Showing 1–10 of 67 resultsSorted by latest
Tajima TFMX Parts
Spare parts listed for the Tajima TFMX: belts, pulleys & gears, needles & needle bars, circuit boards & electronics, motors & drivers and more. Check the part number and fit on each listing, or ask ISA with a photo. 60+ items in stock, import duty included.
-30%
Tajima 16 Tooth 15 Axis 2cm Pulley for TFMX, TMBP, TMEZ, TMAR Series Embroidery Machines
In stock
Original price was: $ 98.70.$ 69.09Current price is: $ 69.09.
![Tajima W50-16[S] Synchronous Drive Wheel TFMX, TMAR, TMEZ, TMBP-SC, TFGN, TMFX, TMEF](https://ae01.alicdn.com/kf/S0fb9a48b6520424f979b7a9a712ee10fs.jpg_640x640.jpg)
-30%
Tajima W20-16 Timing Belt Pulley CX0170000000 501440030000 S5M 20mm for TMFX, TFMX, TFMX-C, TMAR, TMBP, TEJT, TFMX-II Series
In stock
Original price was: $ 56.13.$ 39.29Current price is: $ 39.29.
-30%
Tajima 47 Machine Head 3.5cm Spindle Pulley Belt Wheel Auxilwheel 15 Axle, Auxilwheel 18 Axle, MainWheel20T 18Shaft for TMB TMAR TFGN TFMX Series
In stock
Price range: $ 49.99 through $ 105.49
Tajima TFMX-IIC parts map
Every part in the machine parts list, by assembly. Part numbers from the Tajima parts list P-MJ14-E (2018).
16 / 1338parts in our shop
Other Parts412 parts · 6 in shop
| 11 | 640900010001 | Potentiometer | $ 132.99 → |
| 12 | 0J4204400000 | Card:magnetic sensor a | $ 26.49 → |
| 14 | 050260010020 | Bobbin regular rotary hook | $ 11.09 → |
| 16 | 0C0220080000 | Spring hook | $ 5.49 → |
| 18 | 507309040020 | Torsion spring:0.9mm dia. | $ 8.09 → |
| 23 | 080280070000 | Take-up lever guide rail | $ 12.99 → |
| 1 | 2Q4@@@@40000 | Table | |
| 1 | 04013010JS20 | Gear box:jumbo rotary hook[s] | |
| 1 | 040130100S20 | Gear box:regular rotary hook[s] | |
| 1 | 646100090010 | Circuit protector :3-phase 10a | |
| 1 | 0G3150080S10 | Joint plate : frame holder :p360[s] | |
| 1 | 1DA@@@@@@010 | Thread stand plate | |
| 1 | 070120430010 | Cover:change | |
| 1 | 07041001@000 | Side base: change :l | |
| 1 | 170110080000 | Cover: tightening collar | |
| 1 | 050120090S00 | Cylinder bed[s] | |
| 1 | 0F4310050010 | Bracket:bearing case | |
| 1 | 080120070010 | Head | |
| 1 | 09053002@000 | Take-up lever cover | |
| 1 | 16091005BS10 | Y-drive base :no.9 :b:r[s] ×6H500P, 8H | |
| 1 | 16091005AS10 | Y-drive base :no.9:a:r[s] ×2H, 4H, 6H360P | |
| 1 | 080210360A70 | Needle bar reciprocator:gn[a] | |
| 1 | 0B0110650S10 | Hook[s] | |
| 1 | 0F4150110000 | Plate:x motor | |
| 2 | 0F4150130000 | Joint block: plate | |
| 2 | S550031202SD | Countersunk tapping screw:3p*12 | |
| 2 | 511353010000 | Pan head screw:9/64*25 | |
| 2 | 0G314016LS20 | Frame holder:l:y450[s] | |
| 2 | 0D011004A020 | Base:thread stand plate | |
| 2 | 0D011004B020 | Base:thread stand plate | |
| 2 | 08025004@000 | Linear wayneedle bar case | |
| 2 | 507307010010 | Torsion spring :0.7mm dia. | |
| 2 | 070120440S20 | Base:change motor[s] | |
| 2 | 07041002@S00 | Side base: change :r[s] | |
| 2 | 0F4220020020 | Bracket:y-drive base | |
| 2 | 508315010S00 | Bearing case: no.3:15mm dia.[s] | |
| 2 | 050310110000 | Rotary hook base stud | |
| 2 | 030460050010 | Bracket:cover | |
| 2 | 03013013B000 | Bracket :breaker :b | |
| 2 | 03013013A000 | Bracket :breaker:a | |
| 2 | 506132030000 | Spur gear :32t | |
| 3 | 07041003@000 | Joint plate:change : upper | |
| 3 | 0B0110420000 | Base: hook motor | |
| 3 | 641400200000 | Noise filter:3-phase | |
| 3 | 641400140000 | Noise filter: single-phase | |
| 3 | 502607010010 | Collar:no.2:7mm dia. | |
| 3 | 502815010000 | Needle collar: 15mm dia. | |
| 3 | 08025005@000 | Reinforcing plate | |
| 3 | 0F4220030020 | Bracket:y-drive base | |
| 3 | 0G314016RS20 | Frame holder : r:y450[s] | |
| 3 | 070120450S30 | Bearing case : change[s] | |
| 3 | 0F4150120000 | Cover:speed reduction box | |
| 3 | 080210110010 | Holder: jump spring | |
| 3 | 13425006B000 | Cover:y motor :b | |
| 3 | 13425006A000 | Cover:y motor :a | |
| 3 | 02230420000 | Cover:y motor :a/ges | |
| 3 | 17016007@000 | Top cover:330-750p | |
| 3 | 09021025@A00 | Roller-type middle thread guide[a] | |
| 3 | 506132020S00 | Spur gear:32t[s] | |
| 3 | 134250050000 | Cover:y motor | |
| 4 | 502522010010 | Collar:spring guide | |
| 4 | 0F4310120010 | Spiral pulley : 25mm dia. | |
| 4 | 643400030000 | Terminal base :6p | |
| 4 | 0J1501800000 | Cord clamp | |
| 4 | 0D0210140010 | Collar:no.1:5mm dia. | |
| 4 | 07041004@000 | Joint plate: change: lower | |
| 4 | 040130020010 | Base shaft : rotary hook | |
| 4 | 08042002L020 | Head front cover:l | |
| 4 | 660300050000 | Linear way:lwl-15c2r580 | |
| 4 | 506528030000 | Spiral bevel gear: no.1:28t | |
| 4 | 0G314001A020 | Stopper:no.1 | |
| 4 | 13425006C000 | Cover:y motor : c | |
| 4 | 0F4160400000 | Base:bearing case plate | |
| 4 | 080210270S40 | Needle bar reciprocator[s] | |
| 4 | 511103010000 | Flat fillister head screw : m3*4.3 | |
| 4 | 0C0230210000 | Sensor arm | |
| 5 | 0J6108302A00 | Pulse motor :56mm square:with sensor[a] | |
| 5 | 0F4160390000 | Bearing case plate | |
| 5 | 0F4230230010 | Belt catcher:no.2:y | |
| 5 | 17133@@@0020 | Base:start/stop switch | |
| 5 | 519112010000 | Plain washer: 10.3*14*t0.5 | |
| 5 | 09021025@000 | Base roller-type middle thread guide | |
| 5 | 134290070000 | Table cover :ath box | |
| 5 | 08042002R000 | Head front cover:r | |
| 5 | 0F4310150000 | Cover: auxiliary drive base | |
| 5 | 070120480010 | Reinforcing plate:change motor base | |
| 5 | S301041501SD | Plain washer :4*15*t2.0 | |
| 5 | 645300190011 | Dc power supply :24v | |
| 5 | 506514030000 | Spiral bevel gear: no.1:14t | |
| 5 | 0D0210130000 | Joint:spiral tube | |
| 5 | 507815060010 | Plate spring: holder base:t1.5 | |
| 6 | 645300030000 | Dc power supply :5v +/-12v | |
| 6 | 502110070000 | Stopper collar: 10mm dia. | |
| 6 | 0F4230240000 | Belt catcher:no.1:y | |
| 6 | 640600121001 | Solenoid:open frame | |
| 6 | 501445080S10 | Timing pulley :w20-48[s] | |
| 6 | 502212020000 | Tightening collar:12mm dia. | |
| 6 | 0D0210052A00 | Spiral tube :l230[a] | |
| 6 | 15121005L050 | Table support : no.12:l | |
| 6 | 0G314002B020 | Stopper:no.2 | |
| 6 | 080210410040 | Reciprocating slide block | |
| 6 | 0F4310161510 | Auxiliary drive base:a/ges[s] | |
| 6 | 507308190010 | Torsion spring :0.8mm dia. | |
| 6 | 519108030000 | Plain washer:7.94*19*t0.8 | |
| 6 | 090210140S10 | Adjusting lever[s] | |
| 6 | 17111015LS00 | Bracket :front cover : l[s] | |
| 6 | 070120420010 | Base:change | |
| 7 | 509472050010 | Plastic bushing: no.2:7.24mm dia. | |
| 7 | 511F05110S00 | Knobbed screw:no.2:m5*6[s] | |
| 7 | 0B0110470000 | Lever: hook | |
| 7 | 17111015RS00 | Bracket :front cover:r[s] | |
| 7 | 502107020000 | Stopper collar:7.94mm dia. | |
| 7 | 15121005R050 | Table support : no.12:r | |
| 7 | 507607160000 | Compression spring :0.7mm dia. | |
| 7 | 080270010010 | Lever:solenoid | |
| 7 | 502715080000 | Bearing collar : 15mm dia. | |
| 7 | 623B00010000 | Timing belt :ma5:w25-249e/ly ×2H, 4H, 6H360P | |
| 7 | 623B00020000 | Timing belt : ma5:w25-272e/ly ×6H500P, 8H | |
| 7 | 0J6110600000 | Pulse motor:56mm square:double-end | |
| 7 | 070420020000 | Baseball screw | |
| 7 | 661100090010 | Slide rail : 330lmm2205 | |
| 7 | 0D0110420000 | Base:thread stand stud | |
| 7 | 0J2101601030 | Card:power supply :single-phase | |
| 7 | 0J2101600030 | Card:power supply :3-phase | |
| 8 | 507305020020 | Torsion spring :0.5mm dia. | |
| 8 | 090210050020 | Ratchet | |
| 8 | 07032012@000 | Ball screw:change | |
| 8 | 623300020000 | Timing belt :sptg:w20-s5m0325/g | |
| 8 | S530041801SD | Truss head tapping screw : 4p*18 | |
| 8 | 080210090000 | Damper bracket: needle bar reciprocator | |
| 8 | 0G3150110S10 | Joint plate : frame holder :p500[s] | |
