Jump solenoid fixing bracket ×1 | |
| 6 | SG230260 | Needle bar stopper fixing bracket ×1 |
06-219 parts
| 1 | PG240030 | Thread collar base a'ssy(vs-z15) ×1 | |
| 2 | RV240100 | Felt frame (dsh-zq) ×1 | |
| 3 | RV240110 | Felt(dsh-zq) ×1 | |
| 4 | PG240040 | Thread collar base(vs-z15) ×1 | |
| 5 | RV240180 | Tube holder(d-zq) ×1 | |
| 7 | MP240001 | Tension base a'ssy(vt-z15) ×1 | |
| 9 | RR240660 | Led oil avoid rubber plate ×1 | |
| 10 | RR240330 | Switch board fixed base ×2 | |
| 11 | PG240020 | Tension base cover(vs-z15) ×1 | |
| 17 | PG240010 | Tension base case a'ssy (vs-z15) ×1 | |
| 18 | RR240300C | Tension a'ssy(ds) ×15 | |
| 20 | RR240510 | Thread spring adjusting plate ×15 | |
| 21 | RD240154 | Dial tension a'ssy(ds) ×15 | |
| 22 | RV240040 | Thread guide plate upper(dsh-zq) ×1 | |
| 23 | RV240050 | Thread guide plate lower(dsh-zq) ×1 | |
| 24 | RV240091 | Sponge rubber(dsh-zq) ×1 | |
| 25 | RV240062 | Second thread guide plate(dsh-zq) ×1 | |
| 26 | RV240081 | Tension base bracket l(dsh-zq) ×1 | |
| 27 | RV240071 | Tension base bracket r(dsh-zq) ×1 |
11b Control B15 parts
| 1 | MM250010 | Bridge cover(dthe) ×2 | |
| 2 | MM250030 | Frame cover(dthe) ×2 | |
| 3 | MM250050 | Work mindow cover ×1 | |
| 4 | EDY00440 | Cooling fan (vt servo) ×1 | |
| 5 | EDY00610 | Vt-01cⅡ servo ac driver set ×1 | |
| 6 | A9068052 | Locking guard spacer kgls-6rt ×5 | |
| 7 | MS510010 | Driver board base (vt-01cⅡ) ×1 | |
| 8 | EAY03230 | 11010 driver board(vt-servo) ×1 | |
| 9 | MS510020 | Connecter joint panel (vt-01cⅡ) ×1 | |
| 51 | Truss screw M6x10 | Truss screw m6x10 | |
| 52 | Truss screw M5x10 | Truss screw m5x10 | |
| 53 | Truss screw M4x6 | Truss screw m4x6 | |
| 54 | Truss screw M4x38 | Truss screw m4x38 | |
| 55 | Hex.nut M4(With washers) | Hex.nut m4(with washers) | |
| 56 | Hex.socket bolt M5x8(With washers) | Hex.socket bolt m5x8(with washers) |
12-12 parts
| 1 | MM710010 | Spool holder a'ssy(z1201c) ×1 | |
| 6 | SK710000 | Spool holder base block ×2 |
10c Pantograph Drive C40 parts
| 1 | MS250020 | V-spline cover(vt-01c ii) ×1 | |
| 2 | A9068152 | Super seal(nw-7s-p) ×1 | |
| 3 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 4 | A9011243 | Bearing unit(ufl002c) ×2 | |
| 5 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 6 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 7 | SC250040 | H-rail frout cover ×1 | |
| 8 | SC250070 | H-rail side cover ×2 | |
| 9 | SC480040 | Lm guide(540l) ×1 | |
| 10 | RP480201 | Pulley stopper ×1 | |
| 11 | HH481980 | 019 clamp ×1 | |
| 12 | MR480180 | H-shaft drive pulley ×1 | |
| 13 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 14 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 16 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 17 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 18 | SJ480081 | Pulley bracket ×1 | |
| 19 | HH481991C | Timing pulley shaft ×1 | |
| 20 | MS480070 | Pantograph drive pulley (front) ma3-32t ×1 | |
| 21 | A9012052 | E-ring(φ10) ×1 | |
| 22 | MM480050 | Guide stay(dthe) ×1 | |
| 23 | A9068153 | Super seal(nw-7s) ×1 | |