| 8 | 070120130000 | Shaft:change cam | |
| 8 | 050330430000 | Shaft:rotary hook :7.94mm dia. | |
| 8 | 0J0303500A10 | Xy-axis driver:x13-c[a] | |
| 8 | 0B0110080010 | Connecting plate: hook | |
| 8 | 17102@@@0000 | Front cover:no.2:1st | |
| 8 | 0D0110410000 | Thread stand stud | |
| 8 | 519212030000 | Plastic washer: 10.2*15*t0.5 | |
| 8 | 0F4310090000 | Cover slide rail | |
| 8 | 0F423036L010 | Z-spec. frame arm:l | |
| 9 | 0B0110510000 | Slide: hook | |
| 9 | 090210160010 | Tension collar : no.1 | |
| 9 | 0J2502300050 | Card:machine | |
| 9 | 0F423036R010 | Z-spec. frame arm:r | |
| 9 | 503201030000 | Stepped pin:no.1 | |
| 9 | 080520018010 | Knob:b | |
| 9 | 0P0600140010 | Label:start/stop switch | |
| 9 | 050330640S00 | Needle plate bracket[s] | |
| 9 | 0F4310170000 | Auxiliary drive arm | |
| 9 | 502210040000 | Tightening collar: 10mm dia. | |
| 9 | 15213013L000 | Table holder:l | |
| 9 | 513354060A20 | Screw with pin : no.3 :11/64-7.9[a] | |
| 9 | 51030006@000 | Spacer:no.3:t0.1-1 | |
| 9 | 0G3140170S20 | Frame holder: adjust type :y450[s] | |
| 9 | 0D0110022010 | Thread stand ring:t10 | |
| 9 | 502505010000 | Collar:no.1:3.1mm dia. | |
| 10 | 519204010000 | Washer:2.6*7*t0.5 | |
| 10 | 080290040S10 | Roller pin[s] | |
| 10 | 513354060020 | Screw with pin: no.3:11/64-7.9 | |
| 10 | 308@@@010A10 | Border frame[a] | |
| 10 | 611400080000 | Spring pin :3*12 | |
| 10 | 0F4310100S20 | Wire auxiliary drive[s] | |
| 10 | 170120010000 | Front cover:no.7:l90 | |
| 10 | 0F4150100000 | Plate:86mm dia. motor | |
| 10 | 0F4150090000 | Plate:60mm square motor ×2H | |
| 10 | 08052001C010 | Knob:c | |
| 10 | 0F0110170500 | Bracket:y-axis sensor[s] | |
| 10 | 03014003A010 | Holder harness :a | |
| 10 | 0D0210313010 | Thread course support bar:l345 | |
| 10 | 080270040S10 | Lever:drive[s] | |
| 10 | 15213013R000 | Table holder:r | |
| 10 | 507204010010 | Thread take-up spring: no.2 :0.4mm dia. | |
| 11 | 080240120010 | Wick:2.5*1*22 | |
| 11 | 0J0603300A20 | Switch:cylinder head[a] | |
| 11 | 0J0303400A10 | Main shaft driver:x13-b:400[a] | |
| 11 | 0F4230250010 | Bracket: origin sensor | |
| 11 | 050330660000 | Rotary hook support | |
| 11 | 501440050S00 | Timing pulley :w20-16[s] | |
| 11 | 070420110500 | Drive block[s] | |
| 11 | 501DB3020000 | R pulley:30.2mm dia. | |
| 11 | 070420110S00 | Drive block[s] | |
| 11 | 090210170010 | Tension collar : no.2 | |
| 11 | 15121007L000 | Brackettable support:l | |
| 11 | 0B0110520020 | Guide: hook | |
| 11 | 501440040S00 | Timing pulley:w20-16[s] ×2H | |
| 11 | 0G0240030000 | Felt:t1.9[s] | |
| 11 | 080250190000 | Guide plate: needle bar case | |
| 11 | 0D0110010010 | Thread stand blade | |
| 11 | 0J0303300A10 | Main shaft driver: x13-a:200[a] | |
| 12 | 0C0420020010 | Bracket:potentiometer | |
| 12 | 09021023@000 | Straight pin:5mm dia. | |
| 12 | 631200090000 | Bearing:608zz | |
| 12 | 17046@@@0000 | Front cover:no.2 | |
| 12 | 15121007R000 | Bracket: table support :r | |
| 12 | 07042001@000 | Guide shaft :06/12/15-needle | |
| 12 | 0J4500200010 | Counter: electro-magnetic | |
| 12 | 080250200000 | Guide bracket: needle bar case | |
| 12 | 1EA@@@@@@@00 | Thread course | |
| 12 | 0J6105400A10 | Pulse motor :60mm square :with sensor[a] ×2H | |
| 12 | 0B0120050000 | Cover:hook | |
| 12 | 51910604@020 | Plain washer:6*9.5*10.05-0.5 | |
| 12 | 0G052021@S00 | Border frame clip: bff8 :l100-300[s] | |
| 12 | 050230090010 | Rotary hook: khs12-ryptfsoe | |
| 12 | 0J6107200A10 | Pulse motor :86mm dia. with sensor[a] | |
| 13 | 0F4230220000 | Side cover:y-drive base | |
| 13 | 519104040000 | Plain washer :4*12*t2 | |
| 13 | 930100300A00 | Supporter:bs-450e[a] | |
| 13 | 17045@@@0000 | Front cover:no.1 | |
| 13 | 0F4150150000 | Base:tension shaft holder | |
| 13 | 51650101@010 | Thread guide collar :4.5mm dia. | |
| 13 | 512153020000 | Stepped screw:no.1:9/6410* | |
| 13 | 0J2703300040 | Card head:s5b | |
| 13 | 090210180010 | Stopper collar : 5mm dia. | |
| 13 | 511153010010 | Flat fillister head screw :9/64*4 | |
| 13 | 152140100020 | Joint: table | |
| 13 | 070420040000 | Belt presser plate :s3m-w6mm | |
| 13 | 050290020000 | Rotary hook set screw:11/64*7.2 | |
| 13 | 080430220000 | Side cover:head:lower | |
| 13 | 506120040020 | Spur gear :20t | |
| 14 | 0L0350310000 | Belt catcher:s3m | |
| 14 | 0F4160430000 | Wiring guard:60mm square motor ×2H | |
| 14 | 0F4160440000 | Wiring guard:86mm dia. motor | |
| 14 | 506140060020 | Spur gear :40t | |
| 14 | 09021009@S30 | Roller-type middle thread guide[s] | |
| 14 | 17111014LS00 | Bracket :front cover:l[s] | |
| 14 | 080240060000 | Felt:14mm dia. ×1 | |
| 14 | S530030801SD | Truss head tapping screw :3p*8 | |
| 14 | 0F4310030010 | Stepped pin:pulley | |
| 14 | 080430010000 | Side cover:head: upper | |
| 14 | 0F4210010010 | Holder: timing pulley | |
| 14 | UD1100000200 | Thread tension :tube :b | |
| 14 | 15121002L050 | Table support : no.12:l | |
| 15 | 503101150020 | Straight pin:no.1:3mm dia. | |
| 15 | 502541030010 | Collar:no.1:4.1mm dia. | |
| 15 | 070110090000 | Cam:change | |
| 15 | 0C0220150000 | Knob:thread tension :a | |
| 15 | 0B0110370010 | Spacer: slide hook | |
| 15 | 080240220000 | Felt:14mm dia. ×1 | |
| 15 | 050240150000 | Bobbin case: regular rotary hook:standard | |
| 15 | 17111014RS00 | Bracket :front cover :r[s] | |
| 15 | 6211900@0000 | Timing belt:sptg:w6 | |
| 15 | 0F4160360010 | Stay:wiring | |
| 15 | 15121002R050 | Table support : no.12:r | |
| 15 | 030790080000 | Box stick-on plate | |
| 15 | 080320490000 | Bracket: jump motor | |
| 15 | 501452040010 | Timing pulley : w25-16 | |
| 16 | 505404030020 | Stud:no.4:m4-27.5 | |
| 16 | 080210420A20 | Presser foot reciprocator:47mm st[a] | |
| 16 | 512104100040 | Stepped screw:no.1:m4*6.7 | |
| 16 | 0F4150140000 | Cover :60mm square motor | |
| 16 | 0J6110700T10 | Pulse motor :42mm square :double-end [t] | |
| 16 | 070320020500 | Bearing case: timing pulley :b[s] | |
| 16 | 634100060000 | Needle bearing :hk-1010 | |
| 16 | 17121@@@0010 | Joint plate | |
| 16 | 070320020S00 | Bearing case: timing pulley :b[s] | |
| 16 | 0F4310070010 | Boss | |
| 16 | 505103020000 | Stud:no.1:m3-47.9 | |
| 16 | 15121004L050 | Table support:no.12 | |
| 16 | 516503010010 | Thread guide collar :1.8mm dia. | |
| 16 | 050321510S00 | Lever shaft:knife[s] | |
| 17 | 080210420S10 | Presser foot reciprocator :47mm st[s] | |
| 17 | 080320410000 | Damper ring :4mm dia. | |
| 17 | 502510050000 | Collar:no.1:10mm dia. | |
| 17 | 505108160000 | Stud:no.1:m8*35 | |
| 17 | 17101@@@0000 | Front cover:no.1:1st | |
| 17 | 502112050000 | Stopper collar: 12mm dia. | |
| 17 | 0J1108300000 | Box:breaker | |
| 17 | 611100070000 | E-ring:4mm dia. | |
| 17 | 501221010000 | Timing pulley:w6-10 | |
| 17 | 511553010010 | Round countersunk head screw:9/64*3.5 | |
| 17 | 0F4310020000 | Cover:r-pulley | |
| 17 | 507706010000 | Taper spring :0.6mm dia. | |
| 18 | 0C0220160010 | Tension disk | |
| 18 | 030390160010 | Base: table stay | |
| 18 | 0J1108400000 | Cover :breaker box | |
| 18 | 090210190010 | Holder:straight pin | |
| 18 | 503101200010 | Straight pin : no.1:10mm dia. | |
| 18 | 080210180S20 | Damper bracket:presser foot reciprocator[s] | |
| 18 | 519208040000 | Plastic washer :6.2*9.5*t0.5 | |
| 18 | 503102190010 | Straight pin :no.2 | |
| 18 | 050320930010 | Thread separating plate: direct movement 2-blade type | |
| 18 | 0F4310140000 | Bracket: auxiliary drive base | |
| 19 | 519214010000 | Plastic washer: 12.2*18*t0.5 | |
| 19 | 0L0210030S00 | Needle bar drive shaft : automatic lubrication[s] | |
| 19 | 0J0605800T00 | No fuse breaker :3-phase 15a[t] | |
| 19 | 501452020010 | Timing pulley:w25-16 | |
| 19 | 550042001SD | Countersunk tapping screw :4p*20 | |
| 19 | 050320920010 | Movable knife: direct movement 2-blade type | |
| 19 | 0C0210040000 | Thread tension stud:with groove | |
| 19 | 503202050010 | Stepped pin :no.2 | |
| 19 | 080320420010 | Leverjump | |
| 19 | 09021022@000 | Straight pin:3mm dia. | |
| 20 | 0J1801800000 | Base: transformer : c | |
| 20 | 080310170000 | Knob:clutch lever | |
| 20 | 030390170010 | Bracket: table stay | |
| 20 | S301040801KC | Washer:4.8*8*t0.8 | |
| 20 | 502712020000 | Bearing collar:12mm dia. | |
| 20 | 050321520000 | Fixed knife: direct movement 2-blade type | |
| 20 | 0L0210030000 | Needle bar drive shaft: automatic lubrication | |
| 20 | 0D0210150030 | Thread tension guide: tube | |
| 21 | 0B020033XA00 | Upper thread holder: 15-needle[a] | |
| 21 | S180061001SD | Wing bolt:m6*l10 | |
| 21 | 0J0901400A30 | Transformer :separate :x13a[a] | |
| 21 | 0J0902400A00 | Transformer: separate :x15[a] | |
| 21 | 050321530000 | Under thread presser | |
| 21 | 0B020036@A00 | Upper thread holder[a] | |
| 21 | 0F0170110010 | Shaft:y-axis pulley | |
| 21 | 080240020010 | Wick:3.5p*183 | |
| 21 | 515110010010 | Roller :4.7mm dia. | |
| 22 | 050321540S00 | Connecting plate:knife[s] | |
| 22 | 080240070000 | Felt:needle bar drive shaft :b | |
| 22 | 512154010020 | Stepped screw:no.1:11/6414.7* | |
| 22 | 0B0200010000 | Bracket : upper thread holder | |
| 22 | 504312010010 | Tightening joint: 12mm dia. | |
| 22 | 0J5101100000 | Cover:power supply | |
| 22 | 030540020S10 | Stay: table[s] | |
| 23 | 0B0200050000 | Thread suspender disk | |
| 23 | 644500170000 | Nylon clamp:18n | |
| 23 | 070420050000 | Guide plate: potentiometer | |
| 23 | 080250170S20 | Guide: needle bar case[s] | |
| 23 | 050320850S20 | Lever shaft: knife connecting plate[s] | |
| 23 | QQ4@030@@010 | Y shaft | |
| 23 | 030540010000 | Holder:table stay | |
| 24 | 080240130000 | Felt:needle bar drive shaft | |
| 24 | 050321000000 | Lever knife connecting plate shaft | |
| 24 | 180062001SD | Wing bolt:m6*l20 | |
| 24 | 507603020010 | Compression spring:0.3mm dia. | |
| 24 | 07043001@S00 | Cover:change : upper[s] | |
| 24 | 644501630000 | Stud:no.1:m4-30 | |
| 24 | 0J6106700A20 | Pulse motor:86mm dia. with sensor[a] | |
| 24 | 0L0431030010 | Lever :sequin | |
| 25 | 0B0200060000 | Presser : thread suspender spring | |
| 25 | 513153060010 | Screw with pin:no.1:9/64-4 | |
| 25 | 030620030020 | Stopper table | |
| 25 | 644500690000 | One-touch collar : ta-310 | |
| 25 | 0F4230200000 | Bracket:y motor | |
| 25 | 503101130000 | Straight pin :no.1:8mm dia. | |
| 25 | 07043002@S00 | Cover:change : lower[s] | |
| 25 | 050321450A00 | Base:solenoid[a] | |
| 26 | 512153040000 | Stepped screw : no.1:9/64*7.5 | |
| 26 | 644500890000 | Spacer: hexagon :l6 :m3 | |
| 26 | 615500030001 | Toggle clamp:gy1001 | |
| 26 | 050321560000 | Rubber packing | |
| 26 | 0F4230350000 | Base:y motor | |
| 26 | 080230020000 | Lever: take-up lever | |
| 26 | 080320380000 | Base: clutch lever | |
| 27 | 080320370S30 | Clutch lever[s] | |
| 27 | 152130050000 | Table aligning plate | |
| 27 | 0J2503700000 | Card:usb hub | |
| 27 | 0J6105700A20 | Pulse motor: 106mm dia. with sensor[a] | |
| 27 | 512104180000 | Stepped screw : no.1:m412.2* | |
| 27 | 0B020034XS00 | Base: upper thread holder: 15-needle[s] | |
| 27 | 644100040000 | Cord clamp | |
| 27 | 0B020009@S00 | Base:upper thread holder[s] | |
| 28 | 030790040000 | Felt:lid holder | |
| 28 | 512203010010 | Stepped screw : no.1:m3*2.8 | |
| 28 | 0B020034X000 | Base:upper thread holder:15-needle | |
| 28 | 0B020009@000 | Base:upper thread holder | |
| 28 | 515121050020 | Roller :4.7*7.94*4 | |
| 28 | 0F4320120010 | Bracket:y motor | |
| 28 | 512130010010 | Stepped screw : no.1:m2.5*6 | |
| 28 | 0L222001@000 | Bracket: harness | |
| 29 | 519104060000 | Plain washer :4*7.5*t0.8 | |
| 29 | 050321480000 | Connecting plate: picker | |
| 29 | 504315010000 | Tightening coupling: 15mm dia. | |
| 29 | 0B020007@000 | Velcro | |
| 29 | 0B020035X000 | Velcro:15-needle | |
| 29 | 050320470010 | Damper ring :3mm dia. e | |
| 29 | 0222002@000 | Cover:harness | |
| 29 | 505108020000 | Stud:no.1:m8-82 | |
| 30 | 0P1200020000 | Traverse scale | |
| 30 | 0F4230410000 | Base:y motor | |
| 30 | 0B020036@S00 | Upper thread holder[s] | |
| 30 | 0B020033XS00 | Upper thread holder: 15-needle[s] | |
| 30 | 080290020010 | Base:bearing | |
| 30 | 64450162@000 | Universal bushing : kg-010 | |
| 30 | 080230060000 | Arm: take-up lever | |
| 30 | 611100050000 | E-ring : 2mm dia. | |
| 31 | 0B020036@000 | Upper thread holder | |
| 31 | 513403020000 | Screw with pin: no.4:m3-12.5 | |
| 31 | 050321470S10 | Picker[s] | |
| 31 | 0F4230120020 | Bracket:20mm dia. shaft guide | |
| 31 | 0B020033X000 | Upper thread holder : 15-needle | |
| 32 | 515103010020 | Roller:3mm dia. | |
| 32 | 050321490000 | Holder:picker | |
| 32 | 0C0230090010 | Sensor arm | |
| 32 | S530041601SD | Truss head tapping screw :4p*16 | |
| 32 | 502503070010 | Collar:no.1:3mm dia. | |
| 33 | 0F4230130000 | Guide:15mm dia. shaft | |
| 33 | 09051001X090 | Face cover: needle bar case: 15-needle | |
| 33 | 09051001@060 | Face cover:needle bar case | |
| 33 | 080290270000 | Lid: take-up lever shaft holder: 15.3mm dia. | |
| 33 | 050320700000 | Stopper:picker | |
| 34 | 507802060000 | Plate spring: rotary hook cover : t0.3 | |
| 34 | 08027005@A10 | Upper thread lock[a] | |
| 34 | 509508080000 | Bearing bushing: no.1:8mm dia. | |
| 35 | 08027005@000 | Base:upper thread lock | |
| 35 | 503101100000 | Straight pin : no.1:3mm dia. | |
| 36 | 080270030S10 | Lock shaft[s] | |
| 36 | 050330680S00 | Rotary hook cover[s] | |
| 37 | 507603040030 | Compression spring :0.3mm dia. | |
| 37 | 050330670000 | Cover : needle plate bracket | |
| 38 | 611100040000 | E-ring:1.5mm dia. | |
| 38 | 05034055@010 | Needle plate | |
| 39 | S125040801MZ | Hexagon socket head countersunk screw:m4*8 | |
| 39 | 512153150000 | Stepped screw : no.1 :9/64 8.8 | |
| 40 | 070110@@@S10 | Base:change roller[s] | |
| 40 | 050330690000 | Cover:cylinder bed: front | |
| 41 | 050330350010 | Cover:cylinder bed | |
| 41 | 514105030S20 | Screw with roller pin:no.1:m5[s] | |
| 42 | QQ4@020@0000 | R. h. base connecting shaft: 15mm dia. | |
| 43 | 504715010000 | N-coupling :n-15-15 |
Tension Base47 parts · 3 in shop
| 8 | 0C0220080000 | Spring hook ×1 | $ 5.49 → |
| 26 | 0J2602300A20 | Tc sensor[a] ×1 | $ 42.29 → |
| 28 | 0J2602100010 | Card:tc sensor ×1 | $ 21.49 → |
| 1 | UC29@0000040 | Tension base: rotary : tfmx ×1 | |
| 1 | UC29@0000140 | Tension base:rotary:tfmx: guard b ×1 | |
| 2 | 0C012002@S60 | Tension base:rotary[s] ×1 | |
| 3 | 0C0230120010 | Rotary tension disk ×1 | |
| 4 | 0C0230130030 | Shaft:rotary tension disk ×1 | |
| 5 | 0C0230190S20 | Base:rotary tension disk[s] ×1 | |
| 6 | 0J4203800000 | Slit plate:rotary disk:50 ×1 | |
| 7 | 0C0220150000 | Knob:thread tension:a ×1 | |
| 9 | 507706010000 | Taper spring :0.6mm dia. ×1 | |
| 10 | 0C0210060000 | Tension disk ×1 | |
| 11 | 0C0210040000 | Thread tension stud:with groove ×1 | |
| 12 | 509804050000 | Screw bushing : no.2:m4 ×1 | |
| 13 | 0C0220339000 | Base:thread presser : u :09-needle ×1 | |
| 13 | 0C022037X000 | Base:thread presser:u:15-needle ×1 | |
| 13 | 0C0220316000 | Base:thread presser:u:06-needle ×1 | |
| 13 | 0C022035Y000 | Base:thread presser:u:12-needle ×1 | |
| 14 | 0C0220326000 | Base:thread presser :d :06-needle ×1 | |
| 14 | 0C0220349000 | Base:thread presser :d :09-needle ×1 | |
| 14 | 0C022036Y000 | Base:thread presser :d :12-needle ×1 | |
| 14 | 0C022038X000 | Base:thread presser :d :15-needle ×1 | |
| 15 | 550031001SD | Countersunk tapping screw:3p*10 ×1 | |
| 16 | S132030401TD | Truss head screw: stepped:m3*4*2 ×1 | |