| 24 | A9068151 | Curl cord(compact machine) vy-c ×1 | |
| 25 | MS480010 | Guide base(r) vt-01c ii ×1 | |
| 51 | Hex.socket flange bolt M6×10 | Hex.socket flange bolt m6×10 | |
| 52 | Hex.socket bolt M5×15 (Chromate) | Hex.socket bolt m5×15 (chromate) | |
| 53 | Hex.socket bolt M6×20 (Chromate) | Hex.socket bolt m6×20 (chromate) | |
| 54 | Truss screw M4×6(Chromate) | Truss screw m4×6(chromate) | |
| 55 | Hex.socket bolt M4×10(Black) | Hex.socket bolt m4×10(black) | |
| 56 | Hex.socket bolt M4×12(With spring washer) | Hex.socket bolt m4×12(with spring washer) | |
| 57 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 58 | Hex.cap nut M8(Chromate) | Hex.cap nut m8(chromate) | |
| 59 | Hex.bolt M4×30(Chromate) | Hex.bolt m4×30(chromate) | |
| 60 | Hex.nut M4 | Hex.nut m4 | |
| 61 | Hex.bolt M4×40(Chromate) | Hex.bolt m4×40(chromate) | |
| 62 | Hex.socket bolt M4×12(With adhesion) | Hex.socket bolt m4×12(with adhesion) | |
| 63 | Flange nut M4 | Flange nut m4 | |
| 64 | Hex.socket bolt M3×12 (Black) | Hex.socket bolt m3×12 (black) | |
| 65 | Hex.socket bolt M3×15(Black) | Hex.socket bolt m3×15(black) |
04c Needle Bar C28 parts
| 1 | HT230590 | Lever pin block ×1 | |
| 2 | RR230091 | Needle bar driving lever set(p25.65) ×1 | |
| 3 | HB230271C | Needle bar driving lever fixing pin set collar ×1 | |
| 4 | RR230081 | Needle bar driving lever(p25.65) ×1 | |
| 5 | HB230281C | Needle bar driving lever fixing pin collar ×1 | |
| 6 | HT230410C | Needle bar driving lever fixing pin ×1 | |
| 7 | HB230262C | Needle bar driving lever connecting pin ×1 | |
| 8 | HB230220C | Needle bar driving lever pin(b) ×1 | |
| 9 | HT230420C | Guide plate ×1 | |
| 10 | MK230071 | K2 cam(012) ×1 | |
| 11 | MK230080C | Cam tap plate ×1 | |
| 12 | MM270000 | Thread support a'ssy(24v) dthe-zq ×1 set | |
| 13 | SG270050 | Thread support base ×1 | |
| 14 | A9014166 | Plug cushion rubber tm-96-6 ×1 | |
| 15 | SG270060 | Thread support lever ×1 | |
| 16 | SG270070 | Thread support link ×1 | |
| 17 | A9012127 | E-ring(43) ×2 | |
| 18 | SG270120 | Thread support return spring ×1 | |
| 19 | SG270110 | Thread support lever pin screw ×1 | |
| 20 | A9056042 | Keep solenoid(24v) tds-k10sl368- ×1 | |
| 21 | KC270101C | Solenoid pin ×1 | |
| 22 | MR510010 | Laser marker set(dot, cb ii) ×1 set | |
| 23 | EP535090 | Laser marker a'ssy(dot, cb ii) ×1 set | |
| 24 | MK510050 | Laser marker(lm-6501rc) ×1 | |
| 25 | A9014167 | O-ring(ss065) ×1 | |
| 26 | MK510100 | Laser marker support clip ×1 | |
| 27 | MK510061 | Laser marker fixing bracket ×1 | |
| 28 | A9068146 | Aluminum alloy cable clip(al2, misumi) ×1 |
04d Needle Bar D18 parts
| 1 | MS230010 | Arm reinforcement bracket(vt-01c ii) ×1 | |
| 2 | MR230010 | Cap cover fixing plate ×1 | |
| 3 | SG230410 | Take up lever stocker(z12) ×1 | |
| 3 | RV230180 | Take up lever stocker ×1 | |
| 4 | MR230070 | Slide block fixed bracket(vt-cb ii only) ×1 | |
| 5 | SG230390 | Lmガイド(z12) ×1 | |
| 5 | SL230140 | Lmガイド (zq6) ×1 | |
| 6 | MS230030 | Cap cover set(vt-01c ii) ×1 set | |
| 7 | SG250060 | Oil holder felt ×1 | |
| 8 | MS230020 | Cap cover(vt-01c ii) ×1 | |