| 17 | 507602010000 | Compression spring :0.2mm dia. ×1 | |
| 18 | 0C0220400000 | Thread presser ×1 | |
| 19 | 0C022017@020 | Upper thread guide:tension base ×1 | |
| 20 | 550030801SD | Countersunk tapping screw :3p*8 ×1 | |
| 21 | 0C0250050000 | Lamp cover: tension base ×1 | |
| 22 | 0J2601900030 | Card:tension base ×1 | |
| 23 | 507803050000 | Plate spring:t0.3 ×1 | |
| 24 | 0C015002@000 | Cover:tension base ×1 | |
| 24 | 0C015007@S00 | Cover: tension base[s] ×1 | |
| 25 | 0C023014@000 | Rail thread breakage sensor ×1 | |
| 27 | 0C0230220010 | Bracket :tc sensor card ×1 | |
| 29 | S530030601SD | Truss head tapping screw:3p*6 ×1 | |
| 30 | 0C023020@010 | Disk guard:a ×1 | |
| 31 | 0C023016@000 | Disk guard:b ×1 | |
| 31 | 0C023025@000 | Disk guard:c ×1 | |
| 32 | 644500150000 | Coated clip:5 ×1 | |
| 33 | 0C0250090010 | Grommet ×1 | |
| 34 | 0C024003LS00 | Bracket tension base:l[s] ×1 | |
| 35 | 0C024003RS00 | Bracket:tension base :r[s] ×1 | |
| 36 | 0J1501100020 | Bushing: harness ×1 | |
| 37 | 0C054019@000 | Tension base cord cover:a ×1 | |
| 37 | 0C054020@000 | Tension base cord cover :b ×1 |
Main Shaft Drive System36 parts · 2 in shop
| 3 | 501440030000 | Timing pulley : w20-16 | $ 39.29 → |
| 8 | 623300210000 | Timing belt :sptg:w20-s5m1270/g ×4H, 6H, 8H360P | $ 68.99 → |
| 1 | 0J6300800000 | Servo motor :200w ×2H | |
| 1 | 0J6300900000 | Servo motor :400w | |
| 2 | 03015017@000 | Cover: main motor | |
| 3 | 501430150S00 | Timing pulley: main shaft:w15-16[s] ×2H | |
| 4 | 501902020000 | Flat pulley : 45mm dia. | |
| 4 | 501901010030 | Flat pulley : 40mm dia. ×2H | |
| 5 | 630200050000 | Bearing:6000zz | |
| 6 | 514308050000 | Screw with roller pin:no.3:m8 | |
| 7 | 611100100000 | E-ring:7mm dia. | |
| 8 | 623200230000 | Timing belt:sptg:w15-s5m1195/g ×2H | |
| 8 | 623300190000 | Timing belt:sptg:w20-s5m1350/g ×8H500P | |
| 9 | 50143303B000 | Timing pulley :b:w15-40 ×2H | |
| 9 | 50144601B000 | Timing pulley :b:w20-60 | |
| 10 | 502715040010 | Bearing collar : 15mm dia. | |
| 11 | 508220060S00 | Bearing case : no.2: 20mm dia. [s] | |
| 12 | 040420210010 | Base: angle indicator ×2H | |
| 13 | 040420230010 | Angle indicator | |
| 14 | 508222020500 | Bearing case : no.2:22mm dia. [s] | |
| 15 | 502718010010 | Bearing collar: 18mm dia. | |
| 16 | 50143303A000 | Timing pulley : a:w15-40 ×2H | |
| 16 | 50144601A000 | Timing pulley : a:w20-60 | |
| 17 | 030490050000 | Lid:handle | |
| 18 | 644500050000 | Clamp:5n | |
| 19 | 030460050010 | Bracket:cover | |
| 20 | 17016008@000 | Shaft cover:360-500p | |
| 21 | 040360030010 | Base:sensor with spacer | |
| 22 | 030460130010 | Bracket shaft cover :b | |
| 23 | 040360020010 | Bracket :sensor | |
| 24 | 0J4204500000 | Card:photo-interrupter | |
| 25 | 040130080010 | Base shaft : rotary hook: 15p*343 ×360P | |
| 25 | 040130090000 | Base shaft : rotary hook: 15p*480 ×500P | |
| 26 | 040360050S10 | Rotating detecting plate[s] | |
| 27 | 040410070010 | Pointer ×2H | |
| 27 | 040410100010 | Pointer |
Cylinder Bed43 parts · 1 in shop
| 14 | 050260010020 | Bobbin regular rotary hook | $ 11.09 → |
| 1 | 050120090S00 | Cylinder bed[s] | |
| 2 | 050310110000 | Rotary hook base stud | |
| 3 | 502715080000 | Bearing collar: 15mm dia. | |
| 4 | 506528030000 | Spiral bevel gear: no.1:28t | |
| 5 | 506514030000 | Spiral bevel gear: no.1:14t | |
| 6 | 519108030000 | Plain washer:7.94*19*t0.8 | |
| 7 | 502107020000 | Stopper collar:7.94mm dia. | |
| 8 | 050330430000 | Shaft:rotary hook :7.94mm dia. | |
| 9 | 050330640S00 | Needle plate bracket[s] | |
| 10 | 611400080000 | Spring pin :3*12 | |
| 11 | 050330660000 | Rotary hook support | |
| 12 | 050230090010 | Rotary hook: khs12-ryptfsoe | |
| 13 | 050290020000 | Rotary hook set screw:11/64*7.2 | |
| 15 | 050240150000 | Bobbin case: regular rotary hook:standard | |
| 16 | 050321510S00 | Lever shaft:knife[s] | |
| 17 | 611100070000 | E-ring:4mm dia. | |
| 18 | 050320930010 | Thread separating plate: direct movement 2-blade type | |
| 19 | 050320920010 | Movable knife: direct movement 2-blade type | |
| 20 | 050321520000 | Fixed knife: direct movement 2-blade type | |
| 21 | 050321530000 | Under thread presser | |
| 22 | 050321540S00 | Connecting plate:knife[s] | |
| 23 | 050320850S20 | Lever shaft: knife connecting plate[s] | |
| 24 | 050321000000 | Lever knife connecting plate shaft | |
| 25 | 050321450A00 | Base:solenoid[a] | |
| 26 | 050321560000 | Rubber packing | |
| 27 | 644100040000 | Cord clamp | |
| 28 | 512130010010 | Stepped screw : no.1:m2.5*6 | |
| 29 | 050321480000 | Connecting plate: picker | |
| 30 | 611100050000 | E-ring : 2mm dia. | |
| 31 | 050321470S10 | Picker[s] | |
| 32 | 050321490000 | Holder:picker | |
| 33 | 050320700000 | Stopper:picker | |
| 34 | 507802060000 | Plate spring: rotary hook cover : t0.3 | |
| 35 | 503101100000 | Straight pin : no.1:3mm dia. | |
| 36 | 050330680S00 | Rotary hook cover[s] | |
| 37 | 050330670000 | Cover : needle plate bracket | |
| 38 | 05034055@010 | Needle plate | |
| 39 | S125040801MZ | Hexagon socket head countersunk screw:m4*8 | |
| 40 | 050330690000 | Cover:cylinder bed: front | |
| 41 | 050330350010 | Cover:cylinder bed | |
| 42 | QQ4@020@0000 | R. h. base connecting shaft: 15mm dia. | |
| 43 | 504715010000 | N-coupling :n-15-15 |
Color Change System A19 parts · 1 in shop
| 11 | 640900010001 | Potentiometer ×1 | $ 132.99 → |
| 1 | 070120430010 | Cover:change ×1 | |
| 2 | 070120440S20 | Base:change motor[s] ×1 | |
| 3 | 070120450S30 | Bearing case : change[s] ×1 | |
| 4 | 0C0230210000 | Sensor arm ×1 | |
| 5 | 070120480010 | Reinforcing plate:change motor base ×1 | |
| 6 | 070120420010 | Base:change ×1 | |
| 7 | 0J6110600000 | Pulse motor:56mm square:double-end ×1 | |
| 8 | 070120130000 | Shaft:change cam ×1 | |
| 9 | 080520018010 | Knob:b ×1 | |
| 10 | 080290040S10 | Roller pin[s] ×1 | |
| 12 | 0C0420020010 | Bracket:potentiometer ×1 | |
| 13 | 506120040020 | Spur gear :20t ×1 | |
| 14 | 506140060020 | Spur gear :40t ×1 | |
| 15 | 070110090000 | Cam:change ×1 | |
| 16 | 505404030020 | Stud:no.4:m4-27.5 ×1 | |
| 17 | 502112050000 | Stopper collar: 12mm dia. ×1 | |
| 18 | 519208040000 | Plastic washer :6.2*9.5*t0.5 ×1 | |
| 19 | 519214010000 | Plastic washer: 12.2*18*t0.5 ×1 |
X-axis Drive System 132 parts · 1 in shop
| 0J4204400000 | Card: magnetic sensor a | $ 26.49 → | |
| 0F4110140S30 | Z-spec. frame :0002/500s[s] | ||
| 503201010010 | Stepped pin:no.1 | ||
| 0F4160470010 | Reinforcing plate: belt catcher plate | ||
| 0P1200020000 | Traverse scale | ||
| 623C00020000 | Timing belt : ma5:w30-263e/ly | ||
| 623C00010000 | Timing belt : ma5:w30-207e/ly | ||
| 631200210000 | Bearing:628zz | ||
| 611100060000 | E-ring:3mm dia. | ||
| 630200330000 | Bearing:r1340zz | ||
| 502705010000 | Bearing collar :5mm dia. | ||
| 660300@@0000 | Linear way | ||
| 519212030000 | Plastic washer: 10.2*15*t0.5 | ||
| 518102@@0000 | Rail plate :0.5*10 | ||
| 503201020000 | Stepped pin:no.1 | ||
| 501463010S00 | Timing pulley : w30-16[s] | ||
| 0F4110@@0S20 | Z-spec. frame[s] | ||
| 0F4160420000 | Base: tension | ||
| 0F4160410000 | Plate:tension base | ||
| 0F4160380000 | Base:belt catcher | ||
| 0F4160370000 | Belt catcher :x | ||
| 0F4160350000 | Holder: timing pulley | ||
| 0F416034R000 | Bracket:z-spec. frame drive base :r | ||
| 0F416034L000 | Bracket:z-spec. frame drive base:l | ||
| 0F4160450000 | Base: roller pin | ||
| 0F4140060S00 | Sensor plate:no.1[s] | ||
| 0F41201@0S20 | Slide base[s] | ||
| 0F4120@@0S10 | Slide base[s] | ||
| 0F41102@0000 | Cover:z-spec. frame | ||
| 0F4110340000 | Cover:z-spec. frame :0002/360s | ||
| 0F41101@0S40 | Z-spec. frame[s] | ||
| 510200400010 | Spacer: no.2:t1.6 |
Cam Drive System26 parts · 1 in shop
| 0J4204400000 | Card:magnetic sensor a | $ 26.49 → | |
| 0E0110080010 | Base:ath | ||
| 0E0210400000 | Lever :ath cam | ||
| 502315020010 | Split collar: no.1:15mm dia. | ||
| 0E0210160010 | Cam:ath | ||
| 05032052@000 | Connecting plate: ath | ||
| 0E02600@0000 | Connecting plate: ath | ||
| 502541010000 | Collar:no.1:4.1mm dia. | ||
| 0E0210680S10 | Magnet pin[s] | ||
| 0E0210170000 | Connecting plate:ath arm | ||
| 612200060000 | O-ring:p-8 | ||
| 514405020S00 | Roller pin[s] | ||
| 0E0210500000 | Lever:ath cam/jumbo rotary hook | ||
| 0E0210420000 | Armath connecting plate | ||
| 51911401@000 | Plain washer: 12.5*22*t0.1-1 | ||
| 513106010010 | Screw with pin : no.4:m6-36 | ||
| 503101190010 | Straight pin:no.1:8mm dia. | ||
| 519210010000 | Plastic washer:8.2*12*t0.5 | ||
| 502408020010 | Split collar: no.2:8mm dia. | ||
| 0E0210630000 | Bracket retractable sensor | ||
| 0E0210540000 | Stopper:ath connecting plate arm | ||
| 514131010S10 | Screw with roller pin :no.1[s] | ||
| 0E0210570000 | Lever:ath solenoid | ||
| 0E0210450010 | Bracket:ath solenoid | ||
| 640600090011 | Solenoid : rotary | ||
| 502115030000 | Stopper collar: 15mm dia. |
Arm 338 parts · 1 in shop
| 634400070001 | Needle cage: kt404310ne01b2 | $ 31.99 → | |
| 502221010010 | Tightening collar:21mm dia. | ||
| 512104160020 | Stepped screw : no.1:m4*5.3 | ||
| 080240120010 | Wick:2.5*1*22 | ||
| 502108020010 | Stopper collar : 8mm dia. | ||
| 502108050010 | Stopper collar:8mm dia. | ||
| 080230010000 | Connecting rod :26 | ||
| U8K000000100 | Leverdrive:presser foot :45 | ||
| 080230140S50 | Lever:presser foot[s] | ||
| 519104060000 | Plain washer:4*7.5*t0.8 | ||
| 515105020010 | Roller : 5*8*5 | ||
| 513354020A10 | Screw with pin:no.3 :11/64-7.7[a] | ||
| 514454020S00 | Screw with roller pin: no.4:11/64e[s] | ||
| 514454020000 | Screw with roller pin :no.4:11/64e | ||
| 503204030S00 | Stepped pin :no.4[s] | ||
| 503204030020 | Stepped pin :no.4 | ||
| 519108050000 | Plain washer:8*15*t0.5 | ||
| QQ4@010@0000 | Main shaft: 18mm dia. | ||
| 513354020010 | Screw with pin : no.3 :11/64-7.7 | ||
| 080230210000 | Connecting rod | ||
| 508222010500 | Bearing case : no.2:22mm dia. [s] | ||
| 080220180000 | Washer: cam | ||
| 630200040000 | Bearing:60/22zz | ||
| 080220010000 | Cam:needle bar | ||
| 080220040000 | Connecting rod :51.7 | ||
| 080220400000 | Base:take-up lever cam | ||
| 080220060010 | Cam: take-up lever: regular rotary hook | ||
| 080220070010 | Cam:take-up lever: jumbo rotary hook | ||
| 502521010000 | Collar:no.1:21mm dia. | ||
| 080240140000 | Wick:3.5*1*34 | ||
| 080220021A20 | Cam:presser foot[a] | ||
| 503204070S10 | Stepped pin :no.4[s] | ||
| 503204070010 | Stepped pin :no.4 | ||
| 080240230000 | Wick:3p*61 | ||
| 080230050S10 | Leverneedle bar[s] | ||
| 512206010S10 | Stepped screw : no.2 :m6*13[s] | ||
| 512206010010 | Stepped screw:no.2:m6*13 | ||
| 504718010000 | N-coupling :n-18-18 |
H, J, K, L43 parts
| S130062201SD | M6*22 | ||
| SA71800451CN | 1/4*40*4.5 | ||
| SA71750351CN | 11/64*40*3.5 | ||
| SA71750401CN | 11/64*40*4 | ||
| SA71750501CN | 11/64*40*5 | ||
| SA71790501CN | 15/64*28*5 | ||
| SA71791001CN | 15/64*28*10 | ||
| SA71791501CN | 15/64*28*15 | ||
| SA71791701CN | 15/64*28*17 | ||
| SA71800401CN | 1/4*40*4 | ||
| SA71800501CN | 1/4*40*5 | ||
| SA71740601CN | 9/64*40*6 | ||
| SA71800601CN | 1/4*40*6 | ||
| SA71800801CN | 1/4*40*8 | ||
| SA71811201CN | 9/32*28*12 | ||
| S171050601TN | M5*6 | ||
| S171030601SD | M3*6 | ||
| SA70730251CN | 1/8*44*2.5 | ||
| SA70730301CN | 1/8*44*3 | ||
| SA70750901CN | 11/64*28*9 | ||
| SA71750251CN | 11/64*40*2.5 | ||
| SA71730351CN | 1/8*44*3.5 | ||
| S130062501SD | M6*25 | ||
| S130050502MZ | M5*5 | ||
| S130063501SD | M6*35 | ||
| S130064001SD | M6*40 | ||
| S130031501SD | M3*15 | ||
| S130043501SD | M4*35 | ||
| S130020201SD | M2*2 | ||
| S130470501SD | M2.5*5 | ||
| S130052002MZ | M5*20 | ||
| S130054501SE | M5*45 | ||
| S130054001SD | M5*40 | ||
| S162031001MZ | M3*10 | ||
| S130030801MZ | M3*8 | ||
| S130052201SD | M5*22 | ||
| S130041802MZ | M4*18 | ||
| S130055501SD | M5*55 | ||
| S130041202SD | M4*12 jis | ||
| S162020301MZ | M2*3 | ||
| S162030801SD | M3*8 | ||
| S162030802SE | M3*8 | ||
| SA70750401CN | 11/64*40*4 |
E, F, G, H46 parts
| S150040501SD | M4*5 | ||
| SA53740701CL | 9/64*40*7 | ||
| S150087001TN | M8*70 | ||
| S150061801SD | M6*18 | ||
| S150052501SD | M5*25 | ||
| SA53730601CL | 1/8*44*6 | ||
| SA53740301CL | 9/64*40*3 | ||
| SA53740351CL | 9/64*40*3.5 | ||
| SA53740401CL | 9/64*40*4 | ||
| SA53740601CL | 9/64*40*6 | ||
| SA53740951CL | 9/64*40*9.5 | ||
| S150063501SD | M6*35 | ||
| SA53741201CL | 9/64*40*12 | ||
| SA53740681CL | 9/64*40*6.8 | ||
| SA30730701CL | 1/8*44*7 | ||
| SA30740301CL | 9/64*40*3.5 | ||
| SA30740401CL | 9/64*40*4 | ||
| SA31740401CM | 9/64*40*4 | ||
| SA30740601CL | 9/64*40*6 | ||
| SA30740801CL | 9/64*40*8 | ||
| S130470301MZ | M2.5*3 | ||
| S150081201SD | M8*12 | ||
| S150061503SD | M6*15 | ||
| S150040602MZ | M4*6 | ||
| S150042201SD | M4*22 | ||
| S150040601SD | M4*6 | ||
| S150040801MZ | M4*8 | ||
| S150040802SD | M4*8 | ||
| S150041001MZ | M4*10 | ||
| S150041002SD | M4*10 | ||
| S150041201SD | M4*12 | ||
| S150041401SD | M4*14 | ||
| S150041501SD | M4*15 | ||
| S150042001SD | M4*20 | ||
| S150042501SD | M4*25 | ||
| S150061502SC | M6*15 | ||
| S150050601SD | M5*6 | ||
| S150050801SD | M5*8 | ||
| S150051001MZ | M5*10 | ||
| S150051002SD | M5*10 | ||
| S150051201SD | M5*12 | ||
| S150051501SD | M5*15 | ||
| S150053001SD | M5*30 | ||
| S150053501SD | M5*35 | ||
| S150054001SD | M5*40 | ||
| S130470302SD | M2.5*3 |
C, D, E50 parts
| S160020401MZ | M2*4 | ||
| S160040401SD | M4*4 | ||
| S160031401SA | M3*14 | ||
| S160031402SD | M3*14 | ||
| S160031501SD | M3*15 | ||
| S160031601SD | M3*16 | ||
| S160031801SD | M3*18 | ||
| S160032001SD | M3*20 | ||
| S160033001SD | M3*30 | ||
| S160034002SD | M3*40 | ||
| S160035001SD | M3*50 half threads | ||
| S160040501SD | M4*5 | ||
| S160031201MZ | M3*12 | ||
| S160040601MZ | M4*6 | ||
| S160040602SD | M4*6 | ||
| S160040801SD | M4*8 | ||
| S160041001SD | M4*10 | ||
| S160041201SD | M4*12 | ||
| S160041501SD | M4*15 | ||
| S160041801SD | M4*18 | ||
| S160043001SD | M4*30 | ||
| S160045001SD | M4*50 | ||
| S160046001SD | M4*60 | ||
| S160031202SD | M3*12 | ||
| S160031101SC | M3*11 half threads | ||
| S160020801MZ | M2*8 | ||
| S160030401MZ | M3*4 | ||
| S160470301MZ | M2.5*3 | ||
| S160470402MZ | M2.5*4 | ||
| S160470501MZ | M2.5*5 | ||
| S160470801MZ | M2.5*8 | ||
| S160471301MZ | M2.5*13 | ||
| S160471302SD | M2.5*13 | ||
| S160480601SD | M2.6*6 | ||
| S160030301MZ | M3*3 | ||
| S160030302SD | M3*3 | ||
| S160030403CD | M3*4 | ||
| S160030402SD | M3*4 | ||
| S160031002SD | M3*10 | ||
| S160030501MZ | M3*5 | ||
| S160030502SD | M3*5 | ||
| S160030601MZ | M3*6 | ||
| S160030603SA | M3*6 | ||
| S160030602SD | M3*6 | ||
| S160030801MZ | M3*8 | ||
| S160030803SA | M3*8 | ||
| S160030802SD | M3*8 | ||
| S160031001MZ | M3*10 | ||
| S160031003SC | M3*10 half threads | ||
| S160050601SD | M5*6 |
B, C48 parts
| S120102001TN | M10*20 | ||
| S120081202TD | M8*12 | ||
| S120044003TN | M4*40 half threads | ||
| S120030605TD | M3*6 low head | ||
| S120042202TD | M4*22 | ||
| S120062502TD | M6*25 | ||
| S120045501TN | M4*55 half threads | ||
| S120123001TD | M12*30 | ||
| S120034001TN | M3*40 | ||
| S120035001TN | M3*50 | ||
| S120470502TD | M2.5*5 | ||
| S120042201TN | M4*22 | ||
| S120062002TD | M6*20 | ||
| S120041802TD | M4*18 | ||
| S120041602TD | M4*16 | ||
| S121030601SD | M3*6 | ||
| S121040801SD | M4*8 | ||
| S121042501SD | M4*25 | ||
| S121051001SD | M5*10 | ||
| S121051502SC | M5*15 | ||
| S121051501SD | M5*15 | ||
| S121052001SD | M5*20 | ||