| 9 | A9014168 | Rivet 42×11.5(brass) ×4 | |
| 10 | SG270040 | Thread guard disk bracket upper ×1 | |
| 10 | RD270040 | Thread guard disk bracket upper ×1 | |
| 11 | SG270100 | Napped plate ×2 | |
| 11 | RD270020 | Napped plate ×2 | |
| 12 | SG270030 | Thread guard disk bracket(z12) ×1 | |
| 12 | LA270080 | Thread guard disk bracket(zq-a) ×1 | |
| 13 | KX270070 | Thread guard disk spacer ×2 |
00b Table Frame B21 parts
| 1 | MM120010 | Encoder service cover (dthe) ×1 | |
| 2 | MS120000 | Table (servo machine) bevt-01c ii 450×520/52 ×1 | |
| 3 | HM140120 | Table stopper(front) ×4 | |
| 4 | SJ140250 | Table set bracket a'ssy (compact machine) ×2 set | |
| 5 | SJ140230 | Clamp plate holder ×2 | |
| 6 | A9014198 | Rubber foot(tk-16) ×2 | |
| 7 | SJ140240 | Clamp plate ×2 | |
| 8 | A9012493 | Wing nut m8(i) ×2 | |
| 9 | SC140140 | Table support(l=200) ×4 | |
| 10 | SC140090 | Table support angle ×1 | |
| 11 | SC210010 | Adjust nut m10 ×16 | |
| 12 | MM140001 | R-side stand table support(vt) ×1 | |
| 13 | SJ140010 | Lh-table support bracket(dyhe) ×1 | |
| 14 | SC140030 | Lh-table support ×1 | |
| 15 | SC140020 | Rh-table support ×1 | |
| 16 | SJ140000 | Rh-table support bracket(dyhe) ×1 | |
| 51 | M4x8 | Flush screw(under cut) | |
| 53 | M5x19 | Pierce screw | |
| 54 | M3x10 | Hex.socket bolt (spring washer) | |
| 55 | M6x12 | Hex.socket flange bolt (chromate) | |
| 56 | M5x10 | Hex.socket flange bolt (chromate) |
00a Table Frame A17 parts
| MS160000 | Frame bevt-z1501c ii 450×520/520 ×1 | ||
| 1 | A9014161 | Rubber foot for pipes(c-31-5) ×1 | |
| 2 | SJ140120C | Table stand (dyhe) ×1 | |
| 3 | SJ140131 | Table stand bracket(dyhe-c) ×1 | |
| 4 | MS140010 | Table stand bracket 01c ii ×1 | |
| 5 | SJ140220 | Table stand fixed knob bolt ×1 | |
| 6 | A9014163 | Color rubber foot(c-30-frb-3225) ×2 | |
| 7 | MM140030 | Support table catch stay(r) ×1 | |
| 8 | MS110000 | Frame bevt-z1201c ii 450×520/520 ×1 | |
| 9 | SC140120 | Table stopper ×4 | |
| 10 | SJ140050 | Oil store(l) dyhe p=520 ×1 | |
| 11 | SJ140040 | Oil store(r) dyhe p=520 ×1 | |
| 12 | MM140040 | Support table catch stay(l) ×1 | |
| 13 | A9019077 | Caster(stt-125gu m20x40) ×4 | |
| 14 | SC160031 | Mount base a'ssy (compact machine) ×4 | |
| 15 | SC160011 | Mount base(compact machine) ×4 | |
| 16 | SC160020 | Vibroisolating pad(compact machine) ×4 |
Head Bed B5 parts
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 |
01 B Head Bed B5 parts
| 1 | HP321720C | Encoder driving gear no.2 ×1 | |
| 2 | MM310100 | Encoder retainer (dthe) ×1 | |
| 3 | MF510000 | Encoder(with fixed frange) ×1 | |
| 4 | SC250080 | Encoder safety cover ×1 | |
| 5 | HP321710C | Encoder driving gear no.1 ×1 |
07 Color Change20 parts
| 1 | MS330010 | Color change cover(vt-01c ii) ×1 | |
| 2 | MM330040 | Color change bracket(dthe) ×1 | |
| 3 | MG330090C | Manual connecting shaft ×1 | |
| 4 | MM330030 | Color change motor bracket(dthe) ×1 | |
| 5 | MG330110 | Color change motor (ts3617n111e24) ×1 | |
| 6 | MG330040 | Color change cam connecting shaft ×1 | |
| 7 | MG330030 | Color change cam ×1 | |