| S120043503TD | M4*35 half threads | ||
| S120086002TD | M8*60 | ||
| S120102501TN | M10*25 | ||
| S120051504TN | M5*15 low head | ||
| S120103001TN | M10*30 | ||
| S120103501TN | M10*35 | ||
| S120104001TN | M10*40 | ||
| S120123001TN | M12*30 | ||
| S120123501TN | M12*35 | ||
| S120081801TN | M8*18 | ||
| S120470501TN | M2.5*5 | ||
| S120052502TD | M5*25 | ||
| S120030302TD | M3*3 | ||
| S120031801TD | M3*18 | ||
| S120082001TD | M8*20 | ||
| S120052801TN | M5*28 | ||
| S120044502TN | M4*45 half threads | ||
| S120081501TD | M8*15 | ||
| S120051802TD | M5*18 | ||
| S120470401TN | M2.5*4 | ||
| S120033003SD | M3*30 | ||
| S120030402TD | M3*4 | ||
| S120033002TN | M3*30 | ||
| S120067502TN | M6*75 | ||
| S120050501TN | M5*5 | ||
| S121061501SC | M6*15 |
Auxiliary Drive System В26 parts
| 1 | 0F4320150000 | Bracket: auxiliary drive base ×1 | |
| 1 | 0F4320190000 | Base: auxiliary drive ×1 | |
| 2 | 508315010S00 | Bearing case : no.3:15mm dia. [s] ×1 | |
| 3 | 502815010000 | Needle collar:15mm dia. ×1 | |
| 4 | 501452070S10 | Timing pulley:w25-16[s] ×1 | |
| 5 | 0F4320200000 | Auxiliary drive ×1 | |
| 6 | 66030005A000 | Linear way:a:zlwl-1518c2r580 ×1 | |
| 7 | 0F4320250000 | Auxiliary drive arm ×1 | |
| 8 | 0F4320170000 | Bracket:auxiliary drive arm ×1 | |
| 9 | 0F4320260000 | Belt catcher : no.1 ×1 | |
| 10 | 0F4320270000 | Belt catcher:no.2 ×1 | |
| 11 | 623B00030000 | Timing belt : ma5:w25-310e/ly ×1 | |
| 12 | 501452040S10 | Timing pulley :w25-16[s] ×1 | |
| 13 | 634100060000 | Needle bearing :hk-1010 ×1 | |
| 14 | 519212030000 | Plastic washer: 10.2*15*t0.5 ×1 | |
| 15 | 503201040000 | Stepped pin:no.1 ×1 | |
| 16 | 611100100000 | E-ring:7mm dia. ×1 | |
| 17 | 501903030000 | Flat pulley : 50mm dia. ×1 | |
| 18 | 503104020010 | Straight pin : no.4:10mm dia. ×1 | |
| 19 | 0F4320240000 | Guide plate: holder ×1 | |
| 20 | 0F4210010010 | Holder: timing pulley ×1 | |
| 21 | 0F4320210000 | Cover: slide rail ×1 | |
| 22 | 0F4320220000 | Cover: auxiliary drive ×1 | |
| 23 | 0F4320230000 | Stay: auxiliary drive ×1 | |
| 24 | 0F4320030000 | Cover: timing belt ×1 | |
| 25 | 0F4320280000 | Shaft: auxiliary drive system pulley ×1 |
Auxiliary Drive System A18 parts
| 1 | 0F4310050010 | Bracket:bearing case ×1 | |
| 2 | 508315010S00 | Bearing case: no.3:15mm dia.[s] ×1 | |
| 3 | 502815010000 | Needle collar: 15mm dia. ×1 | |
| 4 | 0F4310120010 | Spiral pulley : 25mm dia. ×1 | |
| 5 | 0F4310150000 | Cover: auxiliary drive base ×1 | |
| 6 | 0F4310161510 | Auxiliary drive base:a/ges[s] ×1 | |
| 7 | 661100090010 | Slide rail : 330lmm2205 ×1 | |
| 8 | 0F4310090000 | Cover slide rail ×1 | |
| 9 | 0F4310170000 | Auxiliary drive arm ×1 | |
| 10 | 0F4310100S20 | Wire auxiliary drive[s] ×1 | |
| 11 | 501DB3020000 | R pulley:30.2mm dia. ×1 | |
| 12 | 631200090000 | Bearing:608zz ×1 | |
| 13 | 519104040000 | Plain washer :4*12*t2 ×1 | |
| 14 | 0F4310030010 | Stepped pin:pulley ×1 | |
| 15 | 502541030010 | Collar:no.1:4.1mm dia. ×1 | |
| 16 | 0F4310070010 | Boss ×1 | |
| 17 | 0F4310020000 | Cover:r-pulley ×1 | |
| 18 | 0F4310140000 | Bracket: auxiliary drive base ×1 |
Arm 234 parts
| 080210360A70 | Needle bar reciprocator:gn[a] | ||
| 0L0210030S00 | Needle bar drive shaft : automatic lubrication[s] | ||
| 080290270000 | Lid: take-up lever shaft holder: 15.3mm dia. | ||
| 515103010020 | Roller:3mm dia. | ||
| 513403020000 | Screw with pin: no.4:m3-12.5 | ||
| 080230060000 | Arm: take-up lever | ||
| 519104060000 | Plain washer :4*7.5*t0.8 | ||
| 515121050020 | Roller :4.7*7.94*4 | ||
| 512104180000 | Stepped screw : no.1:m412.2* | ||
| 080230020000 | Lever: take-up lever | ||
| 503101130000 | Straight pin :no.1:8mm dia. | ||
| 080240130000 | Felt:needle bar drive shaft | ||
| 080250170S20 | Guide: needle bar case[s] | ||
| 080240070000 | Felt:needle bar drive shaft :b | ||
| 080240020010 | Wick:3.5p*183 | ||
| 0L0210030000 | Needle bar drive shaft: automatic lubrication | ||
| 080210180S20 | Damper bracket:presser foot reciprocator[s] | ||
| 507307010010 | Torsion spring :0.7mm dia. | ||
| 513354060A20 | Screw with pin : no.3 :11/64-7.9[a] | ||
| 080210110010 | Holder: jump spring | ||
| 080210270S40 | Needle bar reciprocator[s] | ||
| 519112010000 | Plain washer: 10.3*14*t0.5 | ||
| 080210410040 | Reciprocating slide block | ||
| 509472050010 | Plastic bushing: no.2:7.24mm dia. | ||
| 080210090000 | Damper bracket: needle bar reciprocator | ||
| 513354060020 | Screw with pin: no.3:11/64-7.9 | ||
| 080210420S10 | Presser foot reciprocator :47mm st[s] | ||
| 080240120010 | Wick:2.5*1*22 | ||
| 51910604@020 | Plain washer:6*9.5*10.05-0.5 | ||
| 511153010010 | Flat fillister head screw :9/64*4 | ||
| 080240060000 | Felt:14mm dia. | ||
| 080240220000 | Felt:14mm dia. | ||
| 080210420A20 | Presser foot reciprocator:47mm st[a] | ||
| 509508080000 | Bearing bushing: no.1:8mm dia. |
Upper Thread Holder16 parts
| 0B0110650S10 | Hook[s] | ||
| 0J6110700T10 | Pulse motor :42mm square :double-end[t] | ||
| 0B0110420000 | Base: hook motor | ||
| 502522010010 | Collar:spring guide | ||
| 080320410000 | Damper ring : 4mm dia. | ||
| 507308190010 | Torsion spring :0.8mm dia. | ||
| 0B0110470000 | Lever: hook | ||
| 0B0110080010 | Connecting plate: hook | ||
| 0B0110510000 | Slide: hook | ||
| 519204010000 | Washer:2.6*7*t0.5 | ||
| 0B0110520020 | Guide: hook | ||
| 0B0120050000 | Cover:hook | ||
| 512153020000 | Stepped screw:no.1:9/6410* | ||
| 512153040000 | Stepped screw : no.1:9/64*7.5 | ||
| 0B0110370010 | Spacer: slide hook | ||
| 512104100040 | Stepped screw:no.1:m4*6.7 |
Gear Box10 parts
| 1 | 040130100S20 | Gear box:regular rotary hook[s] | |
| 1 | 04013010JS20 | Gear box:jumbo rotary hook[s] | |
| 2 | 506132030000 | Spur gear :32t | |
| 3 | 506132020S00 | Spur gear:32t[s] | |
| 4 | 040130020010 | Base shaft : rotary hook | |
| 5 | S301041501SD | Plain washer :4*15*t2.0 | |
| 6 | 502110070000 | Stopper collar: 10mm dia. | |
| 7 | 502715080000 | Bearing collar : 15mm dia. | |
| 8 | 519212030000 | Plastic washer: 10.2*15*t0.5 | |
| 9 | 51030006@000 | Spacer:no.3:t0.1-1 |
Table33 parts
| 1 | 2Q4@@@@40000 | Table ×1 | |
| 2 | S550031202SD | Countersunk tapping screw:3p*12 ×1 | |
| 3 | 134250050000 | Cover:y motor ×1 | |
| 3 | 02230420000 | Cover:y motor :a/ges ×1 | |
| 3 | 13425006A000 | Cover:y motor :a ×1 | |
| 3 | 13425006B000 | Cover:y motor :b ×1 | |
| 4 | 13425006C000 | Cover:y motor : c ×1 | |
| 5 | 134290070000 | Table cover :ath box ×1 | |
| 6 | 15121005L050 | Table support : no.12:l ×1 | |
| 7 | 15121005R050 | Table support : no.12:r ×1 | |
| 8 | S530041801SD | Truss head tapping screw : 4p*18 ×1 | |
| 9 | 15213013L000 | Table holder:l ×1 | |
| 10 | 15213013R000 | Table holder:r ×1 | |
| 11 | 15121007L000 | Brackettable support:l ×1 | |
| 12 | 15121007R000 | Bracket: table support :r ×1 | |
| 13 | 152140100020 | Joint: table ×1 | |
| 14 | 15121002L050 | Table support : no.12:l ×1 | |
| 15 | 15121002R050 | Table support : no.12:r ×1 | |
| 16 | 15121004L050 | Table support:no.12 ×1 | |
| 17 | 505108160000 | Stud:no.1:m8*35 ×1 | |
| 18 | 030390160010 | Base: table stay ×1 | |
| 19 | 550042001SD | Countersunk tapping screw :4p*20 ×1 | |
| 20 | 030390170010 | Bracket: table stay ×1 | |
| 21 | S180061001SD | Wing bolt:m6*l10 ×1 | |
| 22 | 030540020S10 | Stay: table[s] ×1 | |
| 23 | 030540010000 | Holder:table stay ×1 | |
| 24 | 180062001SD | Wing bolt:m6*l20 ×1 | |
| 25 | 030620030020 | Stopper table ×1 | |
| 26 | 615500030001 | Toggle clamp:gy1001 ×1 | |
| 27 | 152130050000 | Table aligning plate ×1 | |
| 28 | 030790040000 | Felt:lid holder ×1 | |
| 29 | 505108020000 | Stud:no.1:m8-82 ×1 | |
| 30 | 0P1200020000 | Traverse scale ×1 |
Framing38 parts
| 1 | MQ4@@@@@@A10 | Stand[a] ×1 | |