| 8 | A9010109 | Polyester slider(stw-ft150) ×1 | |
| 9 | MM330020 | Color change base (dthe) ×1 | |
| 10 | A9011285 | Du bush with flange (k5f1510-23) ×1 | |
| 11 | MG330080 | Color change set collar ×1 | |
| 12 | MF510010 | Potentiometer(m-22e10-050) ×1 | |
| 13 | MG330070 | Potentiometer fixed plate ×1 | |
| 14 | A9012127 | E-ring 43 ×7 | |
| 15 | A9010063 | Miniature bearing ×7 | |
| 16 | KX330160 | Connecting roller shaft ×7 | |
| 17 | MM330080 | Connecting block(z12) ×1 | |
| 17 | MG330010 | Connecting block(z15) ×1 | |
| 18 | MM330070 | Color change connecting base plate (vt-z1201c ×1 | |
| 18 | MM330010 | Color change connecting base plate (vt-z1501c ×1 |
08 Drive23 parts
| 1 | MS310040 | Bearing case(main shaft) vt-01c ii ×1 | |
| 2 | A9010138 | Ball bearing with snap ring (6201zznr) ×1 | |
| 3 | A9020241 | Timing belt(b150s3m1332) ×1 | |
| 4 | MR310052 | Main shaft motor drive pulley (s3m,p=16) ×1 | |
| 5 | MS310030 | Main shaft motor fixed base(vt-01c ii) ×1 | |
| 6 | EDY00430 | 200w servo moter(ts4747n3221e60) ×1 | |
| 7 | MM250030 | Frame cover(dthe) ×2 | |
| 8 | A9010003 | Bearing 6001zz ×2 | |
| 9 | RQ310000 | Idler ×1 | |
| 10 | A9012063 | C-ring(for hole φ28) ×1 | |
| 11 | SC310021 | Idler shaft ×1 | |
| 12 | SC310030 | Idler bracket ×1 | |
| 13 | MR480230 | H-shaft motor timing pulley ×1 | |
| 14 | SC310062 | Lower shaft housing ×1 | |
| 15 | MS310020 | Lower shaft φ15×776l (vt-01c ii) ×1 | |
| 16 | SC310150 | Tension bracket ×1 | |
| 17 | MM310070 | Angle instructions plate(dthe) ×1 | |
| 18 | MS310060 | Rotary angle label(vt-01c ii) ×1 | |
| 19 | MS310010 | Upper shaft pulley (s3m, p60) vt-01c ii ×1 | |
| 20 | SC310071 | Upper shaft housing ×1 | |
| 21 | SJ310090 | Upper shaft φ20×740l(01c) ×1 | |
| 22 | MS310050 | Pulley box(vt-01cii) ×1 | |
| 23 | 1SPP5205200 | Shaft mogol & cover(vt-01c) ×1 |
10a Pantograph Drive A7 parts
| 1 | KF730760 | Clip(150l) ×4 | |
| 2 | KF730750 | Clip(300l) ×4 | |
| 3 | A9012437 | Knob nut(φ32 m6 tap hole) ×2 | |
| 4 | SC730041 | Pantograph fixing plate ×2 | |
| 5 | SC730031 | Pantograph fixed spacer b ×2 | |
| 6 | MM730000 | Pantograph frame (for c01,450×520) ×1 | |
| 7 | MM730010 | Pantograph a'ssy (c01,450×520) ×1 |
10b Pantograph Drive B12 parts
| 1 | FR92460434520S | Square pantograph a'ssy 460×434 offset(p=520) ×1 | |
| 2 | SC730092 | Product pantograph stay a'ssy ×2 | |
| 3 | LA730650 | Product pantograph hold spring ×2 | |
| 4 | LA730610 | Positioning pin ×4 | |
| 5 | LA730630 | Slide plate ×2 | |
| 6 | LA730590 | Pantograph stay main body ×2 | |
| 7 | SC730102 | Stay bracket for compact machine ×2 | |
| 8 | SC730111 | Spacer ×2 | |
| 9 | A9012437C | Knob nut(φ32 m6 tap hole) ×2 | |
| 51 | Truss screw M3×10 | Truss screw m3×10 | |
| 52 | Truss screw M4×10 | Truss screw m4×10 | |
| 53 | Hex.socket set screw M3×8(With nylons) | Hex.socket set screw m3×8(with nylons) |
10d Pantograph Drive D36 parts
| 1 | SC480330 | H-rail base fixed stay(rear) ×1 | |
| 2 | A9011244 | Bearing unit(ufl002d) ×1 | |
| 3 | A9011243 | Bearing unit(ufl002c) ×1 | |
| 4 | SJ480010 | H-rail base(st=450) dyhe ×1 | |
| 5 | SC480210 | H-rail base fixed stay(front) ×1 | |
| 6 | SC250040 | H-rail frout cover ×1 | |
| 7 | SC250070 | H-rail side cover ×2 | |
| 8 | SC480040 | L.m guide(540l) ×1 | |
| 9 | RP480201 | Pulley stopper ×1 | |
| 10 | HH481980 | 019 clamp ×1 | |
| 11 | MR480180 | H-shaft drive pulley ×1 | |
| 12 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 13 | MS480040 | H-pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 14 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×1 | |
| 15 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 16 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 17 | SJ480081 | Pulley bracket ×1 | |
| 18 | HH481991C | Timing pulley shaft ×1 | |
| 19 | MS480070 | Pantograph drive pulley (front) ma3-32t ×1 | |
| 20 | A9012052 | E-ring(φ10) ×1 | |
| 21 | MS480020 | Guide base(l) vt-01c ii ×1 | |
| 22 | SC480090 | Guide stay(l) ×1 | |
| 51 | Hex.socket bolt M5×15 (Chromate) | Hex.socket bolt m5×15 (chromate) | |
| 52 | Hex.socket bolt M6×20(Chromate) | Hex.socket bolt m6×20(chromate) | |
| 53 | Truss screw M4×6(Chromate) | Truss screw m4×6(chromate) | |
| 54 | Hex.socket bolt M4×10(Black) | Hex.socket bolt m4×10(black) | |
| 55 | Hex.socket bolt M4×12(With spring washer) | Hex.socket bolt m4×12(with spring washer) | |
| 56 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 57 | Hex.cap nut M8(Chromate) | Hex.cap nut m8(chromate) | |
| 58 | Hex.bolt M4×30(Chromate) | Hex.bolt m4×30(chromate) | |
| 59 | Hex.nut M4 | Hex.nut m4 | |
| 60 | Hex.bolt M4×40(Chromate) | Hex.bolt m4×40(chromate) | |
| 61 | Flange nut M4 | Flange nut m4 | |
| 62 | Hex.socket bolt M3×12(Black) | Hex.socket bolt m3×12(black) | |
| 63 | Hex.socket bolt M4×12(With adhesion) | Hex.socket bolt m4×12(with adhesion) | |
| 64 | Hex.socket bolt M3×15(Black) | Hex.socket bolt m3×15(black) |
12-210 parts
| 1 | PP710000 | Spool holder a'ssy(vy-z15) ×1 | |
| 2 | RD710370 | Hose hold bracket ×1 | |
| 3 | RD710340 | Guide base (15 needles) ×2 | |
| 4 | RD710330 | Thread guide base ×5 | |
| 5 | RD710380 | Number seal ×1 | |
| 6 | RD710361 | Pillar b ×2 | |
| 7 | RD710351 | Pillar a ×2 | |
| 10 | SC710010 | Spool holder base ×1 | |
| 11 | RV710050 | Db3-6×4 antistatic double wall tube ×Cut product | |
| 12 | MM710000 | Spool holder bracket(type 2 piece) $p=520$ ×1 |
10e Pantograph Drive E17 parts
| 1 | MS480120 | Bearing support plate (h-shaft) vt-01c ii ×1 | |
| 2 | MS480130 | Hex.stay, 30l(h-shaft) vt-01ci ×4 | |
| 3 | A9010138 | Ball bearing with snap ring(6201zznr) ×1 | |
| 4 | MS480080 | H-pantograph drive shaft(1260l) vt-01c ii ×1 | |
| 5 | MR480230 | H-shaft motor timing pulley ×1 | |
| 6 | A9020242 | H-pantograph drive timing belt(b150s3m405) ×1 | |
| 7 | MS480090 | Pantograph drive motor pulley(s3m,p15) ×1 | |
| 8 | MS480110 | H-shaft motor fixed plate (vt-01c ii) ×1 | |
| 9 | EDY00430 | 200w servo moter (ts4747n3221e60) ×1 | |
| 10 | MS480100 | H-shaft motor bracket(vt-01c i) ×1 | |
| 51 | Hex.socket bolt M4x12(Black) | Hex.socket bolt m4x12(black) | |
| 52 | Hex.socket bolt M5x14 (Black) | Hex.socket bolt m5x14 (black) | |