| 2 | 030430760000 | Cover: right-side box ×1 | |
| 3 | 030430770000 | Cover:left-side box ×1 | |
| 4 | 03041073L010 | Stand front face cover:l:360p ×1 | |
| 4 | 03041074L010 | Stand front face cover:l:500p ×1 | |
| 5 | 03041073R010 | Stand front face cover:r:360p ×1 | |
| 5 | 03041074R010 | Stand front face cover:r:500p ×1 | |
| 6 | 03041062@010 | Stand front face cover:360p ×1 | |
| 6 | 03041065@010 | Stand front face cover:500p ×1 | |
| 7 | 15213001@000 | Table holderstand front face cover ×1 | |
| 8 | 15213002C000 | Table holder : front:c ×1 | |
| 8 | 15213002D000 | Table holder: front:d ×1 | |
| 9 | 152130070060 | Stopper table: front ×1 | |
| 10 | 152130060010 | Stopper table: rear ×1 | |
| 11 | 0J1941800000 | Bracket:head card ×1 | |
| 12 | 030190262000 | Cover:y driver ×1 | |
| 13 | 03019025A000 | Box:y driver ×1 | |
| 14 | 505105200000 | Stud: no.1:m8-75 ×1 | |
| 15 | 1B5@@@01A000 | Wiring cover :a ×1 | |
| 16 | 1B5@@@018010 | Wiring cover :b ×1 | |
| 17 | 1B5@@@010010 | Wiring cover ×1 | |
| 18 | 030710110000 | Tajima brand name plate ×1 | |
| 19 | 14Q40@@@0030 | Main name plate:tfmx-2c ×1 | |
| 20 | 0J1502100010 | Cap:harness:30mm dia. ×1 | |
| 21 | 644500210000 | Grommet with film:26a ×1 | |
| 22 | 030190340050 | Base: card ×1 | |
| 23 | 614300250000 | Caster:j38nzb050s ×1 | |
| 23 | 614300230000 | Caster:65p*50mm wide ×1 | |
| 24 | 030530080000 | Leveling block ×1 | |
| 25 | 030530070000 | Leveling bolt:m12*90 ×1 | |
| 26 | 03052014@S00 | Vibration-preventive base[s] ×1 | |
| 27 | 03052004@S00 | Vibration-preventive base[s] ×1 | |
| 28 | 11045026C010 | Frame:stand ×1 | |
| 29 | 030440610010 | Cover : stand base ×1 | |
| 30 | 030530040000 | Leveling bolt:m12*50 ×1 | |
| 31 | 03052013@S00 | Vibration-preventive base[s] ×1 | |
| 31 | 03052009@S00 | Vibration-preventive base[s] ×1 | |
| 32 | 030510290S00 | Center support:no.1[s] ×1 |
N, P, R104 parts
| S213100002SD | M10 with flange | ||
| S402530001KC | Spring m3.5 | ||
| S402100001KC | Spring m10 | ||
| S402080002KD | Spring m8 | ||
| S402080001KC | Spring m8 | ||
| S402060002KD | Spring m6 | ||
| S402060001KC | Spring m6 | ||
| S402050003MZ | Spring m5 | ||
| S402050002KD | Spring m5 | ||
| S402050001KC | Spring m5 | ||
| S402040002KD | Spring m4 | ||
| S402040001KC | Spring m4 | ||
| S402030002KD | Spring m3 | ||
| S402120001KC | Spring m12 | ||
| S402030001KC | Spring m3 | ||
| S402480001KC | Spring m2.6 | ||
| S402020001KD | Spring m2 | ||
| S301163201SD | Plain m16*32*t2.5 | ||
| S301122051SC | Plain m12*20.5*t2 | ||
| S301102602SD | Plain m10*26*t3.2 | ||
| S301102601SC | Plain m10*26*t3.2 | ||
| S301102201SC | Plain m10*22*t1.6 | ||
| S301082201SC | Plain m8*22*t3.2 | ||
| S301081803SC | Plain m8*18*t3.2 | ||
| S402100002KD | Spring m10 | ||
| S305041101TP | Wave m4 | ||
| S301081801SC | Plain m8*18*t1.6 | ||
| S301470251SC | Plain m2.5*5*t0.5 | ||
| S301122601SD | Plain m12*26*t2.3 | ||
| S301051207EZ | Plain m5*12*t1.0 | ||
| S301040901EZ | Plain m4*9*t0.3 | ||
| S301041202SD | Plain m4*12*t1.0 | ||
| S304040852TP | With teeth m4 outward | ||
| S304060002SD | With teeth m6 | ||
| S301122601SC | Plain m12*26*t2.3 | ||
| S301061152SD | Plain m6*11.5*t0.8 | ||
| S304080001TP | With teeth m8 | ||
| S305101451TN | Wave m10 | ||
| S301470253SD | Plain m2.5*5*t0.5 | ||
| S305051001TN | Wave m5 | ||
| S305051101TN | Wave m5 | ||
| S301030604MZ | Plain m3*6*t0.5 | ||
| S301030605SD | Plain m3*6*t1.0 | ||
| S301470252MZ | Plain m2.5*5*t0.5 | ||
| S301041005EZ | Plain m4*10*t0.8 | ||
| S303040801SC | Disk spring m4 | ||
| S306080001SC | Slant m8 | ||
| S304051001TP | With teeth m5 | ||
| S304040851TP | With teeth m4 | ||
| S305061051TN | Wave m6 | ||
| S301081802SD | Plain m8*18*t1.6 | ||
| S301081601SD | Plain m8*16*t1.2 | ||
| S213100003SD | M10 with disk spring | ||
| SB10750601CN | 11/64*6*2.2 | ||
| S301480501XB | Plain m2.6*5*t0.5 | ||
| S301020431SD | Plain m2*4.3*t0.3 | ||
| S301020351XZ | Plain m2*3.5*t0.5 | ||
| S301410301MZ | Plain m1.4*3*t0.3 | ||
| SB10740605CN | 9/64*40*6*1.5 | ||
| SB10750702CN | 11/64*7*2.2 | ||
| S212200001SC | M20 type 3 | ||
| S217030001SD | M3 cap | ||
| S217060001SD | M6 cap | ||
| S212030003SD | M3 type 3 | ||
| SB12740601MZ | 9/64*6*2 type 3 | ||
| S301030602XZ | Plain m3*6*t0.3 | ||
| S211040001SD | M4 type 2 | ||
| SB12750701SC | 11/64*7*2.2 type 3 | ||
| S212470001SC | M2.5 type 3 | ||
| S210200001SC | M20 type 1 | ||
| S212160001SD | M16 type 3 | ||
| S212160002SC | M16 type 1 | ||
| S210160001SD | M16 type 1 | ||
| S212120002SD | M12 type 3 | ||
| S212120001SC | M12 type 3 | ||
| S210120001SC | M12 type 1 | ||
| S301480751XB | Plain m2.6*7.5*t0.5 | ||
| S301030603SC | Plain m3*6*t0.5 | ||
| S301061601SC | Plain m6*16*t1.0 | ||
| S301041003SD | Plain m4*10*t0.8 | ||
| S301061302SD | Plain m6*13*t1.0 | ||
| S301061301SC | Plain m6*13*t1.0 | ||
| S301061151SC | Plain m6*11.5*t0.8 | ||
| S301061102SC | Plain m6*11*t1.6 | ||
| S301051203SD | Plain m5*12*t0.8 | ||
| S301051202SC | Plain m5*12*t0.8 | ||
| S301051204MZ | Plain m5*12*t0.8 | ||
| S301051003SD | Plain m5*10*t0.8 | ||
| S301051002SC | Plain m5*10*t0.8 | ||
| S301041201SC | Plain m4*12*t1 | ||
| S301041002SC | Plain m4*10*t0.8 | ||
| S301030601SD | Plain m3*6*t0.5 | ||
| S301041004MZ | Plain m4*10*t0.8 | ||
| S301040803SD | Plain m4*8*t0.8 | ||
| S301040804SC | Plain m4*8*t0.8 | ||
| S301040802SD | Plain m4*8*t0.5 | ||
| S301040805SC | Plain m4*8*t0.5 | ||
| S301030803SD | Plain m3*8*t1 | ||
| S301030802SD | Plain m3*8*t0.5 | ||
| S301030801SC | Plain m3*8*t0.5 | ||
| S301030805MZ | Plain m3*8*t0.5 | ||
| S301030804SD | Plain m3*8*t0.3 | ||
| S301030701SD | Plain m3*7*t0.5 | ||
| S402120002KD | Spring m12 |
L, M, N54 parts
| S124030401SC | M3*4 | ||
| S660030603S1 | M3*6 | ||
| S660041001SE | M4*10 | ||
| S660041201SE | M4*12 | ||
| S660045501SE | M4*55 | ||
| S660051001SE | M5*10 | ||
| S660051201SE | M5*12 | ||
| S660051401SE | M5*14 | ||
| S660051801SE | M5*18 | ||
| S660030801MZ | M3*8 | ||
| S660030502MZ | M3*5 | ||
| S660031502MZ | M3*15 | ||
| S660030802S1 | M3*8 | ||
| S660040601SE | M4*6 | ||
| S660030604S1 | M3*6 | ||
| S660031802S1 | M3*18 | ||
| S660040602S1 | M4*6 | ||
| S660040802S1 | M4*8 | ||
| S660041002S1 | M4*10 | ||
| S660043001S1 | M4*30 | ||
| S660051002S1 | M5*10 | ||
| S660031803S1 | M3*18 | ||
| S660030505S1 | M3*5 | ||
| S660031504S1 | M3*15 | ||
| S660031002S1 | M3*10 | ||
| S660040801SE | M4*8 | ||
| S660031801SE | M3*18 | ||
| S124040601SC | M4*6 | ||
| S124030402SD | M3*4 | ||
| S124040802SC | M4*8 | ||
| S124040803SD | M4*8 | ||
| S124051001SC | M5*10 | ||
| S124051002SD | M5*10 | ||
| S124051501SD | M5*15 | ||
| S124081201SC | M8*12 | ||
| S124081202SD | M8*12 | ||
| S124081501SD | M8*15 | ||
| S124030501SC | M3*5 | ||
| S124030801SC | M3*8 | ||
| S124030502TC | M3*5 | ||
| S124030601SD | M3*6 | ||
| S660031601SE | M3*16 | ||
| S124040401SD | M4*4 | ||
| S124030602SC | M3*6 | ||
| S124030503SD | M3*5 | ||
| S124031002SD | M3*10 | ||
| S124041001SD | M4*10 | ||
| S124051201SD | M5*12 | ||
| S660480601SE | M2.6*6 | ||
| S660030601SE | M3*6 | ||
| S660030801SE | M3*8 | ||
| S660031001SE | M3*10 | ||
| S660031501SE | M3*15 | ||
| S660040803S1 | M4*8 |
Led Lighting (option)5 parts
| 030190340060 | Base:card ×1 | ||
| 645300470000 | Dc power supply : 24v:100w ×2 | ||
| 0J7101800000 | Lamp:led light: 16w ×3 | ||
| 644500260000 | Clamp:ackn-7 ×4 | ||
| 644501330000 | Spacer: hexagon :l10:m3 ×5 |
Operation Panel32 parts
| 0J0205100A00 | Controller :x21[a] ×1 | ||
| 0J3502600010 | Card:capacitor ×18 | ||
| 0J0603900A00 | Switch: emergency stop[a] ×31 | ||
| 511F05120S00 | Knobbed screw : no.2:m5*9[s] ×30 | ||
| 030210410010 | Pipe:controller ×29 | ||