| 53 | Hex.socket set screw M5 6(Black) | Hex.socket set screw m5 6(black) | |
| 54 | Hex.socket bolt M5x12(Black) | Hex.socket bolt m5x12(black) | |
| 55 | Hex.bolt M6x20(Chromate) | Hex.bolt m6x20(chromate) | |
| 56 | Hex.nut M6(Chromate) | Hex.nut m6(chromate) | |
| 57 | Hex.socket bolt M4x16(Black) | Hex.socket bolt m4x16(black) |
10f Pantograph Drive F15 parts
| 1 | MM480150 | V-guide cover(dthe) ×1 | |
| 2 | SC481120 | V-guide cover stad a ×4 | |
| 3 | SC481130 | V-guide cover stad b ×2 | |
| 4 | MS480160 | V-slide bracket(01c ii) st=520 ×1 | |
| 5 | KN272401 | Stopper eccentric ×2 | |
| 6 | MS480140 | V-guide pantograph frame a'ssy (vt-01c ii) st ×1 set | |
| 7 | SJ480120 | Lm guide(l=1000) ×1 | |
| 8 | MS480150 | V-guide pantograph frame (vt-01c ii) st=520 ×1 | |
| 9 | SC480830 | V-guide felt(l=155) ×3 | |
| 51 | Hex.cap nut M4 | Hex.cap nut m4 | |
| 52 | Spring washer M4 | Spring washer m4 | |
| 53 | Plain washer M4 | Plain washer m4 | |
| 54 | Flush screw M4x10 | Flush screw m4x10 | |
| 55 | Hex.socket bolt M4x22(Black) | Hex.socket bolt m4x22(black) | |
| 56 | Hex.socket bolt M4x15(Black) | Hex.socket bolt m4x15(black) |
10h Pantograph Drive H43 parts
| 1 | MS480240 | Bearing case(v-shaft) vt-01c ii ×1 | |
| 2 | A9010138 | Ball bearing with snap ring (6201zznr) ×1 | |
| 3 | A9020243 | V-pantograph drive timing belt(b150s3m330) ×1 | |
| 4 | MS480090 | Pantograph drive motor pulley (s3m,p15) ×1 | |
| 5 | MS480230 | V-shaft motor fixed plate (vt-01c ii) ×1 | |
| 6 | EDY00430 | 200w servo moter(ts4747n3221e60) ×1 | |
| 7 | MS480220 | V-shaft motor bracket(vt-01c ii) ×1 | |
| 8 | MS480210 | V-shaft motor base(vt-01c ii) ×1 | |
| 9 | HH481980 | φ19 clamp ×1 | |
| 10 | MS480200 | V-shaft motor timing pulley (s3m,p60) ×1 | |
| 11 | MS480190 | Clamp(spline shaft) vt-01c ii ×2 | |
| 12 | A9011310 | Pillow unit(ucp201e4) ×1 | |
| 13 | SC480070 | Spline bearing bracket ×2 | |
| 14 | MM140001 | R-side stand table support(vt) ×1 | |
| 15 | A9011271 | Pillow unit(ucp201de4) ×1 | |
| 16 | MS480260 | Pantograph drive pulley cover(vt-01c ii) ×1 | |
| 17 | MS480251 | Pantograph pulley rear cover(vt-01c ii) ×1 | |
| 18 | EDY00270 | Photointerrupter(gp1a75e) ×2 | |
| 19 | EP530231 | H-sensor cable(vt) ×1 | |
| 20 | MM480061 | H-sensor bracket(vt) ×1 | |
| 51 | M5×10(Black) | Hex.socket bolt | |
| 51 | Hex.socket bolt M5×10(Black) | Hex.socket bolt m5×10(black) | |
| 52 | Hex.socket set screw M5×6(Black) | Hex.socket set screw m5×6(black) | |
| 52 | M5×6(Black) | Hex.socket set screw | |
| 53 | Hex.nut M6(Chromate) | Hex.nut m6(chromate) | |
| 53 | M6(Chromate) | Hex.nut | |
| 54 | Hex.bolt M6×20(Chromate) | Hex.bolt m6×20(chromate) | |
| 54 | M6×20(Chromate) | Hex.bolt | |
| 55 | Hex.socket bolt M4×12(Spring washer) (Black) | Hex.socket bolt m4×12(spring washer) (black) | |
| 55 | M4×12(Spring washer) (Black) | Hex.socket bolt | |
| 56 | M5×15(Black) | Hex.socket bolt | |
| 56 | Hex.socket bolt M5×15(Black) | Hex.socket bolt m5×15(black) | |
| 57 | M5×20(Black) | Hex.socket bolt | |
| 57 | Hex.socket bolt M5×20(Black) | Hex.socket bolt m5×20(black) | |