| 030220870S00 | Clamp:controller holder[s] ×28 | ||
| 030221040000 | Holder:operation panel ×27 | ||
| 644500490000 | Dust cap: usb ×26 | ||
| 644501460000 | Dust cap:lan ×25 | ||
| 0J1405000S00 | Base:operation panel[s] ×24 | ||
| 0J1406600020 | Support panel base ×23 | ||
| 644500300000 | Spacer: hexagon ×22 | ||
| 0J3200700010 | Card:i/f connector ×21 | ||
| 0J1406500020 | Support:card base ×20 | ||
| 644500880000 | Spacer:hexagon ×19 | ||
| 0J1408500000 | Cover : usb ×17 | ||
| 0J1404200S20 | Operation panel : front[s] ×2 | ||
| 0J3200800000 | Card:usb connector ×16 | ||
| 0J1415400000 | Bracket : usb connector card ×15 | ||
| 644501750000 | Spacer: hexagon :l20:m3: under head 3mm ×14 | ||
| 645300490A01 | Lithium battery :xc[a] ×13 | ||
| 0J2306600A00 | Card:cpu:x21[a] ×12 | ||
| 0J1415100000 | Bracket:lcd ×11 | ||
| 641200250000 | Lcd:7 inch wide ×10 | ||
| 0J1415300000 | Base:panel card ×9 | ||
| 0J3505200000 | Card:switch :2 ×8 | ||
| 0J1404500000 | Operation button ×7 | ||
| 0J1404700000 | Cover lamp ×6 | ||
| 0J1414900000 | Cover:lcd panel ×5 | ||
| 0J1404400010 | Shutter:fdd ×4 | ||
| 0J1404300010 | Operation panel: rear ×3 | ||
| 030230170S10 | Base:emergency stop switch[s] ×32 |
Electrical Parts35 parts
| 646100090010 | Circuit protector :3-phase 10a ×1 | ||
| 0J5101100000 | Cover:power supply ×22 | ||
| 0J1108300000 | Box:breaker ×17 | ||
| 0J1108400000 | Cover :breaker box ×18 | ||
| 0J0605800T00 | No fuse breaker :3-phase 15a[t] ×19 | ||
| 0J1801800000 | Base: transformer : c ×20 | ||
| 0J0901400A30 | Transformer :separate :x13a[a] ×21 | ||
| 0J0902400A00 | Transformer: separate :x15[a] ×21 | ||
| 644500170000 | Nylon clamp:18n ×23 | ||
| 030790080000 | Box stick-on plate ×15 | ||
| 644501630000 | Stud:no.1:m4-30 ×24 | ||
| 644500690000 | One-touch collar : ta-310 ×25 | ||
| 644500890000 | Spacer: hexagon :l6 :m3 ×26 | ||
| 0J2503700000 | Card:usb hub ×27 | ||
| 0L222001@000 | Bracket: harness ×28 | ||
| 0222002@000 | Cover:harness ×29 | ||
| 505103020000 | Stud:no.1:m3-47.9 ×16 | ||
| S530030801SD | Truss head tapping screw :3p*8 ×14 | ||
| 03013013A000 | Bracket :breaker:a ×2 | ||
| 0J2101601030 | Card:power supply :single-phase ×7 | ||
| 03013013B000 | Bracket :breaker :b ×2 | ||
| 641400140000 | Noise filter: single-phase ×3 | ||
| 641400200000 | Noise filter:3-phase ×3 | ||
| 643400030000 | Terminal base :6p ×4 | ||
| 645300190011 | Dc power supply :24v ×5 | ||
| 645300030000 | Dc power supply :5v +/-12v ×6 | ||
| 0J2101600030 | Card:power supply :3-phase ×7 | ||
| 0J2703300040 | Card head:s5b ×13 | ||
| 0J0303500A10 | Xy-axis driver:x13-c[a] ×8 | ||
| 0J2502300050 | Card:machine ×9 | ||
| 03014003A010 | Holder harness :a ×10 | ||
| 0J0303300A10 | Main shaft driver: x13-a:200[a] ×11 | ||
| 0J0303400A10 | Main shaft driver:x13-b:400[a] ×11 | ||
| 0J4500200010 | Counter: electro-magnetic ×12 | ||
| 64450162@000 | Universal bushing : kg-010 ×30 |
Needle Bar Case 144 parts
| 09012001@030 | Needle bar case | ||
| 516503020010 | Thread guide collar :2mm dia. | ||
| 611200050000 | Parallel pin :4*16-h7 | ||
| 502308010010 | Split collar:no.1:8mm dia. | ||
| 502308020010 | Split collar:no.1:8mm dia. | ||
| 502408020010 | Split collar:no.2:8mm dia. | ||
| 502408010020 | Split collar: no.2:8mm dia. | ||
| 09033001@000 | Guide shaft : take up lever | ||
| 090310050A40 | Take-up lever[a] | ||
| 090310050S40 | Take-up lever[s] | ||
| 090310040010 | Boss: take-up lever | ||
| 08027006@020 | Rail guide | ||
| 090320010000 | Lever stopper | ||
| 507310040010 | Torsion spring: 1mm dia. | ||
| 09033002@000 | Spring hook bar | ||
| 08026001L000 | Bracket: change rod:l | ||
| 08026001R000 | Bracket:change rod:r | ||
| 511104010010 | Flat fillister head screw:m4*10 | ||
| QQ5@040@@000 | Change rod:6mm dia. | ||
| QQ4@040@@000 | Change rod:6mm dia. | ||
| 09044005@000 | Rail: case: lower | ||
| 0904500@@010 | Needle bar guide | ||
| 090410020010 | Needle bar | ||
| 09046007AA00 | Presser foot :a[a] | ||
| 507605030040 | Compression spring :0.5mm dia. | ||
| 090430040000 | Felt packing | ||
| 090430020010 | Damper ring:f | ||
| 090420090000 | Stopper: upper dead point | ||
| 511153030000 | Flat fillister head screw :9/64*10.5 | ||
| 090420060010 | Needle bar connecting stud | ||
| 507609060000 | Compression spring:0.9mm dia. | ||
| 09046023AA00 | Presser foot : a[a] | ||
| 090420020020 | Presser foot connecting stud | ||
| 616500080000 | Needle:db-k5z1 #11 | ||
| 090460230A00 | Presser foot[a] | ||
| 090460070A00 | Presser foot[a] | ||
| 090460230000 | Presser foot | ||
| 090460070000 | Presser foot | ||
| 090460040030 | Split collar :presser foot | ||
| 090470020010 | Flat fillister head screw : /18*44 | ||
| 090430070040 | Damper ring :a | ||
| 090420010S70 | Needle clamp[s] | ||
| 511754010010 | Slotted head set screw : 11/64*6b | ||
| 504506010010 | Screw joint:m6 |
R49 parts
| S301061102SC | Plain m6*11*t1.6 | ||
| S304051001TP | With teeth m5 | ||
| S402080001KC | Spring m8 | ||
| S402080002KD | Spring m8 | ||
| S402100001KC | Spring m10 | ||
| S402100002KD | Spring m10 | ||
| S402120001KC | Spring m12 | ||
| S305041101TP | Wave m4 | ||
| S305051001TN | Wave m5 | ||
| S305061051TN | Wave m6 | ||
| S304040851TP | With teeth m4 | ||
| S306080001SC | Slant m8 | ||
| S402060001KC | Spring m6 | ||
| S303040801SC | Disk spring m4 | ||
| S301041005EZ | Plain m4*10*t0.8 | ||
| S301470252MZ | Plain m2.5*5*t0.5 | ||
| S301030605SD | Plain m3*6*t1.0 | ||
| S301030604MZ | Plain m3*6*t0.5 | ||
| S305051101TN | Wave m5 | ||
| S301470253SD | Plain m2.5*5*0.5 | ||
| S301470251SC | Plain m2.5*5*t0.5 | ||
| S305101451TN | Wave m10 | ||
| S304080001TP | With teeth m8 | ||
| S402060002KD | Spring m6 | ||
| S402050003MZ | Spring m5 | ||
| S301061151SC | Plain m6*11.5*t0.8 | ||
| S301102601SC | Plain m10*26*t3.2 | ||
| S301061301SC | Plain m6*13*t1.0 | ||
| S301061302SD | Plain m6*13*t1.0 | ||
| S301061601SC | Plain m6*16*t1.0 | ||
| S301081601SD | Plain m8*16*t1.2 | ||
| S301081801SC | Plain m8*18*t1.6 | ||
| S301081802SD | Plain m8*18*t1.6 | ||
| S301081803SC | Plain m8*18*t3.2 | ||
| S301082201SC | Plain m8*22*t3.2 | ||
| S301102201SC | Plain m10*22*t1.6 | ||
| S301102602SD | Plain m10*26*t3.2 | ||
| S402050002KD | Spring m5 | ||
| S301122051SC | Plain m12*20.5*t2 | ||
| S301163201SD | Plain m16*32*t2.5 | ||
| S402020001KD | Spring m2 | ||
| S402480001KC | Spring m2.6 | ||
| S402030001KC | Spring m3 | ||
| S402030002KD | Spring m3 | ||
| S402530001KC | Spring m3.5 | ||
| S402040001KC | Spring m4 | ||
| S402040002KD | Spring m4 | ||
| S402050001KC | Spring m5 | ||
| S301061152SD | Plain m6*11.5*t0.8 |
Part numbers are listed for identification. Check the part number on your machine or use the free compatibility check before ordering.
Tajima TFMX Parts: common questions
Which Tajima TFMX parts do you sell?
We currently list 60+ parts and accessories for Tajima TFMX machines, including Belts, Pulleys & Gears (30), Needles & Needle Bars (9), Circuit Boards & Electronics (5), Motors & Drivers (5), Floppy, USB & Memory (3), Head & Mechanical Parts (2). Listings show the part number and compatible machines wherever the maker provides them.
How do I know a part fits my Tajima TFMX machine?
Match the part number on your old part with the listing, or use ISA, our free compatibility check: upload a photo of your part or machine label on any product page and get an answer in seconds, before you order.
Are import duties included?
Yes. Prices include import duty, so there are no customs fees to pay at delivery.
Do you ship worldwide?
Yes, every order ships with tracking. The delivery estimate for your country is shown on each product page, and you can follow your parcel on our tracking page.