| 58 | M8×25(Black) | Hex.socket bolt | |
| 58 | Hex.socket bolt M8×25(Black) | Hex.socket bolt m8×25(black) | |
| 59 | M6×18 | Hex.socket bolt | |
| 59 | Hex.socket bolt M6×18 | Hex.socket bolt m6×18 | |
| 60 | M6×12(Chromate) | Hex.socket flange bolt | |
| 60 | Hex.socket flange bolt M6×12(Chromate) | Hex.socket flange bolt m6×12(chromate) | |
| 61 | Truss screw M5×8 | Truss screw m5×8 | |
| 62 | Truss screw M3×8 | Truss screw m3×8 | |
| 63 | Truss screw M4×8 | Truss screw m4×8 |
11a Control A21 parts
| EAY092A11 | Vt-2 automat (w/usb reader) ×1 | ||
| 1 | EAY092A1 | Vt automat (w/cf reader ×1 | |
| 2 | MS510050 | Emergency stop switch a'ssy(vt-01cⅡ) ×1 | |
| 3 | MR510002 | Emergency stop switch fixing plate ×1 | |
| 4 | MS510040 | Automat bracket(vt-01c ii) ×1 | |
| 5 | MM510070 | Controller fixed stay(dthe) ×1 | |
| 6 | MS510030 | Power box set bracket(vt-01cⅡ) ×4 | |
| 7 | EDY00460 | Vt servo 11020 power unit ×1 | |
| 51 | Hex.socket bolt M4x5 | Hex.socket bolt m4x5 | |
| 51 | M4x5 | Hex.socket bolt | |
| 52 | M4x10 | Pan screw | |
| 52 | Pan screw M4x10 | Pan screw m4x10 | |
| 53 | Hex.socket flange bolt M5x12 | Hex.socket flange bolt m5x12 | |
| 53 | M5x12 | Hex.socket flange bolt | |
| 54 | Hex.socket flange bolt M4x10 | Hex.socket flange bolt m4x10 | |
| 55 | M6x15 | Hex.socket bolt | |
| 55 | Hex.socket bolt M6x15 | Hex.socket bolt m6x15 | |
| 56 | M5x8 | Truss screw | |
| 56 | Truss screw M5x8 | Truss screw m5x8 | |
| 57 | M3x6 | Truss screw | |
| 57 | Truss screw M3x6 | Truss screw m3x6 |
12-1 Accessories(z12)14 parts
| 1 | MM710010 | Spool holder a'ssy(z1201c) ×1 | |
| 2 | HT240480 | Thread guide ceramic(white) ×26 | |
| 2 | HT240490 | Thread guide ceramic(gray) ×4 | |
| 3 | HP241430 | Second tension unit complete ×12 | |
| 4 | KF710390 | Spool holder felt(8×34×470) ×12 | |
| 5 | HT710000 | Spool holder rod ×12 | |
| 6 | SK710000 | Spool holder base block ×2 | |
| 7 | SH710010 | Spool holder plate(dyh-z12) ×2 | |
| 51 | Hex.socket bolt M5×10(With spring washer) | Hex.socket bolt m5×10(with spring washer) | |
| 52 | Hex.socket set screw M5×8 | Hex.socket set screw m5×8 | |
| 53 | Flush screw M4×8 | Flush screw m4×8 | |
| 54 | Hex.socket flang bolt M6×25 | Hex.socket flang bolt m6×25 | |
| 55 | Hex.socket set screw M6×8 | Hex.socket set screw m6×8 | |
| 56 | Hex.socket bolt M6×15(Black) | Hex.socket bolt m6×15(black) |
12-2 Accessories (z15)12 parts
| 1 | PP710000 | Spool holder a'ssy(vy-z15) ×1 | |
| 2 | RD710370 | Hose hold bracket ×1 | |
| 3 | RD710340 | Guide base (15 needles) ×2 | |
| 4 | RD710330 | Thread guide base ×5 | |
| 5 | RD710380 | Number seal ×1 | |
| 6 | RD710361 | Pillar b ×2 | |
| 7 | RD710351 | Pillar a ×2 | |
| 8 | KF710390 | Spool holder felt(8×34×470) ×15 | |
| 9 | HT710000 | Spool holder pin ×15 | |
| 10 | SC710010 | Spool holder base ×1 | |
| 11 | RV710050 | Db3-6×4 antistatic double wall tube | |
| 12 | MM710000 | Spool holder bracket(type 2 piece) p=520 ×1 |
12-1 Accessories (z12)2 parts
| 3 | HP241430 | Second tension unit complete ×12 | |
| 4 | KF710390 | Spool holder felt(8×34×470) ×12 |
04a-1 Needle Bar A(z12)5 parts
| 4 | HT230251 | Needle bar spring(upper) ×12 | |
| 5 | HT230330 | Cloth hold set clamp ×12 | |
| 6 | HT230263 | Washer for set clamp ×12 | |
| 10 | KF232130 | O-ring(1b-as568-902) c03091b ×12 | |
| 11 | HT230120 | Washer 2.4 ×12 |
04a-2 Needle Bar A (z15)5 parts
| 15 | HT230251 | Needle bar spring(upper) ×15 | |
| 16 | HT230330 | Cloth hold set clamp ×15 | |
| 17 | HT230263 | Washer for set clamp ×15 | |
| 21 | KF232130 | O-ring(1b-as568-902) c03091b ×15 | |
| 22 | HT230120 | Washer 2.4 ×15 |
10g10 parts
| 2 | MS480070 | Pantograph drive pulley(front) ma3-32t ×1 | |
| 3 | MR480160 | Timing belt(020-ma3-20000e-l) ×1 | |
| 5 | SJ480090 | V-pulley bracket ×1 | |
| 7 | MS480170 | V-guide base plate (vt-01c ii) ×1 | |
| 8 | MS480050 | Pantgraph belt clamp spacer(vt-01c ii) ×1 | |
| 9 | MS480060 | Pantgraph belt clamp base (vt-01c ii) ×1 | |
| 10 | MS480030 | Pantgraph drive belt clamp(ma3) vt-01c ii ×2 | |
| 11 | SC480230 | V-slide block plate ×1 | |
| 15 | MS480180 | Ball spline iko+pulley (s3m, p26) ×1 | |
| 16 | MM480170 | V-slide block l(dthe) ×1 |
11a5 parts
| 2 | MS510050 | Emergency stop switch a'ssy(vt-01cⅡ) ×1 | |
| 3 | MR510002 | Emergency stop switch fixing plate ×1 | |
| 4 | MS510040 | Automat bracket(vt-01c ii) ×1 | |
| 5 | MM510070 | Controller fixed stay(dthe) ×1 | |
| 6 | MS510030 | Power box set bracket(vt-01cⅡ) ×4 |
02a11 parts
| 2 | SJ270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 2 | SG270121 | Throat plate a'ssy(with lower thread support) ×1 | |
| 3 | SG270020 | Cylinder throat plate ×1 | |
| 3 | SJ270020 | Cylinder throat plate ×1 | |
| 5 | SG270110 | Lower thread support hook and loop fastener ×1 | |
| 5 | SJ270110 | Lower thread support hook and loop fastener ×1 | |
| 6 | SG270040 | Fixed knife barrel frame correspondence ×1 | |
| 6 | SJ270040 | Fixed knife barrel frame correspondence ×1 | |
| 8 | SG270030 | Driving knife barrel frame correspondence ×1 | |
| 8 | SJ270030 | Driving knife barrel frame correspondence ×1 | |
| 15 | SJ210040 | Solenoid stay(short small bobbin) ×1 |
Part numbers are listed for identification. Check the part number on your machine or use the free compatibility check before ordering.
Barudan BEVT Parts: common questions
Which Barudan BEVT parts do you sell?
We currently list 3 parts and accessories for Barudan BEVT machines, including Motors & Drivers (2), Floppy, USB & Memory (1). Listings show the part number and compatible machines wherever the maker provides them.
How do I know a part fits my Barudan BEVT machine?
Match the part number on your old part with the listing, or use ISA, our free compatibility check: upload a photo of your part or machine label on any product page and get an answer in seconds, before you order.
Are import duties included?
Yes. Prices include import duty, so there are no customs fees to pay at delivery.
Do you ship worldwide?
Yes, every order ships with tracking. The delivery estimate for your country is shown on each product page, and you can follow your parcel on our tracking page.
